From outwash to coastal systems in the Portneuf–Forestville deltaic complex (Québec North Shore): Anatomy of a forced regressive deglacial sequence

Deglacial sequences typically include backstepping grounding zone wedges and prevailing glaciomarine depositional facies. However, in coastal domains, deglacial sequences are dominated by depositional systems ranging from turbiditic to fluvial facies. Such deglacial sequences are strongly impacted by glacio‐isostatic rebound, the rate and amplitude of which commonly outpaces those of post‐glacial eustatic sea‐level rise. This results in a sustained relative sea‐level fall covering the entire depositional time interval. This paper examines a Late Quaternary, forced regressive, deglacial sequence located on the North Shore of the St. Lawrence Estuary (Portneuf Peninsula, Québec, Canada) and aims to decipher the main controls that governed its stratigraphic architecture. The forced regressive deglacial sequence forms a thick (>100 m) and extensive (>100 km²) multiphased deltaic complex emplaced after the retreat of the Laurentide Ice Sheet margin from the study area ca 12 500 years ago. The sedimentary succession is composed of ice‐contact, glaciomarine, turbiditic, deltaic, fluvial and coastal depositional units. A four‐stage development is recognized: (i) an early ice‐contact stage (esker, glaciomarine mud and outwash fan); (ii) an in‐valley progradational stage (fjord head or moraine‐dammed lacustrine deltas) fed by glacigenics; (iii) an open‐coast deltaic progradation, when proglacial depositional systems expanded beyond the valley outlets and merged together; and (iv) a final stage of river entrenchment and shallow marine reworking that affected the previously emplaced deltaic complex. Most of the sedimentary volume (10 to 15 km³) was emplaced during the three‐first stages over a ca 2 kyr interval. In spite of sustained high rates of relative sea‐level fall (50 to 30 mm·year^?1), delta plain accretion occurred up to the end of the proglacial open‐coast progradational stage. River entrenchment only occurred later, after a significant decrease in the relative sea‐level fall rates (<30 mm·year^?1), and was concurrent with the formation and preservation of extensive coastal deposits (raised beaches, spit platform and barrier sands). The turnaround from delta plain accretion to river entrenchment and coastal erosion is interpreted to be a consequence of the retreat of the ice margin from the river drainage basins that led to the drastic drop of sediment supply and the abrupt decrease in progradation rates. The main internal stratigraphic discontinuity within the forced regressive deglacial sequence does not reflect changes in relative sea‐level variations.     

Instrumentation Development for In Situ 40Ar/39Ar Planetary Geochronology

The chronology of the Solar System, particularly the timing of formation of extra‐terrestrial bodies and their features, is an outstanding problem in planetary science. Although various chronological methods for in situ geochronology have been proposed (e.g., Rb‐Sr, K‐Ar), and even applied (K‐Ar), the reliability, accuracy, and applicability of the ⁴⁰Ar/³⁹Ar method makes it by far the most desirable chronometer for dating extra‐terrestrial bodies. The method however relies on the neutron irradiation of samples, and thus a neutron source. Herein, we discuss the challenges and feasibility of deploying a passive neutron source to planetary surfaces for the in situ application of the ⁴⁰Ar/³⁹Ar chronometer. Requirements in generating and shielding neutrons, as well as analysing samples are described, along with an exploration of limitations such as mass, power and cost. Two potential solutions for the in situ extra‐terrestrial deployment of the ⁴⁰Ar/³⁹Ar method are presented. Although this represents a challenging task, developing the technology to apply the ⁴⁰Ar/³⁹Ar method on planetary surfaces would represent a major advance towards constraining the timescale of solar system formation and evolution.     

