The Tsesis oil spill impact on the pelagic ecosystem

On 26 October, 1977, the tanker Tsesis grounded in the Swedish archipelago, 65 km south of Stockholm (northern Baltic proper, 59°N, 18°E). The Tsesis carried 17575 t of No. 5 fuel oil. The total spill was estimated as being somewhat more than 1000 t, of which about 600–700 t were recovered, thus leaving about 300 t in the environment. The spill occurred only about 5 km east of the Askö Laboratory, a marine ecological station, which made a relatively fast sampling response possible. The effects on the pelagic ecosystem were studied for 1 month following the spill. Severe effects were recorded only in the immediate vicinity of the wreck where zooplankton biomass declined substantially during the first few days after the spill. Within 5 days the zooplankton biomass was re-established. Oil contamination of zooplankton was recorded for over 3 weeks. It is suggested that an increased phytoplankton biomass and primary production in the impacted area was due to decreased zooplankton grazing rates. Increased bacterial numbers and the oil degradation pattern indicated a rapid bacterial degradation of hydrocarbons in the water column. Sediment traps positioned in the area demonstrated the importance of sedimentation as a pathway for removal of oil from the water column. During the second week after the spill, 0.7% of sedimented material was petroleum hydrocarbons. Using sediment trap data, a total sedimentation of 30–60 t of oil was estimated in the impacted area (42 km²). This corresponds to 10–15% of the unrecovered oil.     

Formation of sapphirine during retrogression of a basic high-pressure granulite,Roan, Western Gneiss Region,Norway

Sapphirine-bearing rocks occur in the northern part of the Western Gneiss Region, Vestranden, central Norway. The sapphirine-bearing rocks are characterized by a high MgO/(MgO + FeO) ratio, high Al₂O₃, MgO and CaO, and low SiO₂ contents. These rocks form layers within larger complexes which originated as layered magmatic rocks. High PT-metamorphism produced a cpx+ky+gt assemblage. The P and T estimates are P = 14.5±2 kbar and T= 870±50° C. During retrogression, the high-P granulite assemblage broke down to form an intermediate-P granulite mineralogy comprising orthopyroxene, spinel, anorthite, andesine, sapphirine and corundum. Textural relationships suggest that sapphirine formed by the reaction: spinel+kyanite sapphirine+corundum, and probably also by a reaction between corundum, spinel and orthopyroxene. All reactions took place within the stability field of kyanite. Textural and micro-chemical relationships indicate equilibrium, conditions during the peak metamorphism, whereas pronounced disequilibrium characterizes the mineral associations formed during the early retrogression at low P _H2O. The investigation shows that parts of the northern segment of the Western Gneiss Region underwent a metamorphic evolution similar to the Caledonian one recorded from eclogite/granulite terrains further south.     

Spodic Material for In Situ Treatment of Arsenic in Ground Water

The leaching of chromium-copper-arsenic salts from old wood preservation sites is a threat to ground water at many places in Sweden. The installation of in situ reactive barriers is an attractive "passive' technique to prevent the further spreading of contaminants. The use of peat as a reactive barrier material has been suggested for heavy metals, but this material was expected to be unsatisfactory for arsenic (As). Therefore, the feasibility of using spodic B horizon material for the retention of arsenic was tested in laboratory column experiments. Contaminated soil was taken from an old preservation site and leached under conditions designed to imitate the field conditions. The arsenic load during the three-month duration of the test corresponded to a load at the field site during three years. The B horizon material proved to be efficient for retention of arsenic, despite the observation that As(III) dominated the As speciation. The As(III) concentration was reduced from 1 to 3 mg dm⁻³ to < 0.02 mg dm⁻³. Pure peat was, as expected, not suited as a reactive barrier for As, and a mixed B horizon/peat reactive barrier also proved unsatisfactory for the removal of As. It is therefore important to separate the B horizon material from any peat that is used to sorb heavy metals. Before applying the B horizon reactive barrier technique in the field, the effect of the naturally occurring variability of the reactive compounds should be tested. The inclusion of oxidizing agents in the barrier could possibly improve the lifetime considerably. Furthermore, the influence of the flow rate should be evaluated since the kinetics of the arsenic adsorption is relatively slow.     

A technique for modeling transport/conversion processes applied to smectite-to-illite conversion in HLW buffers

This paper describes an application of a technique developed for modeling chemical processes in buffer materials that are controlled by a reaction rate and by the transport of one component, which is essential for the process in question to occur. The application described here is the illitization of smectite by fixation of potassium ions in cation exchange positions, and with diffusion of dissolved potassium being the transport process. The technique is verified by comparison with analytical solutions. An overview, based on small models, is given which outlines under what constellations of assumptions the time scale for conversion of the buffer is controlled by reaction rate parameters and under which conditions transport controls this time scale. Examples are given of calculations performed for deposition holes, with potassium being supplied from the surroundings to the upper parts of the highly compacted bentonite buffer. It is concluded that restrictions in nearfield transport capacity have a very significant effect on the conversion time scale. Towards the end of the heating period about 98% of the smectite is found to remain, even for reaction rates and buffer transport conditions that would have left only 10% of the smectite unconverted without nearfield transport restrictions. It is also concluded that the modeling technique can be applied to other, similar, transport/conversion processes.     

Near-Surface Vertical Flux Divergence in the Stable Boundary Layer

Flow in the stable boundary layer is examined at four contrasting sites with greater upwind surface roughness. The surface heterogeneity is disorganized and in some cases weak as commonly occurs. With low wind speeds, the vertical divergence (or convergence) of the momentum and heat fluxes can be large near the surface in what is normally assumed to be the surface layer where such divergence is neglected. For the two most heterogeneous sites, a shallow “new” boundary layer is captured by the tower observations, analogous to an internal boundary layer but more complex. Above the new boundary layer, the magnitudes of the downward fluxes of heat and momentum increase with height in a transition layer, reach a maximum, and then decrease with height in an overlying regional boundary layer. Similar structure is observed at the site with rolling terrain where the shallow new boundary layer at the surface is identified as cold-air drainage generated by the local slope above which the flow undergoes transition to an overlying regional flow. Significant flux divergence near the surface is generated even over an ice floe for low wind speeds and in a shallow Ekman layer that forms during the polar night. For higher wind speeds, the magnitude of the downward fluxes decreases gradually with height at all levels as in a traditional boundary layer.     

Fishing vessel profitability and local economic link obligations—the case of Norwegian trawlers

This paper investigates to what extent limited entry licence local-link obligations hamper economic performance of Norwegian wet fish trawlers. For 1999 average landing prices, gross revenue, net profit and some other economic indicators are compared for three groups of trawlers: (A) vessels that had local-link licence obligations and complied with them; (B) vessels that had such obligations but did not comply; and (C) vessels without local-link obligations. Average operating profit was highest for Group C. Group B vessels’ operating profit was just above that of Group A, despite significantly higher revenues. For all fish species, except redfish, Group C trawlers received higher prices than the other vessels.