Ultraviolet radiation diagnostics of the flare transient layer

The correlation between the pulsed and smooth components of ultraviolet radiation and hard X-rays from solar flares has been interpreted on the basis of the time behavior of the energy flux penetrating from the magnetic field reconnection region to the boundary of the heated region. It has been shown that the time behavior of the primary flare energy flux is easily reconstructed from the time profile of the intensity of hard X-rays, and the time profile of the intensity of ultraviolet radiation represents the release of the flare energy in the flare transient layer. The smooth or pulsed component of the ultraviolet radiation depends on the form of the primary energy release. Information on the dynamics of the heating process and the formation and equalization of the gas pressure in the flare transient layer has been obtained from the observed temperature dependence of the emission measure. The described scheme explains the set of flare phenomena and the correlation between hard X-rays with pulsed ultraviolet bursts.     

Some comments on physical processes at and near the tropopause

The major physical processes at and near the tropopause are evaluated; these processes are radiation, convection and turbulence, advection and vertical convergence. Calculations of instantaneous long wave radiative temperature change for observed and postulated moisture distributions show that radiation usually acts to smooth the temperature profile. Observations and the principle of continuity show that convection is infrequent and unimportant in establishing the tropopause. General principles and numerical integration of the heat conduction equation for special cases show that turbulence will act to smooth the temperature profile unless flux has a certain relationship to hydrostatic stability. Observations, calculations and the principle of continuity show that advection and vertical convergence cannot be universal mechanisms of tropopause formation.

---

Zusammenfassung Die grundlegenden physikalischen Prozesse an und in der Nähe der Tropopause werden bestimmt; diese Prozesse sind Strahlung, Konvektion und Turbulenz, Advektion und Vertikalakonvergenz. Berechnungen von momentanen Temperaturänderungen durch langwellige Strahlung für beobachtete und vorgegebene Feuchtigkeitsverteilungen lassen erkennen, daß die Strahlung gewöhnlich das Temperaturprofil auszugleichen sucht. Beobachtungen und das Kontinuitätsprinzip zeigen, daß Konvektion selten und für die Bildung der Tropopause unwichtig ist. Allgemeine Prinzipien und numerische Integration der Wärmeleitungsgleichung für spezielle Fälle zeigen, daß die Turbulenz das Temperaturprofil auszugleichen sucht, außer wenn der Wärmestrom in spezieller Beziehung zur hydrostatischen Stabilität steht. Beobachtungen, Berechnungen und das Kontinuitätsprinzip führen zu der Feststellung, daß Advektion und vertikale Konvergenz nicht als allgemeine Mechanismen für die Bildung der Tropopause angesehen werden können.

---

Résumé L'auteur évalue les processus physiques fondamentaux de la tropopause et à sa proximité; ces processus sont le rayonnement, la convection et la turbulence, l'advection et la convergence verticale. Le calcul de variations instantanées de la température dûes au rayonnement de grande longueur d'onde, par une distribution observée et supposée de l'humidité, montre qu'en général le rayonnement semble atténuer et égaliser le profil de la température. Les observations et le principe de continuité font admettre que la convection est rare et de peu d'importance pour la formation de la tropopause. Des principes généraux et une intégration numérique de l'équation de transmission de chaleur pour des can spéciaux montrent que la turbulence tend à égaliser le profil de température à moins que le flux de chaleur ne soit en relation spécifique avec la stabilité hydrostatique. Des observations, des calculs et le principe de continuité prouvent que l'advection et la convergence verticale ne peuvent être considérées comme étant des mécanismes généraux pour la formation de la tropopause.

---

---

With 4 Figures

---

The research reported here was supported in part by the Geophysical Research Directorate, A. F. Cambridge Research Center.     

A DEVICE FOR MEASURING GULLY HEADWALL MORPHOLOGY

This paper describes a low-cost device for measuring the three-dimensional morphology of a gully headwall. The device was designed to operate in a gully system with the following characteristics: overhanging banks caused by a thick, dense root mat; retreat of the underlying unconsolidated sediments through small slab failures, leading to a considerable variation in retreat rate at each point on the headwall; and changes in the orientation of the headwall owing to changes in sediment properties and the topographical and hydrological controls of gully growth. The device is used to measure a series of closely spaced vertical profiles of the headwall, and the collected data are combined to draw a contour map showing the distance from the plane of the instrument to the headwall. Comparing maps for sequential times enables retreat rates for the diffferent proportions of the headwall to be quantified.     

