藏北羌塘中部日湾茶卡组物源——LA-ICP-MS锆石U-Pb年龄及稀土元素特征

在龙木错—双湖—澜沧江板块缝合带中段的冈玛错—日湾茶卡地区,近东西向展布着一条富含暖水型生物化石的早石炭世地层日湾茶卡组(C1r)。对日湾茶卡组砂岩中的碎屑锆石进行LA-ICP-MS U-Pb定年,分析结果显示存在325~400Ma、400~500Ma、500~600Ma、950~1100Ma、1400~1800Ma和大于1800Ma六个年龄区间;最年轻的碎屑锆石年龄为325 Ma,时代为早石炭世维宪期;碎屑锆石中362 Ma和454Ma的年龄峰值最明显,为龙木错—双湖—澜沧江洋岛弧消减事件和加里东运动的年龄记录,表明碎屑岩的物源区主要来自于扬子大陆周缘。结合古生物化石资料可知,日湾茶卡组属于欧亚大陆扬子型石炭纪沉积地层,为岛弧环境下的一套浅水台型沉积。     

藏北羌塘中部日湾茶卡地区花岗闪长岩LA-ICP-MS锆石U-Pb年龄与地球化学特征

报道了藏北羌塘中部日湾茶卡地区花岗闪长岩体锆石U-Pb年龄和岩石地球化学特征。该花岗闪长岩位于龙木错—双湖—澜沧江板块缝合带西段。岩石样品中的锆石具有较好的晶形,可见典型的岩浆振荡环带结构,具有较高的Th/U值,为典型的岩浆成因锆石。样品锆石LA-ICP-MS技术测得的锆石年龄为211.0Ma±1.8Ma,表明其时代为晚三叠世。全岩地球化学分析表明,该花岗闪长岩具有高Si O2、Al2O3,富碱,低TFe2O3、Ti O2的特征,A/CNK值为0.97~1.04,为准铝质—弱过铝质岩石。稀土元素配分模式显示,配分曲线右倾,伴随较弱的Eu负异常;微量元素蛛网图表现出Nb、Ta、Ti、P亏损和Rb、Th、U、K、Pb富集的特征;样品点在构造环境判别图解上均落入碰撞型花岗岩区。初步分析,其岩浆来源可能为幔源岩浆底侵使古老地壳发生熔融。此碰撞型花岗闪长岩对龙木错—双湖—澜沧江洋碰撞的时限提供了一定的岩石学约束,为龙木错—双湖—澜沧江洋的演化提供了基础地质资料。     

测井曲线特征在贵州省兴达井田煤岩层对比中的应用

贵州兴达井田含煤9-17层,其中K1、K2、K3、K4四层煤较稳定,为主要可采煤层。依据钻孔资料,分析测井曲线形态与煤层顶底板以及上下标志层间的组合关系,对井田的煤岩层进行了对比。该井田K1煤层常分叉为K1上、K1下两个分层,其直接顶板高视电阻率异常,三叠系至K1煤层组间自上而下的缓坡状视电阻率曲线形态与自然伽马幅值相对较高的组合特征可作为二叠系含煤地层与三叠系地层划分依据;K2煤层位于龙潭组顶部,下距长兴组灰岩标志层10m左右,煤层本身高伽马异常;K3、K4煤层及其底板具较高的自然伽马特征。     

Exploring the effects of data quality,data worth,and redundancy of CO2 gas pressure and saturation data on reservoir characterization through PEST inversion

This study examined the impacts of reservoir properties on carbon dioxide (CO₂) migration after subsurface injection and evaluated the possibility of characterizing reservoir properties using CO₂ monitoring data such as spatial–temporal distributions of gas pressure, which can be reasonably monitored in practice. The injection reservoir was assumed to be located 1,400–1,500 m below the ground surface such that CO₂ remained in the supercritical state. The reservoir was assumed to contain layers with alternating conductive and resistive properties, which is analogous to actual geological formations such as the Mount Simon Sandstone unit. The CO₂ injection simulation used a cylindrical grid setting in which the injection well was situated at the center of the domain, which extended out 8,000 m from the injection well. The CO₂ migration was simulated using the latest version of the simulator, subsurface transport over multiple phases (the water–salt–CO₂–energy module), developed by Pacific Northwest National Laboratory. A nonlinear parameter estimation and optimization modeling software package, Parameter ESTimation (PEST), is adopted for automated reservoir parameter estimation. The effects of data quality, data worth, and data redundancy were explored regarding the detectability of reservoir parameters using gas pressure monitoring data, by comparing PEST inversion results using data with different levels of noises, various numbers of monitoring wells and locations, and different data collection spacing and temporal sampling intervals. This study yielded insight into the use of CO₂ monitoring data for reservoir characterization and how to design the monitoring system to optimize data worth and reduce data redundancy. The feasibility of using CO₂ saturation data for improving reservoir characterization was also discussed.     

