Evaluation of magmatic processes for the products of the Nevado del Ruiz Volcano, Colombia from geochemical and petrological data

Trace-element concentrations of the eruptive products from the Nevado del Ruiz volcano indicate that at least for the last 1 Ma, the major controlling factor in the evolution of the magma has been a simple fractional crystallization.The Zr/Hf ratios suggest that the source material is mantle-like in origin and whilst subduction-related contamination of the source material has taken place, there is no evidence that assimilation of continental crust has affected the series.No convincing geochemical evidence for magma mixing was found, and data on banded pumices of Pleistocene, Historic and the 1985 eruptions strongly support a crystal fractionation model to explain the compositional variation of their glasses. Therefore, if mixing has taken place it can only be a mixing of layers within a stratified or partially stratified magma chamber.Modeling of fractional crystallization using a stepwise program has been undertaken and least-squares approximations with small residuals are commensurate with analyzed samples. Crystal fractionation models with plagioclase dominating two-pyroxenes and iron oxides give good fits for all calculations. We conclude that simple crystal fractionation is the process most consistent with major- and trace-element variations in the Ruiz series. This closed-system model requires at least 77% crystal fractionation of a basaltic parent to generate the observed compositions of dacites.     

A new treatment of the albedo radiation pressure in the case of a uniform albedo and of a spherical satellite

The purpose of this paper is to present a model for the radiation pressure acceleration of a spherical satellite, due to the radiation reflected by a planet with a uniform albedo. A particular choice of variables allows one to reduce the surface integrals over the lit portion of the planet visible to the satellite to one-dimensional integrals. Exact analytical expressions are found for the integrals corresponding to the case where the spacecraft does not "see" the terminator. The other integrals can be computed either numerically, or analytically in an approximate form. The results are compared with those of Lochry (1966). The model is applied to Magellan, a spacecraft orbiting Venus.     

Stable isotopes and trace elements in modern ostracod shells: implications for reconstructing past environments on the Tibetan Plateau,China

Stable isotopes and trace elements in ostracod shells have been used widely in paleolimnological investigations of past lake hydrochemistry and climate because they provide insights into past water balance and solute evolution of lakes. Regional differences in lake characteristics and species-specific element fractionation, however, do not permit generalization of results from other regions or ostracod species to the southern Tibetan Plateau, in part because most common taxa from the southern Tibetan Plateau are endemic to the area. This study evaluated relations between present-day environmental conditions and the geochemical composition of modern ostracod shells from the southern Tibetan Plateau, to assess the suitability of using shell chemistry to infer hydrological conditions. We studied nine lakes and their catchments, located along a west–east transect in the south-central part of the Tibetan Plateau. Stable oxygen and carbon isotope values and trace element concentrations in recent shells from the four most abundant ostracod species (Leucocytherella sinensis, ?Leucocythere dorsotuberosa, Limnocythere inopinata, Tonnacypris gyirongensis) were measured, together with hydrochemical properties of host waters at the time of sampling. Results revealed significant between-species differences in stable isotope fractionation and trace element incorporation into shell calcite. Stable oxygen and carbon isotope values of ostracod shells were correlated significantly with the stable isotope composition of the respective water body \( \left( {\updelta^{18} {\text{O}}_{{{\text{H}}_{ 2} {\text{O}}}} \,{\text{and }}\updelta^{13} {\text{C}}_{{{\text{H}}_{ 2} {\text{O}}}} } \right) \), reflecting salinity and productivity, respectively. Offsets between δ¹⁸O_shell and δ¹³C_shell and inorganic calcite, the latter representing isotopic equilibrium, suggest shell formation of T. gyirongensis during spring melt. L. sinensis reproduces throughout the monsoon season until September and shows several consecutive generations, and L. inopinata molts to the adult stage after the monsoon season in August/September. The influence of pore water δ¹³C was displayed by L. inopinata, suggesting shell calcification within the sediment. Mg/Ca_shell is primarily influenced by water Mg/Ca ratios and salinity and confirms the use of this shell ratio as a proxy for precipitation-evaporation balance and lake level. In addition, Sr/Ca and Ba/Ca can be used to infer changes in salinity, at least in closed-basin lakes with calcite saturation. Observed effects of water Sr/Ca and salinity on Sr/Ca incorporation are biased by the presence of aragonite precipitation in the lakes, which removes bioavailable Sr from the host water, resulting in low Sr/Ca_shell values. Changes in carbonate mineralogy affect the bioavailability of trace elements, a process that should be considered in paleoclimate reconstructions. Oxygen isotopes and Mg/Ca_shell ratios were unaffected by water temperature. Positive correlations among Fe/Ca, Mn/Ca and U/Ca in ostracod shells, and their negative correlation with δ¹³C, which reflects organic matter decay, show the potential to infer changes in redox conditions that can be used to reconstruct past oxygen supply to bottom waters and thus past water-circulation changes within lakes. The intensity of microbial activity, associated with organic matter decomposition, can be inferred from U/Ca ratios in ostracod shells. These findings highlight the value of fossil ostracod records in lake deposits for inferring paleoenvironmental conditions on the southern Tibetan Plateau.     