MODEL-BASED TRANSFORMATIONS OF COMMON MIDPOINT GATHERS1

A method for transforming Normal Moveout corrected CMP-gathers is proposed. The method is based upon the availability of a model of the CMP-gather. However, the transformation can be performed with any degree of accuracy in the model. Ideally the employed model should be a synthesis of all available a priori information about the particular data set. Mathematically the transformation is performed as follows. The CMP-gather is considered to be a matrix. This matrix is first decomposed into a set of submatrices of the same dimensions. Each submatrix consists of non-zero elements or samples with the same relative amount of noise. By reducing each of these submatrices to a vector (a trace) we get a new set of traces. This set then represents the transformed CMP-gather. The purpose of the transformation is to organize the CMP data in a form which makes it easier both to analyse the noise distribution and to take the necessary steps to improve the signal-to-noise ratio at the stacking stage. In principle the method incorporates the exploitation of multichannel recordings with the use of models. Several examples of transformed gathers and their applications to the improvement of real seismic data are shown.     

Regularities in the formation and evolution of volcanosedimentary complexes in the Early Precambrian

The main objective of this work was to define directions and principal features of the evolution of volcanism and sedimentation in Early Precambrian active volcanic zones. Analysis of reconstructed type sections of intensely metamorphosed and greenstone (sedimentary-volcanic) complexes revealed a general similarity of their structure and universal presence of two principal (contrast and differentiated) volcanic associations that replace each other from the bottom to top (Lazur, 2006). Volcanic complexes are crowned with significantly sedimentary sequences and the manifestation of bimodal (basalt-rhyolite) or acid (dacite-rhyolite) volcanism (Luchitskii et al., 1982). Our work is based on specific rock complexes, for which the primary nature of intensely metamorphosed Early Precambrian rocks has been reconstructed by geological, mineralogical, geochemical, and other methods (Lazur, 1986; Rosen et al., 2005).     

A reinterpretation of the entrainment process in some laboratory experiments

Pollard et al. (1973) proposed a closure hypothesis for the entrainment process in the stress-mixed layer of a stratified fluid. Some laboratory experiments suitable for testing the hypothesis were carried out by Kantha et al. (1977) and by Kato and Phillips (1969). In the early period of each experiment, before side-wall friction becomes important, these experiments support the closure hypothesis, with a critical Froude number close to 1, perhaps F = 1.2 ± 0.2.     

A Linear Programming Approach to Determine the Normative Composition of Sedimentary Rocks

The analysis of modal and normative composition of sedimentary rocks is widely used for studying their sources and tectonic settings. The normative calculation of the mineral composition of rocks in this study is formulated as a linear programming problem and is solved by means of the simplex method. This enables both simultaneous and successive subtraction of a set of basic minerals from a rock sample represented by its chemical composition {SiO₂...LOI}. Such an approach provides a more exact calculation of the contribution of basic minerals in the rock. This mathematical approach is used to study two representative sets of sandstones and fine-grained rocks from a Meso- to Neoproterozoic marginal basin of southeastern Siberia (Uchur–Maya region, Yakutia) and a Pennsylvanian-Lower Permian uplifted continental block in Colorado, USA. The calculated normative mineral compositions of the Siberian sandstones are consistent with the observed modal compositions. These sandstones vary from K- Feldspar rich arkoses at the base of the sequence (the Uchur Group, lower Riphean) to quartz arenites or lithic sandstones and wacke in transgressive successions of the middle-upper Riphean. Arkoses and quartz arenites are dominant in Meso- to Neoproterozoic Siberia. These samples represent craton interior uplifted basement and quartzose, recycled orogen provenance of a stable craton in Rodinia. There are higher but consistent discrepancies between the calculated and observed compositions for the Pennsylvanian to Lower-Permian arkoses and quartz arenites (Sangre de Cristo, Belden, and Maroon Formations). The differences between the predicted and observed mineralogy may be due to uncertainties in the modes in the matrix and cement of the sandstones. This normative program should supplement modal calculations and provide better genetic constructions, especially in case of matrix-rich sandstones.