Assessment of soil salinization based on a low-cost method and its influencing factors in a semi-arid agricultural area,northwest China

An investigation of soil salinization was carried out in the Nanshantaizi area (Northwest China) with WET Sensor. This device can measure such soil parameters as bulk soil electrical conductivity, water content, and the pore water electrical conductivity that are important for soil salinization assessments. A distribution map of soil salinization was produced, and the factors influencing soil salinization and its processes were discussed in detail. The study shows that moderately salinized to salt soils are mainly observed in the alluvial plain, where groundwater level is high and lateral recharge water contains high salinity. Nanshantaizi is covered by slightly salinized soils. The soil salinization distribution estimated by WET Sensor is generally consistent with the actual levels of salinization. Soil salinity in Nanshantaizi is mostly of natural origin and accumulated salts could leach to deeper soils or aquifers by water percolation during irrigation. Groundwater evaporation, groundwater level depth and quality of recharge water are important factors influencing soil salinization in the alluvial plain.     

江汉平原西部浅层孔隙水水文地球化学特征

为了揭示地下水由江汉平原周缘向中心径流过程中的水质演化和复杂的水文地球化学作用,以江汉平原西部地区为例,通过数理统计、水化学、同位素地球化学、离子比值关系等方法,开展了江汉平原西部边缘地带浅层孔隙地下水的水文地球化学特征研究。结果表明: 平原区孔隙水以HCO₃-Ca·Mg型为主,丘岗区(丘陵和岗地)主要是HCO₃-Ca·Mg型,少量为HCO₃·SO₄-Ca·Mg型,还出现了HCO₃·NO₃-Ca·Mg型水,总溶解固体(total dissolved solids,TDS)升高主要是由于碳酸盐岩的溶解; 浅层孔隙水均来源于大气降水,蒸发作用对该地区孔隙水的影响较小; 方解石、白云石和石膏的溶解主导研究区的水文地球化学过程,也是孔隙水中Ca²⁺、Mg²⁺的主要来源,Na⁺和K⁺的主要来源是阳离子交换吸附。     

Changes in the critical erosion velocity for sediment colonized by biofilm

In flowing water the incipient motion of sediment can be affected by the presence of microbial biofilm growth. This article documents a series of flume experiments using non‐uniform sediments, in which sediment entrainment was investigated for cases where the sediment was immersed in deionized water, so that no biofilm developed, and for cases where a bio‐sediment was cultivated by placing the sediment in a mixture of natural water and nutrient solution. Differences in entrainment and the velocity at incipient motion were measured over an eight week period, as biofilm grew. It was found that the incipient motion phenomena were quite distinct between the two kinds of sediment. Sediment with biofilm was more stable and, over time, incipient velocity increased to a threshold level, before declining. Biofilm development is clearly an important control on the stability of sediments, especially in eutrophic water bodies. Two incipient velocity formulas were derived for sliding and rolling conditions. Film water theory was utilized to describe the cohesive force between sediment particles and the adhesive force generated by biofilm was introduced into the formula derivation; the time variation characteristics of biofilm strength and the features of the substrate were also taken into consideration. Such analyses can help to predict sediment transport changes due to biofilm presence in nutrient‐rich water bodies.     

赣南白面石铀矿田成因再认识

赣南白面石铀矿田经上世纪60~80年代勘查,发现和探明了白面石、龙坑、双坑、马荠塘4个铀矿床和黄泥湖铀矿点,成为中国重要的铀资源基地。该矿田产于EW向南岭铀成矿带东段的白面石沉积-火山盆地内。该盆地的基底为印支期白面石花岗岩体;盖层为中侏罗统菖蒲组。盖层的底部为第一层砂岩,其上由基性-酸性双峰式火山岩组合与5层碎屑岩夹层组成。铀矿主要赋存在盖层底部的第一层砂岩中,其次是产在第一层玄武岩与第一层砂岩的接触带,有少量产在基底花岗岩顶部的风化壳中。关于该铀矿田的成因,有砂岩型沉积说、同生沉积后生富集说、成岩成矿热液叠加说、岩浆热液说,等等。为了厘定矿床成因类型,以确立今后的找矿方向,笔者对该矿田的资料进行了重新整理,应用Minesight软件选择典型的白面石铀矿床建立了三维地质模型,并收集了最新的同位素定年和岩石地球化学分析资料。研究表明,白面石铀矿田存在2次成矿（160~156 Ma和99~86 Ma）,其主成矿作用与第一层玄武岩的覆盖,在空间上相伴（铀矿体主要赋存于第一层砂岩及其与玄武岩的接触带）、时间上相近（成矿时间为160~156 Ma,玄武岩成岩时间为173 Ma）、成生上相关（矿化具有明显的中-低温热液蚀变）,为火山热盖成因类型,后期又有大量脉体活动,在岩脉两侧的砂岩层内又有热液型铀矿化叠加,从而形成了火山热盖及热液叠加的复成因矿床。该矿田的成矿条件是：富铀的基底,砂岩的沉积,洼沟的地形,岩浆的热盖,脉岩的入侵。     