The gold content of volcanogenic massive sulfide deposits

Volcanogenic massive sulfide deposits contain variable amounts of gold, both in terms of average grade and total gold content, with some VMS deposits hosting world-class gold mines with more than 100?t Au. Previous studies have identified gold-rich VMS as having an average gold grade, expressed in g/t, exceeding the total abundance of base metals, expressed in wt.%. However, statistically meaningful criteria for the identification of truly anomalous deposits have not been established. This paper presents a more extensive analysis of gold grades and tonnages of 513 VMS deposits worldwide, revealing a number of important features in the distribution of the data. A large proportion of deposits are characterized by a relatively low gold grade (<2?g/t), with a gradual decrease in frequency towards maximum gold grades, defining a log-normal distribution. In the analysis presented in this paper, the geometric mean and geometric standard deviation appear to be the simplest metric for identifying subclasses of VMS deposits based on gold grade, especially when comparing deposits within individual belts and districts. The geometric mean gold grade of 513 VMS deposits worldwide is 0.76?g/t; the geometric standard deviation is +2.70?g/t Au. In this analysis, deposits with more than 3.46?g/t Au (geometric mean plus one geometric standard deviation) are considered auriferous. The geometric mean gold content is 4.7?t Au, with a geometric standard deviation of +26.3?t Au. Deposits containing 31?t Au or more (geometric mean plus one geometric standard deviation) are also considered to be anomalous in terms of gold content, irrespective of the gold grade. Deposits with more than 3.46?g/t Au and 31?t Au are considered gold-rich VMS. A large proportion of the total gold hosted in VMS worldwide is found in a relatively small number of such deposits. The identification of these truly anomalous systems helps shed light on the geological parameters that control unusual enrichment of gold in VMS. At the district scale, the gold-rich deposits occupy a stratigraphic position and volcanic setting that commonly differs from other deposits of the district possibly due to a step change in the geodynamic and magmatic evolution of local volcanic complexes. The gold-rich VMS are commonly associated with transitional to calc-alkaline intermediate to felsic volcanic rocks, which may reflect a particularly fertile geodynamic setting and/or timing (e.g., early arc rifting or rifting front). At the deposit scale, uncommon alteration assemblages (e.g., advanced argillic, aluminous, strongly siliceous, or potassium feldspar alteration) and trace element signatures may be recognized (e.g., Au?CAg?CAs?CSb ± Bi?CHg?CTe), suggesting a direct magmatic input in some systems.     

Reconnaissance geochronology of basement rocks from the Amazonas and Maranhão Basins in Brazil

Rb/Sr whole rock as well as K/Ar whole rock and mineral age determinations have been carried out on drill core samples obtained from the crystalline basement underlying the Amazonas and Maranhão Basins in Brazil. The data confirm the existence of an ancient basement under the Upper and Middle Amazonas Basin. The primary age of the granitic rocks is estimated at about 1560 Ma which correlates with recent age data obtained on granitic rocks on both sides of the Amazonas syneclise. In some areas the K/Ar ages show a decrease probably due to the effect of the Nickerie thermal episode described previously in the Guayana Shield.In the basement of the interconnected Lower Amazonas and Maranhão Basins Late Precambrian (Caririan) metamorphism and igneous activity seems to have been pervasive. The data allow the continuation of the Brazilian age province known in northeastern Brazil under the Maranhão Basin, linking this province to the Brasilia-Paraguay orogenic belt of similar age.     

Genesis and diagnostic value of soft-sediment deformation structures—A review

Soft-sediment deformation structures are recognized as important diagnostic features in the rock record for determination of depositional environments and slope processes. The diagnostic value of these structures is reevaluated by analysis of the parameters controlling sediment deformation. Soft-sediment deformation is contemporaneous with deposition and occurs dominantly in course silt to fine sand. The high depositional rate, low permeability and low shear strength of grains within this sediment range maximize the occurrence of deformation. The dominant mechanisms responsible for sediment deformation include: (1) liquefaction or fluidization; (2) reverse density gradation; (3) slumping or slope failure; and (4) shear stress. In most cases a combination of these mechanisms occurs. The processes function in a continuum, producing features that are microscopic to megascopic in scale. It is shown that the processes, and thus the structures, are not environment specific. The true diagnostic value of the structures may be in defining hydrodynamic conditions, and in interpreting paleocurrents and paleoclimatic and paleoseismic events. Ultimately, for the best diagnostic results, soft-sediment deformation structures should be studied in association with all other available lithologic, structural and paleontological information.     

Kepone®: Toxicity and bioaccumulation in blue crabs

Two long-term studies were conducted to determine toxicity, uptake and depuration of Kepone in blue crabs (Callinectes sapidus). In the first, Kepone was administered to crabs in seawater (0.03 or 0.3 μg Kepone/I) or food (eastern oyster,Crassostrea virginica, containing 0.25 μg/g Kepone). Uptake of Kepone in 28 days was primarily through the contaminated oysters. When these crabs were held in Kepone-free seawater and fed Kepone-free oysters for 28 days, no loss of the insecticide was evident. There were adverse effects on molting and survival in crabs fed oysters that contained 0.25 μg/g Kepone. A second study was conducted to determine: (1) the depuration of Kepone over a 90-day period in blue crabs fed oysters from the James River, Virginia (containing 0.15 μg/g Kepone); and (2) the effects of Kepone on molting and survival of blue crabs fed James River oysters or laboratory-contaminated oysters that contained 0.15 or 1.9 μg/g Kepone. Crabs fed Kepone-contaminated oysters followed by a diet of Kepone-free oysters for 90 days had detectable concentrations of the insecticide in tissues. Also, blue crabs that ate oysters containing Kepone in concentrations similar to those found in oysters from the James River, died or molted less frequently than crabs fed Kepone-free oysters meats.     