Counteracting urban climate change: adaptation measures and their effect on thermal comfort

Cities represent thermal load areas compared with their surrounding environments. Due to climate change, summer heat events will increase. Therefore, mitigation and adaptation are needed. In this study, meteorological measurements in various local climate zones were performed to demonstrate the influence of evaporation surfaces and other factors on thermal comfort, as determined by the physiologically equivalent temperature (PET). Furthermore, a quantification of the thermal effects of several adaptation measures and varying meteorological parameters was made using model simulations (ENVI-met) in an inner-city neighborhood (Oberhausen, Germany). The results show that the most effective adaptation measure was increased wind speed (maximal 15 K PET reduction). Moreover, vegetation areas show greater PET reductions by the combination of shading and evapotranspiration than water surfaces. The creation of park areas with sufficient water supply and tall, isolated, shade-providing trees that allow for adequate ventilation can be recommended for planning.     

Chemical Procedures for Rhenium Extraction from Geological Samples: Optimising the Anion Resin Bead Clean‐up Step

Rhenium–osmium geochronometry for samples with low Re and complex matrices requires improved Re extraction methods. Here, we investigate plausible controls on efficiency and efficacy of Re extraction during our anion resin bead purification. Four different protocols are compared, each isolating a single variable to test. Rhenium concentrations for solutions at each step of each protocol document differences in chemical recovery/yield. The negative‐thermal ionisation mass spectrometry (N‐TIMS) signal intensity serves as a proxy for Re yield and purity. These data document correlations between the N‐TIMS signal intensity and (a) the duration of anion resin bead conditioning prior to loading with Re‐bearing solution, and (b) both duration and strength of nitric acid used during rinsing of the Re‐loaded anion resin bead. The optimal protocol improved Re signal intensity around fourteen times compared with our current Re extraction protocol, an aggregate of 2.4 times improvement in chemical recovery (yield) and 5.8 times improvement in emission efficiency (purity). Repeated N‐TIMS isotopic measurements on our in‐house Re standard solution (1407) verify that our optimal protocol‐3 does not fractionate Re isotopes. The improved anion resin bead method considerably lowers the Re detection limit and allows Re‐Os isotopic analysis of picogram‐level Re hosted in geological samples with complex matrices.     

Syntectonic subaqueous mass flows of the Neoproterozoic Otavi Group,Namibia: where is the evidence of global glaciation?

