Respiratory Rate and Assessment of Secondary Production in the Holothuroid Holothuria tubulosa (Echinodermata) from Mediterranean Seagrass Beds

Abstract. Respiration in Holothuria tubulosa was investigated in individuals from the Posidonia oceanica meadow off Lacco Ameno (Ischia Island, Italy). Respiratory rates increase with increasing body weight and increasing sea water temperature. Oxygen consumption of an average individual (7g dw body wall) ranges from 0.409 (14 °C) to 1.300 (26 °C) mg O₂· h^-1. Data on population density, mean size of individuals, and annual sea water temperature variations allow an assessment of holothuroid production. Values of 45.65 and 13.75 kJ · m^-2· y^-1 were calculated for shallow (3 to 10 m) and deep (25 to 33 m) areas of the Posidonia meadow, respectively. Holothuroid production shows a bathymetric pattern similar to primary production of the Posidonia -epiphytes complex and the production of Posidonia litter.     

Wind-driven interannual variability over the northeast Pacific Ocean

Interannual variability of the sea surface height (SSH) over the northeast Pacific Ocean is hindcast with a reduced-gravity, quasi-geostrophic model that includes linear damping. The model is forced with monthly Ekman pumping fields derived from the NCEP reanalysis wind stresses. The numerical solution is compared with SSH observations derived from satellite altimeter data and gridded at a lateral resolution of 1 degree. Provided that the reduced gravity parameter is chosen appropriately, the results demonstrate that the model has significant hindcast skill over interior regions of the basin, away from continental boundaries. A damping time scale of 2 to 3 years is close to optimal, although the hindcast skill is not strongly dependent on this parameter.A simplification of the quasi-geostrophic model is considered in which Rossby waves are eliminated, yielding a Markov model driven by local Ekman pumping. The results approximately reproduce the hindcast skill of the more complete quasi-geostrophic model and indicate that the interannual SSH variability is dominated by the local response to wind forcing. There is a close correspondence the two leading empirical orthogonal modes of the local model and those of the observed SSH anomalies. The latter account for over half of the variance of the interannual signal over the region.     

The Regional Ocean Modeling System (ROMS) 4-dimensional variational data assimilation systems: Part II - Performance and application to the California Current System

The Regional Ocean Modeling System (ROMS) 4-dimensional variational (4D-Var) data assimilation systems have been systematically applied to the mesoscale circulation environment of the California Current to demonstrate the performance and practical utility of the various components of ROMS 4D-Var. In particular, we present a comparison of three approaches to 4D-Var, namely: the primal formulation of the incremental strong constraint approach; the dual formulation “physical-space statistical analysis system”; and the dual formulation indirect representer approach. In agreement with theoretical considerations all three approaches converge to the same ocean circulation estimate when using the same observations and prior information. However, the rate of convergence of the dual formulation was found to be inferior to that of the primal formulation. Other aspects of the 4D-Var performance that relate to the use of multiple outer-loops, preconditioning, and the weak constraint are also explored. A systematic evaluation of the impact of the various components of the 4D-Var control vector (i.e. the initial conditions, surface forcing and open boundary conditions) is also presented. It is shown that correcting for uncertainties in the model initial conditions exerts the largest influence on the ability of the model to fit the available observations. Various important diagnostics of 4D-Var are also examined, including estimates of the posterior error, the information content of the observation array, and innovation-based consistency checks on the prior error assumptions. Using these diagnostic tools, we find that more than 90% of the observations assimilated into the model provide redundant information. This is a symptom of the large percentage of satellite data that are used and to some extent the nature of the data processing employed. This is the second in a series of three papers describing the ROMS 4D-Var systems.     

Mixed terrigenous—Carbonate sedimentation in the Hispaniola—Caicos turbidite basin

Sedimentation in the 9500 km², 4100 m deep Hispaniòla—Caicos Basin is dominated by turbidity currents. Carbonate turbidites originate from the Bahama Islands, Great Inagua and Caicos at the north end of the basin. Mixed carbonate—non-carbonate flows come from Hispaniola and perhaps Cuba. Most flows originate on insular slopes rather than in shallow water. The relatively low CaCO₃ content of hemipelagic sequences throughout the entire basin reveals that the influence of non-carbonate Hispaniola—Cuba sources is widespread.The basin was sampled with closely spaced piston cores. Sand-layer isopach and frequency maps reveal four or five major basin entry points for turbidity currents. Flow size is proportional to the size of source areas. Average volumes of flows originating from Hispaniola—Cuba, the largest source, are 10⁹ m³. This compares to an average flow volume of 10⁶ m³ for flows derived from the smallest source area, the Southeastern Caicos Bank. Measures of turbidity-current activity, such as thickness and frequency, change in a regular fashion away from each entry point. Average lutite thickness (combining hemipelagic and turbiditic lutite) are greatest near the basin entry points. On the abyssal plain occupying the south half of the basin, Bouma turbidite sedimentary structure sequences tend to be complete. However, on the Caicos Fan, the sedimentary structure sequences in turbidites are characterized by missing or repeated units. Six radiocarbon dates of two widespread presumed pelagic units in the basin yielded younger dates in stratigraphically older positions. The reversed dates are assumed to reflect storm erosion of older sediment on adjacent insular shelves.Consideration of a north—south reflection seismic profile over the basin indicates that the present sediment regimen has pertained through much of the Neogene. The coherence, convergence and termination of reflections in the seismic section are consistent with and tend to confirm conclusions based on the core study regarding the greater extent and volume of sediment deposits derived from the Hispaniola source area.     