Seasonal distribution of sulfur fractions in Louisiana salt marsh soils

The profile distributions of specific sulfur forms were examined at a site in a Louisiana salt marsh over a 1-yr period. Soil samples were fractionated into acid-volatile sulfides, HCl-soluble sulfur, elemental sulfur, pyrite sulfur, ester-sulfate sulfur, carbon-bonded sulfur, and total sulfur. Inorganic sulfur constituted 16% to 36% of total sulfur, with pyrite sulfur representing <2%. Pyrite sulfur content in marsh soil was relatively high in winter. Pyrite sulfur and elemental sulfur together accounted for 4% to 24% of the inorganic sulfur fraction. Between 74% and 95% of inorganic sulfur was present as the HCl-soluble sulfur form. A significant negative correlation between acid-volatile sulfides and elemental sulfur observed in summer suggested the transformation of fulfides to elemental sulfur. Organic sulfur, in the forms of ester-sulfate sulfur and carbon-bonded sulfur, predominated in all sampling periods, comprising 64% to 84% of total sulfur. The conversion of ester-sulfate sulfur into carbon-bonded sulfur was more likely to occur in winter than in other seasons. Carbon-bonded sulfur accounted for 53% to 89% of the organic sulfur. Organic sulfur was the major contributor to the variation of total sulfur in all seasons studied. Total sulfur concentration showed a statistically significant increase with depth.     

Morphological signatures of deglaciation and postglacial sedimentary processes in a deep fjord-lake (Grand Lake,Labrador)

High-resolution multibeam bathymetric data and acoustic sub-bottom profiles were recently collected in Grand Lake (Labrador), one of the deepest lake basins in eastern North America, to reconstruct: (1) the retreat of the Laurentide Ice Sheet (LIS) west of Lake Melville and (2) the history of sedimentation since deglaciation in this 54 km-long, 3 km-wide fjord-lake. Our results provide a morphostratigraphical framework that brings new insights to the style and pattern of retreat of the LIS in the region, as well as deglacial and postglacial sedimentary dynamics. Terrestrial glacial lineations observed on a digital elevation model (DEM) provide evidence of a previously undocumented ice stream in the Grand Lake area. This newly mapped ice stream suggests that the calving bay formed in Lake Melville triggered a reorganization of the regional drainage pattern of the LIS. The sedimentary infill of Grand Lake consists of a sequence of deglacial to postglacial sediments that contain deposits related to a series of mass movements. The 8.2 cal ka BP cold event is recorded in Grand Lake by a series of closely spaced moraines deposited at the outlet of the fjord-lake to form a morainic complex similar to the Cockburn morainic complex on Baffin Island. During deglaciation, a dense dendritic network of proglacial gullies incised into the steep sidewalls of the lake. Since deglaciation, paraglacial and postglacial sedimentation has led to the deposition of large prograding deltas at the fjord head, where density currents remain active today and have formed a series of sediment waves on the frontal slopes and a prodeltaic environment. © 2019 John Wiley & Sons, Ltd.     

Testing GISS-MM5 physics configurations for use in regional impacts studies

The Mesoscale Modeling System Version 5 (MM5) was one-way nested to the Goddard Institute for Space Studies global climate model (GISS GCM), which provided the boundary conditions for present (1990s) and future (IPCC SRES A2 scenario, 2050s) five-summer “time-slice” simulations over the continental and eastern United States. Five configurations for planetary boundary layer, cumulus parameterization, and radiation scheme were tested, and one set was selected for use in the New York City Climate and Health Project—a multi-disciplinary study investigating the effects of climate change and land-use change on human health in the New York metropolitan region. Although hourly and daily data were used in the health project, in this paper we focus on long-term current and projected mean climate change. The GISS-MM5 was very sensitive to the choice of cumulus parameterization and planetary boundary layer scheme, leading to significantly different temperature and precipitation outcomes for the 1990s. These differences can be linked to precipitation type (convective vs. non-convective), to their effect on solar radiation received at the ground, and ultimately to surface temperature. The projected changes in climate (2050s minus 1990s) were not as sensitive to choice of model physics combination. The range of the projected surface temperature changes at a given grid point among the model versions was much less than the mean change for all five model configurations, indicating relative consensus for simulating surface temperature changes among the different model projections. The MM5 versions, however, offer less consensus regarding 1990s to 2050s changes in precipitation amounts. All of the projected 2050s temperature changes were found to be significant at the 95th percent confidence interval, while the majority of the precipitation changes were not.     

Preparing for climate change in Washington State

Climate change is expected to bring potentially significant changes to Washington State’s natural, institutional, cultural, and economic landscape. Addressing climate change impacts will require a sustained commitment to integrating climate information into the day-to-day governance and management of infrastructure, programs, and services that may be affected by climate change. This paper discusses fundamental concepts for planning for climate change and identifies options for adapting to the climate impacts evaluated in the Washington Climate Change Impacts Assessment. Additionally, the paper highlights potential avenues for increasing flexibility in the policies and regulations used to govern human and natural systems in Washington.