The thick (>1 km) Neoproterozoic Otavi Group of Namibia accumulated after ca. 760 Ma along >700 km of the faulted margin of the Congo Craton. The margin shows a north to south, downbasin transition from a shallow‐water carbonate shelf (Otavi Platform) to offshore deepwater slope (Outjo Basin). Within the latter, the Abenab and Tsumeb Subgroups contain large volumes of poorly sorted breccias, conglomerates and diamictites composed principally of locally derived carbonate. Diamictite facies were reported in the 1930s as tillites left by an ice sheet (although the absence of striated clasts and other key glacial indicators was viewed as problematic). Later workers rejected a glacial origin concluding that Outjo basin facies were deposited as parts of prograding submarine wedges built by mass flows during active rifting. Recently, the Snowball Earth hypothesis has returned to the earlier glacial interpretation; arguing that these strata represent a record of extraordinary late Neoproterozoic glacial and interglacial climates when global temperatures fluctuated by up to 100°C. Facies analysis of breccias, diamictites, conglomerates and sandstone strata of the Otavi Group identifies them as genetically related, subaqueously deposited sediment gravity flows. They lack diagnostic indicators of any one specific climate in source areas. These facies were all deposited in deepwater at the foot of landslide‐prone scarp blocks where debris flows and turbidity currents moved large volumes of coarse, freshly broken carbonate debris produced by faulting. Breccias, diamictites, conglomerates and sandstones occur in composite fining‐ and thinning‐upward bundles that are directly analogous to those reported from many other faulted margins in the Phanerozoic stratigraphic record. These rocks provide no clear sedimentological signature of a glacial source or catastrophic Snowball Earth‐type temperature fluctuations. Instead, they point to a dominant tectonic control on sedimentation related to faulting along the margin of the Congo Craton.     

Guiding ecological principles for marine spatial planning

The declining health of marine ecosystems around the world is evidence that current piecemeal governance is inadequate to successfully support healthy coastal and ocean ecosystems and sustain human uses of the ocean. One proposed solution to this problem is ecosystem-based marine spatial planning (MSP), which is a process that informs the spatial distribution of activities in the ocean so that existing and emerging uses can be maintained, use conflicts reduced, and ecosystem health and services protected and sustained for future generations. Because a key goal of ecosystem-based MSP is to maintain the delivery of ecosystem services that humans want and need, it must be based on ecological principles that articulate the scientifically recognized attributes of healthy, functioning ecosystems. These principles should be incorporated into a decision-making framework with clearly defined targets for these ecological attributes. This paper identifies ecological principles for MSP based on a synthesis of previously suggested and/or operationalized principles, along with recommendations generated by a group of twenty ecologists and marine scientists with diverse backgrounds and perspectives on MSP. The proposed four main ecological principles to guide MSP—maintaining or restoring: native species diversity, habitat diversity and heterogeneity, key species, and connectivity—and two additional guidelines, the need to account for context and uncertainty, must be explicitly taken into account in the planning process. When applied in concert with social, economic, and governance principles, these ecological principles can inform the designation and siting of ocean uses and the management of activities in the ocean to maintain or restore healthy ecosystems, allow delivery of marine ecosystem services, and ensure sustainable economic and social benefits.     

Shallow site archaeology: Artifact dispersal,stratigraphy, and radiocarbon dating at the Barger Gulch locality B Folsom Site,Middle Park,Colorado

Shallowly buried archaeological sites are particularly susceptible to surface and subsurface disturbance processes. Yet, because cultural deposition often operates on short time scales relative to geologic deposition, vertical artifact distributions can be used to clarify questions of site formation. In particular, patterns in artifact distributions that cannot be explained by occupation histories must be explained by natural processes that have affected sites. Buried only 10–50 cm beneath the ground surface for 10,450 ¹⁴C yr, the Folsom component at Barger Gulch Locality B (Middle Park, Colorado) exhibits many signs of post‐depositional disturbance. Through examination of variation in the vertical distribution of the artifact assemblage, we are able to establish that only a Folsom component is present. Using vertical artifact distributions, stratigraphy, and radiocarbon dating, we are able to reconstruct the series of events that have impacted the site. The Folsom occupation (˜10,450 ¹⁴C yr B.P.) was likely initially buried in a late‐Pleistocene eolian silt loam. Erosion brought the artifacts to rest on a deflation surface at some time prior to 9400 ¹⁴C yr B.P. A mollic epipedon formed in sediments that accumulated between 9400 and 7000 ¹⁴C yr B.P. Some time after 5200 ¹⁴C yr B.P., this soil was partially truncated, and artifacts that had previously dispersed upward created a secondary lag at its upper contact. This surface was buried again and artifact dispersal continued. © 2005 Wiley Periodicals, Inc.     