Sediment yield and storage variations in the Négron River catchment (south western Parisian Basin,France) during the Holocene period

In the Négron River catchment area (162 km²), surface‐sediment stores are composed of periglacial calcareous ‘grèze’ (5 × 10⁶ t) and loess (21 × 10⁶ t), and Holocene alluvium (12·6 × 10⁶ t), peat (0·6 × 10⁶ t) and colluvium (18·5 × 10⁶ t). Seventy‐five per cent of the Holocene sediments is stored along the thalwegs. Present net sediment yield, calculated from solid discharge at the Négron outlet, is low (0·6 t km^?2 a^?1) due to the dominance of carbonate rocks in the catchment. Mean sediment yield during the Holocene period is 7·0 t km^?2 a^?1 from alluvium stores and 7·6 t km^?2 a^?1 from colluvium stores. Thus, the gross sediment yield during the Holocene period is about 18·7 t km^?2 a^?1 and the sediment delivery ratio 3 per cent. The yield considerably varies from one sub‐basin to another (3·9 to 24·5 t km^?2 a^?1) according to lithology: about 25 per cent and 50 per cent of initial stores of periglacial grèze and loess respectively were reworked during the Holocene period. Sediment yield has increased by a factor of 6 in the last 1000 years, due to the development of agriculture. The very high rate of sediment storage on the slope during that period (88 per cent of the yield) can be accounted for by the formation of cultivation steps (‘rideaux’). It is predicted that the current destruction of these steps will result in a sediment wave reaching the valley floors in the coming decades. Subboreal and Subatlantic sediments and pollen assemblages in the Taligny marsh, where one‐third of the alluvium is stored, show the predominant influence of human activity during these periods in the Négron catchment. Copyright © 2002 John Wiley & Sons, Ltd.     

Biogeochemical control on the temporal variability of trace element concentrations in the Oubangui river (Central African Republic)

Dissolved Ba, Cd, Co, Mn, Mo, Ni, Rb, Sb, Sr, U and V were measured in the Oubangui river (Central African Republic) during a complete flood period. The dissolved concentrations vary by factors ranging from 1.4 to 8.2 as a function of river discharge: Sr, Ba, Rb and Mo concentrations decrease with rising stage; Ni, U, Sb, Cd, V and Mn concentrations increase with rising stage. These distributions are explained by a mixing of quick flow, mostly surface runoff with delayed flow, mostly groundwater. The dual origin of stream waters is demonstrated by the major element ratios, which are close to a silicate end-member during the high-flow period and trend towards a carbonate end-member during the low-flow period. Moreover, geological heterogeneities in the Oubangui basin may play a role in the variation of concentrations observed at the basin outlet. The previously indicated presence of a subsurface carbonate sequence in the lower part of the basin is confirmed. Cd, V, Mn and Co show peak concentrations during decreasing stage. We suggest that biological processes such as release from phytoplanktonic material and dissolution of oxides or carbonate phases may explain this maximum.     

Field characterization and data integration to define the hydraulic heterogeneity of a shallow granular aquifer at a sub-watershed scale

Providing a sound basis for aquifer management or remediation requires that hydrogeological investigations carried out to understand groundwater flow and contaminant transport be based on representative data that capture the heterogeneous spatial distribution of aquifer hydraulic properties. This paper describes a general workflow allowing the characterization of the heterogeneity of the hydraulic properties of granular aquifers at an intermediate scale of a few km². The workflow involves characterization and data integration steps that were applied on a 12-km² study area encompassing a decommissioned landfill emitting a leachate plume and its main surface water receptors. The sediments composing the aquifer were deposited in a littoral–sublittoral environment and show evidence of small-scale transitional heterogeneities. Cone penetrometer tests (CPT) combined with soil moisture and electrical resistivity (SMR) measurements were thus used to identify and characterize spatial heterogeneities in hydraulic properties over the study area. Site-specific statistical relationships were needed to infer hydrofacies units and to estimate hydraulic properties from high-resolution CPT/SMR soundings distributed all over the study area. A learning machine approach was used due to the complex statistical relationships between colocated hydraulic and CPT/SMR data covering the full range of aquifer materials. Application of this workflow allowed the identification of hydrofacies units and the estimation of horizontal hydraulic conductivity, vertical hydraulic conductivity and porosity over the study area. The paper describes and discusses data acquisition and integration methodologies that can be adapted to different field situations, while making the aquifer characterization process more time-efficient and less labor-intensive.