Impact of aerosols present in Titan's atmosphere on the CASSINI radar experiment

Simulations of Titan's atmospheric transmission and surface reflectivity have been developed in order to estimate how Titan's atmosphere and surface properties could affect performances of the Cassini radar experiment. In this paper we present a selection of models for Titan's haze, vertical rain distribution, and surface composition implemented in our simulations. We collected dielectric constant values for the Cassini radar wavelength (∼2.2 cm) for materials of interest for Titan: liquid methane, liquid mixture of methane-ethane, water ice, and light hydrocarbon ices. Due to the lack of permittivity values for Titan's haze particles in the microwave range, we performed dielectric constant (ε_r) measurements around 2.2 cm on tholins synthesized in laboratory. We obtained a real part of ε_r in the range of 2-2.5 and a loss tangent between 10⁻³ and 5×10⁻². By combining aerosol distribution models (with hypothetical condensation at low altitudes) to surface models, we find the following results: (1) Aerosol-only atmospheres should cause no loss and are essentially transparent for Cassini radar, as expected by former analysis. (2) However, if clouds are present, some atmospheric models generate significant attenuation that can reach −50 dB, well below the sensitivity threshold of the receiver. In such cases, a 13.78 GHz radar would not be able to measure echoes coming from the surface. We thus warn about possible risks of misinterpretation if a “wet atmosphere” is not taken into account. (3) Rough surface scattering leads to a typical response of ∼−17 dB. These results will have important implications on future Cassini radar data analysis.     

High Temporal Resolution Spectroscopic Observations of the Flare Star V1054 Oph

We present the results of a high temporal resolution spectroscopic monitoring of the flare (UV Cet type) star V1054 Oph (Wolf 630AB), classified as a dM3.5e visual binary system. Intermediate resolution spectra have been taken during four nights (2–5 April 2001) using the IDS spectrograph of the 2.5 m Isaac Newton Telescope (INT) (La Palma, Canary Islands, Spain). The V1054 Oph spectra show very strong emission lines even in its quiescent state. The analysis of the temporal evolution of the observed emission lines (from H_β to H₁₁ and the Ca II H and K lines) reveals four strong flares and several weak flares. We have studied in detail the behaviour of the chromospheric lines during the different phases (pre-flare, impulsive and gradual decay) of these flares. The observed flares last from ～25 to 95 min. The equivalent width of the H_β line changes by a factor up to ～2.3. Broad wings and asymmetric (red-shifted) lines are observed as well.     

The Planck High Frequency Instrument, a third generation CMB experiment, and a full sky submillimeter survey

The High Frequency Instrument (HFI) of Planck is the most sensitive CMB experiment ever planned. Statistical fluctuations (photon noise) of the CMB itself will be the major limitation to the sensitivity of the CMB channels. Higher frequency channels will measure galactic foregrounds. Together with the Low Frequency Instrument, this will make a unique tool to measure the full sky and to separate the various components of its spectrum. Measurement of the polarization of these various components will give a new picture of the CMB. In addition, HFI will provide the scientific community with new full sky maps of intensity and polarization at six frequencies, with unprecedented angular resolution and sensitivity. This paper describes the logics that prevailed to define the HFI and the performances expected from this instrument. It details several features of the HFI design that has not been published up to now.     

9. Life On Earth... And Elsewhere?

This concluding chapter is divided into two main parts. The first part is a summary of the main facts and events which constitute the present body of knowledge of the chronology of life in the solar system, in the form of “highlights” in astronomy, geology, chemistry and biology. The second part raises the interrogation “Is life universal?”, and tries to provide answers based on these facts and events. These answers turn out to differ widely among the various disciplines, depending on how far they feel able to extrapolate their current knowledge.     

Amino acid photostability on the Martian surface

Abstract— In the framework of international planetary exploration programs, several space missions are planned to search for organics and bio‐signatures on Mars. Previous attempts have not detected any organic compounds in the Martian regolith. It is therefore critical to investigate the processes that may affect organic molecules on and below the planet's surface. Laboratory simulations can provide useful data about the reaction pathways of organic material at Mars' surface. We have studied the stability of amino acid thin films against ultraviolet (UV) irradiation and use those data to predict the survival time of these compounds on and in the Martian regolith. We show that thin films of glycine and D‐alanine are expected to have half‐lives of 22 ± 5 hr and of 3 ± 1 hr, respectively, when irradiated with Mars‐like UV flux levels. Modelling shows that the half‐lives of the amino acids are extended to the order of 10⁷ years when embedded in regolith. These data suggest that subsurface sampling must be a key component of future missions to Mars dedicated to organic detection.     

