Space- and ground-based measurements of sulphur dioxide emissions from Turrialba Volcano (Costa Rica)

Remotely sensed measurements of sulphur dioxide (SO₂) emitted by Turrialba Volcano (Costa Rica) are reported for the period September 2009–January 2011. These measurements were obtained using images from Advanced Spaceborne Thermal Emission and Reflexion radiometer, Ozone Monitoring Instrument and a ground-based UV camera. These three very different instruments provide flux measurements in good agreement with each other, which demonstrate that they can be integrated for monitoring SO₂ fluxes. Fluxes from Turrialba increased fourfold in January 2010, following a phreatic explosion that formed a degassing vent in the W crater of Turrialba. Since then, the SO₂ flux has remained high (30–50?kg/s) but seems to be showing a slowly decreasing trend. We interpret this evolution as the start of open vent degassing from a recently intruded magma body. The opening of the degassing vent decreased the confining pressure of the magma body and allowed the gases to bypass the hydrothermal system.     

In situ tensile fracture toughness of surficial cohesive marine sediments

This study reports the first in situ measurements of tensile fracture toughness, K _IC, of soft, surficial, cohesive marine sediments. A newly developed probe continuously measures the stress required to cause tensile failure in sediments to depths of up to 1 m. Probe measurements are in agreement with standard laboratory methods of K _IC measurements in both potter’s clay and natural sediments. The data comprise in situ depth profiles from three field sites in Nova Scotia, Canada. Measured K _IC at two muddy sites (median grain size of 23–50 μm) range from near zero at the sediment surface to >1,800 Pa m^1/2 at 0.2 m depth. These profiles also appear to identify the bioturbated/mixed depth. K _IC for a sandy site (>90% sand) is an order of magnitude lower than for the muddy sediments, and reflects the lack of cohesion/adhesion. A comparison of K _IC, median grain size, and porosity in muddy sediments indicates that consolidation increases fracture strength, whereas inclusion of sand causes weakening; thus, sand-bearing layers can be easily identified in K _IC profiles. K _IC and vane-measured shear strength correlate strongly, which suggests that the vane measurements should perhaps be interpreted as shear fracture toughness, rather than shear strength. Comparison of in situ probe-measured values with K _IC of soils and gelatin shows that sediments have a K _IC range intermediate between denser compacted soils and softer, elastic gelatin.     

Food web structure within kelp holdfasts (Laminaria): a stable isotope study

Kelp holdfasts are highly reticulated structures which host a large diversity of small fauna. These microhabitats have been reported to play a crucial role in the biodiversity associated to kelp forest ecosystems. This study aimed at identifying trophic links and the main food sources sustaining food webs within communities associated with kelp holdfasts, through a stable isotope (δ¹³C and δ¹⁵N) approach. Sampling of the main invertebrates inhabiting Laminaria digitata holdfasts, and of their potential food sources, took place in February and May 2007. Stable isotope results reveal that most of the primary consumers, including filter-feeders and deposit-feeders, rely on the particulate organic matter sedimented within kelp holdfasts. Only three grazers departed from this general pattern. The correspondence between the stable isotope ratios of predators and sediment consumers indicated that this source is at the base of the main pathway through which energy and matter transit in the food web. δ¹⁵N ranges found for consumers revealed that the food web associated with kelp holdfasts is composed of 3.5 levels. In spite of the low diversity of food sources at the base of the food web, these microhabitats can therefore be considered micro-scale ecosystems, from a functional perspective.     

The toxicological interaction between ocean acidity and metals in coastal meiobenthic copepods

Increased atmospheric CO₂ concentrations are causing greater dissolution of CO₂ into seawater, and are ultimately responsible for today’s ongoing ocean acidification. We manipulated seawater acidity by addition of HCl and by increasing CO₂ concentration and observed that two coastal harpacticoid copepods, Amphiascoides atopus and Schizopera knabeni were both more sensitive to increased acidity when generated by CO₂. The present study indicates that copepods living in environments more prone to hypercapnia, such as mudflats where S. knabeni lives, may be less sensitive to future acidification. Ocean acidification is also expected to alter the toxicity of waterborne metals by influencing their speciation in seawater. CO₂ enrichment did not affect the free-ion concentration of Cd but did increase the free-ion concentration of Cu. Antagonistic toxicities were observed between CO₂ with Cd, Cu and Cu free-ion in A. atopus. This interaction could be due to a competition for H⁺ and metals for binding sites.     