哈萨克斯坦萨亚克铜矿田代表性矿区矽卡岩矿物的组成及其意义研究

哈萨克斯坦萨亚克铜矿田产于晚石炭世闪长玢岩、石英闪长玢岩或花岗闪长玢岩与中石炭统灰岩的接触带上,铜矿体呈透镜状、脉状产于矽卡岩中。其成矿期可以划分为4个阶段：石榴子石矽卡岩阶段（Ⅰ）、绿帘石-石榴子石矽卡岩阶段（Ⅱ）、磁铁矿阶段（Ⅲ）和石英-硫化物阶段（Ⅳ）。铜矿化主要发生在石英-硫化物阶段,形成石英、黄铁矿、黄铜矿、磁黄铁矿,呈浸染状或脉状产于不同类型的矽卡岩或块状磁铁矿中。矽卡岩中的石榴子石有3种类型：石榴子石矽卡岩中的钙铁榴石（Grt-a）、交代钙铁榴石的含Al钙铁榴石（Grt-b）和绿帘石-石榴子石矽卡岩中具有环带结构的石榴子石（Grt-c）。从第一类到第三类石榴子石,平均w（Al₂O₃）从<1%逐渐升高至~5%;分子式中平均Fe³⁺原子数从2.15逐渐降低至1.57,显示成矿体系中Al的摩尔浓度逐渐升高、氧逸度逐渐降低。绿帘石-石榴子石矽卡岩中发育少量辉石,属于钙铁辉石-透辉石系列,在辉石分类图中落于普通辉石范围内。矽卡岩的地质特征、矿物组合和矿物化学特征表明,萨亚克矽卡岩是与花岗岩类侵入岩有关的岩浆热液与灰岩通过接触交代反应形成的钙质矽卡岩,随着矽卡岩化和成矿作用的进行,成矿体系的温度和氧逸度逐渐降低、pH值升高,导致磁铁矿和黄铁矿-磁黄铁矿-黄铜矿矿物组合依次发生沉淀。     

云南中甸红牛-红山矽卡岩型铜矿床矿物学特征与成矿作用

红牛-红山矿床位于西南三江成矿带的中甸岛弧,是形成于晚燕山期的矽卡岩型铜矿床。矿区与成矿作用密切相关的石英二长斑岩中角闪石和黑云母斑晶的出现以及较高的含F量(分别为1.49%和2.62%),表明其岩浆为富H2O富挥发分熔体;石英斑晶具有港湾状、浑圆状的溶蚀表面和钾长石细晶外壳,并且显示了典型的骸晶状结构指示了其岩浆经历了快速上升侵位过程和岩浆热液的自交代作用;钻孔中岩浆热液角砾岩和大量石英细脉的出现暗示了岩浆在快速上侵过程中发生了隐爆作用,形成并出溶了含有大量F、Cl等组分的高盐度超临界流体。矽卡岩阶段石榴子石和透辉石具有明显的三个期次:早期细粒的钙铝榴石(And22-57)和角岩中的透辉石(Hd7-27)形成于少量高温气液岩浆流体与围岩的扩散交代作用;中期粗粒的钙铁榴石(And75-98)和次透辉石-钙铁辉石(Hd10-99)形成于大量高温、低氧逸度的岩浆流体与围岩的渗滤交代作用;晚期的钙铝榴石脉(And14-60)和钙铁辉石脉(Hd31-58)形成于低温、高氧逸度的早期交代残留溶液。矽卡岩矿物的生成,使碳酸盐围岩丢失CO2,矿物体积减少,孔隙度和渗透性增加,为成矿提供了条件。退化变质阶段的透闪石、阳起石、绿帘石、绿泥石等交代早期矽卡岩矿物,消耗了成矿流体中大量的CO2和H2O,生成含水矿物以及石英、方解石,使围岩裂隙愈合,孔隙流体压力增加,导致成矿流体沸腾,形成大量黄铜矿、磁黄铁矿、黄铁矿、辉钼矿化。石英-硫化物阶段,由于成矿流体超压→流体沸腾,裂隙生成→减压排泄,裂隙愈合→流体超压的循环,在此过程中围岩经历了多次破裂和裂隙的愈合,直至整个成矿体系完全开放,并与大气水发生混合,使成矿流体中剩余金属最终沉淀。