The effects of Martian near surface conditions on the photochemistry of amino acids

In order to understand the complex multi-parameter system of destruction of organic material on the surface of Mars, step-by-step laboratory simulations of processes occurring on the surface of Mars are necessary. This paper describes the measured effects of two parameters, a CO₂ atmosphere and low temperature, on the destruction rate of amino acids when irradiated with Mars-like ultraviolet light (UV). The results show that the presence of a 7 mbar CO₂ atmosphere does not affect the destruction rate of glycine, and that cooling the sample to 210 K (average Mars temperature) lowers the destruction rate by a factor of 7. The decrease in the destruction rate of glycine by cooling the sample is thought to be predominantly caused by the slower reaction kinetics. When these results are scaled to Martian lighting conditions, cold thin films of glycine are assumed to have half-lives of 250 h under noontime peak illumination. It has been hypothesised that the absence of detectable native organic material in the Martian regolith points to the presence of oxidising agents. Some of these agents might form via the interaction of UV with compounds in the atmosphere. Water, although a trace component of Mars’ atmosphere, is suggested to be a significant source of oxidising species. However, gaseous CO₂ or adsorbed H₂O layers do not influence the photodestruction of amino acids significantly in the absence of reactive soil. Other mechanisms such as chemical processes in the Martian regolith need to be effective for rapid organic destruction.     

Impact‐induced hydrothermal activity within the Haughton impact structure,arctic Canada: Generation of a transient,warm, wet oasis

Abstract— Field studies and analytical scanning electron microscopy indicate that a hydrothermal system was created by the interaction of water with hot, impact‐generated rocks following formation of the 24 km diameter, 23 Ma Haughton impact structure. Hydrothermal alteration is recognized in two settings: within polymict impact breccias overlying the central portion of the structure, and within localized pipes in impact‐generated concentric fault systems. The intra‐breccia alteration comprises three varieties of cavity and fracture filling: (a) sulfide with carbonate, (b) sulfate, and (c) carbonate. These are accompanied by subordinate celestite, barite, fluorite, quartz and marcasite. Selenite is also developed, particularly in the lower levels of the impact breccia sheet. The fault‐related hydrothermal alteration occurs in 1–7 m diameter subvertical pipes that are exposed for lengths of up 20 m. The pipes are defined by a monomict quartz‐carbonate breccia showing pronounced Fe‐hydroxide alteration. Associated sulfides include marcasite, pyrite and chalcopyrite. We propose three distinct stages in the evolution of the hydrothermal system: (1) Early Stage (>200 °C), with the precipitation of quartz (vapor phase dominated); (2) Main Stage (200‐100 °C), with the development of a two‐phase (vapor plus liquid) zone, leading to calcite, celestite, barite, marcasite and fluorite precipitation; and (3) Late Stage (<100 °C), with selenite and fibroferrite development through liquid phase‐dominated precipitation. We estimate that it took several tens of thousands of years to cool below 50 °C following impact. During this time, Haughton supported a 14 km diameter crater lake and subsurface water system, providing a warmer, wetter niche relative to the surrounding terrain. The results reveal how understanding the internal structure of impact craters is necessary in order to determine their plumbing and cooling systems.     

Analytical solutions of long nonlinear internal waves: Part I

The Gardner equation is an extension of the Korteweg–de Vries (KdV) equation. It exhibits basically the same properties as the classical KdV, but extends its range of validity to a wider interval of the parameters of the internal wave motion for a given environment. In this paper, we derive exact solitary wave solutions for the generalized Gardner equation that includes nonlinear terms of any order. Unlike previous studies, the exact solutions are derived without assuming their mathematical form. Illustrative examples for internal solitary waves are also provided. The traveling wave solutions can be used to specify initial data for the incident waves in internal waves numerical models and for the verification and validation of the associated computed solutions.     

Integrating anthropogenic factors, geomorphological indicators and local knowledge in the analysis of coastal flooding and erosion hazards

The settlement and development of Québec’s maritime coastline has generally taken place without consideration for coastal dynamics and coastal hazards. Consequently, fighting coastal erosion has become a necessity. Until now, the construction of rigid walls and encroachments has been the preferred approach to the problem. In the Chaleur Bay region, coastal communities are particularly vulnerable to erosion and flooding because a number of residential, commercial and transportation infrastructures have been installed on beach terraces and sand spits. Recent storms, such as the storm of December 2, 2005, have made possible a better understanding of how these rigid defence structures amplify the effects of storm surges and waves. These structures drive the sand away from the coast, lowering beach levels and even causing beaches to vanish entirely from the areas situated in front of the defence structures. The end result is a weakening of the natural capacity of these coastal systems to absorb the energy of waves and a greater risk of coastal flooding. An integrated approach using local knowledge on the one hand, along with LIDAR surveys and a DGPS system on the other hand, have made possible to map the levels reached by flooding at the time of the storm. The results indicate that such levels vary greatly in spatial terms and that the difference between the levels actually reached and the water level measured by tide gauge can be as much as 2 m; a difference that is due to anthropogenic perturbations. This raises questions concerning the safety and the reference levels used for mapping coastal flooding risk. Taking into account knowledge of local communities, analysis of water levels, geomorphological indicators and aggravating anthropogenic factors, an approach and basic criteria are put forward with a view of establishing a reference level for the mapping of flood risk that can be used by community land-use planners.