Environmental Radioxenon Levels in Europe: a Comprehensive Overview

Activity concentration data from ambient radioxenon measurements in ground level air, which were carried out in Europe in the framework of the International Noble Gas Experiment (INGE) in support of the development and build-up of a radioxenon monitoring network for the Comprehensive Nuclear-Test-Ban Treaty verification regime are presented and discussed. Six measurement stations provided data from 5 years of measurements performed between 2003 and 2008: Longyearbyen (Spitsbergen, Norway), Stockholm (Sweden), Dubna (Russian Federation), Schauinsland Mountain (Germany), Bruyères-le-Châtel and Marseille (both France). The noble gas systems used within the INGE are designed to continuously measure low concentrations of the four radioxenon isotopes which are most relevant for detection of nuclear explosions: ^131mXe, ^133mXe, ¹³³Xe and ¹³⁵Xe with a time resolution less than or equal to 24 h and a minimum detectable concentration of ¹³³Xe less than 1 mBq/m³. This European cluster of six stations is particularly interesting because it is highly influenced by a high density of nuclear power reactors and some radiopharmaceutical production facilities. The activity concentrations at the European INGE stations are studied to characterise the influence of civilian releases, to be able to distinguish them from possible nuclear explosions. It was found that the mean activity concentration of the most frequently detected isotope, ¹³³Xe, was 5–20 mBq/m³ within Central Europe where most nuclear installations are situated (Bruyères-le-Châtel and Schauinsland), 1.4–2.4 mBq/m³ just outside that region (Stockholm, Dubna and Marseille) and 0.2 mBq/m³ in the remote polar station of Spitsbergen. No seasonal trends could be observed from the data. Two interesting events have been examined and their source regions have been identified using atmospheric backtracking methods that deploy Lagrangian particle dispersion modelling and inversion techniques. The results are consistent with known releases of a radiopharmaceutical facility.     

Mixed estimation methods for Halphen distributions with applications in extreme hydrologic events

The Halphen family of distributions is a flexible and complete system to fit sets of observations independent and identically distributed. Recently, it is shown that this family of distributions represents a potential alternative to the generalized extreme value distributions to model extreme hydrological events. The existence of jointly sufficient statistics for parameter estimation leads to optimality of the method of maximum likelihood (ML). Nevertheless, the ML method requires numerical approximations leading to less accurate values. However, estimators by the method of moments (MM) are explicit and their computation is fast. Even though MM method leads to good results, it is not optimal. In order to combine the advantages of the ML (optimality) and MM (efficiency and fast computations), two new mixed methods were proposed in this paper. One of the two methods is direct and the other is iterative, denoted respectively direct mixed method (MMD) and iterative mixed method (MMI). An overall comparison of the four estimation methods (MM, ML, MMD and MMI) was performed using Monte Carlo simulations regarding the three Halphen distributions. Generally, the MMI method can be considered for the three Halphen distributions since it is recommended for a majority of cases encountered in hydrology. The principal idea of the mixed methods MMD and MMI could be generalized for other distributions with complicated density functions.     

Morphology,structure and kinematics of a rainfall controlled slow‐moving Andean landslide,Peru

The large slow‐moving landslide of Maca is located in the upper Colca valley (southern Peru), a region characterized by a well pronounced rainy period, and intense and recurrent sustained seismicity. The landslide, developed in deep lacustrine deposits, has recently accelerated, threatening the Maca village. This work aims at understanding the rupture mechanism and the causes of the recent landslide reactivation/acceleration. We present a multidisciplinary characterization of the Maca landslide that includes: (i) geological and morphological mapping in the field; (ii) remote sensing analysis using an historical aerial photograph of 1955 and the Pléiades satellite images (2013); (iii) global positioning system (GPS) including time‐series of surveys over 13 years, and continuous measurements over 14 months; (iv) a geophysical campaign with deep electrical resistivity tomography profiles acquired across the landslide mass. Our study shows that this 60 Mm³ landslide, which can be classified as a clay/silt compound landslide, moved by 15 m between 2001 and 2014 with a large inter‐annual velocity variation (up to a factor of 500) depending on the rainfall intensity. We suggest that these dramatic changes in velocity are the result of the combination of a threshold mechanism and the short intense rainy season in Peru. This study reveals three main driving factors acting at different timescales: (i) over several decades, the river course has significantly changed, causing the Maca landslide reactivation in the 1980s due to the erosion of its toe; (ii) at the year scale, a minimum amount of rainfall is required to trigger the motion and this amount controls the landslide velocity; (iii) transient changes in slide velocity may occur anytime due to earthquakes. This study particularly highlights the non‐linear behaviour of the motion with rainfall. Copyright © 2016 John Wiley & Sons, Ltd.