Mafic magmas from Mount Baker in the northern Cascade arc,Washington: probes into mantle and crustal processes

Five mafic lava flows located on the southern flank of Mount Baker are among the most primitive in the volcanic field. A comprehensive dataset of whole rock and mineral chemistry reveals the diversity of these mafic lavas that come from distinct sources and have been variably affected by ascent through the crust. Disequilibrium textures present in all of the lavas indicate that crustal processes have affected the magmas. Despite this evidence, mantle source characteristics have been retained and three primitive endmember lava types are represented. These include (1) modified low-K tholeiitic basalt (LKOT-like), (2) typical calc-alkaline (CA) lavas, and (3) high-Mg basaltic andesite and andesite (HMBA and HMA). The Type 1 endmember, the basalt of Park Butte (49.3–50.3 wt% SiO₂, Mg# 64–65), has major element chemistry similar to LKOT found elsewhere in the Cascades. Park Butte also has the lowest overall abundances of trace elements (with the exception of the HREE), indicating it is either derived from the most depleted mantle source or has undergone the largest degree of partial melting. The Type 2 endmember is represented by the basalts of Lake Shannon (50.7–52.6 wt% SiO₂, Mg# 58–62) and Sulphur Creek (51.2–54.6 wt% SiO₂, Mg# 56–57). These two lavas are comparable to calc-alkaline rocks found in arcs worldwide and have similar trace element patterns; however, they differ from each other in abundances of REE, indicating variation in degree of partial melting or fractionation. The Type 3 endmember is represented by the HMBA of Tarn Plateau (51.8–54.0 wt% SiO₂, Mg# 68–70) and the HMA of Glacier Creek (58.3–58.7 wt% SiO₂, Mg# 63–64). The strongly depleted HREE nature of these Type 3 units and their decreasing Mg# with increasing SiO₂ suggests fractionation from a high-Mg basaltic parent derived from a source with residual garnet. Another basaltic andesite unit, Cathedral Crag (52.2–52.6 wt% SiO₂, Mg# 55–58), is an Mg-poor differentiate of the Type 3 endmember. The calc-alkaline lavas are least enriched in a subduction component (lowest H₂O, Sr/P_N, and Ba/Nb), the LKOT-like lavas are intermediate (moderate Sr/P_N and Ba/Nb), and the HMBA are most enriched (highest H₂O, Sr/P_N and Ba/Nb). The generation of the LKOT-like and calc-alkaline lavas can be successfully modeled by partial melting of a spinel lherzolite with variability in composition of slab flux and/or mantle source depletion. The HMBA lavas can be successfully modeled by partial melting of a garnet lherzolite with slab flux compositionally similar to the other lava types, or less likely by partial melting of a spinel lherzolite with a distinctly different, HREE-depleted slab flux.     

Shallow and deep reservoirs involved in magma supply of the 1944 eruption of Vesuvius

 During the 1944 eruption of Vesuvius a sudden change occurred in the dynamics of the eruptive events, linked to variations in magma composition. K-phonotephritic magmas were erupted during the effusive phase and the first lava fountain, whereas the emission of strongly porphyritic K-tephrites took place during the more intense fountain. Melt inclusion compositions (major and volatile elements) highlight that the magmas feeding the eruption underwent differentiation at different pressures. The K-tephritic volatile-rich melts (up to 3 wt.% H₂O, 3000 ppm CO₂, and 0.55 wt.% Cl) evolved to reach K-phonotephritic compositions by crystallization of diopside and forsteritic olivine at total fluid pressure higher than 300 MPa. These magmas fed a very shallow reservoir. The low-pressure differentiation of the volatile-poor K-phonotephritic magmas (H₂O<1 wt.%) involved mixing, open-system degassing, and crystallization of leucite, salite, and plagioclase. The eruption was triggered by intrusion of a volatile-rich magma batch that rose from a depth of 11–22 km into the shallow magma chamber. The first phase of the eruption represents the partial emptying of the shallow reservoir, the top of which is within the volcanic edifice. The newly arrived magma mixed with that resident in the shallow reservoir and forced the transition from the effusive to the lava fountain phase of the eruption. Received: 14 September 1998 / Accepted: 10 January 1999