Tectonic deformation and recrystallisation of oligoclase

Naturally deformed and partially recrystallised oligoclase porphyroclasts were studied in a high voltage electron microscope. The oligoclases had a highly deformed outer mantle zone, which contained high densities of dislocations and albite and pericline deformation twins, and less deformed cores containing fewer dislocations and albite twins but no pericline deformation twins. There was little evidence for recovery; apparently the internal strain energy due to deformation was relieved by recrystallisation. Strain free nuclei developed in areas with the highest defect densities. The resultant new grains had a lower anorthite content than their parents. It is suggested that the recrystallisation processes were aided by strain enhanced diffusion.     

Vertical migration ofcentropages typicus (copepoda) in Chesapeake Bay,with some thoughts on migration studies

Centropages typicus was collected at two hour intervals over a diel cycle at a station near the Chesapeake Bay mouth. The species migrated upward at dusk and downward at dawn. Neither light, temperature, salinity, nor density appeared to cue the migration. Attention is drawn to the need for information on the extent and regularity of migration by individual organisms, and how the lack of such information may lead to poor interpretations of migration data.     

On the deformation of quartzite

In view of the apparent difficulty of satisfying the von Mises criterion for general plasticity by dislocation glide alone, the climb mechanism proposed by Nabarro (1967) has been considered as an important contributor to the steady state deformation of quartzites in the earth's crust. The proposed deformation mechanism can provide the necessary strain rates; it is consistent with the observed dislocation structures and leads to a simple explanation of the water weakening phenomenon in terms of the increase in diffusivity of the atom species. In addition, the experimentally observed effects of strain rate and temperature on the opening angle of the characteristic ‘girdle’ fabrics of quartzite are a natural consequence of the model and this relationship could provide analytical procedures for the establishment of crustal deformation conditions.     

Sodium and potassium coprecipitation in aragonite

The coprecipitation of Na and K was experimentally investigated in aragonite. The distribution functions were determined at pH 6.8 and 8.8 over aqueous Na and K concentrations of between 5 × 10^?4and 2.0 M and temperatures of between 25 and 75°C.The mole fractions of Na and K in aragonite are related to the aqueous ratios of Na and Ca by a function of the form

$\text{log}\text{X}{}_{\mathrm{Na}}{}_2\text{CO}{}_3\text{,K}{}_2\text{CO}{}_3\text{= C}{}_0\text{+ C}{}_1\text{log}\text{a}{}^2{}_{\mathrm{Na}}\text{? ,K}{}^{\mathrm{?}}\text{a}{}_{\mathrm{Ca}}{}^{\mathrm{2+}}$

where C₀ and C₁ are constants at a given temperature. This equation was derived by a statistical model assuming a heterogeneous energy distribution for the sites of incorporation. The independence of the coprecipitation process from aqueous anion activities suggests that carbonate is the only anionic species in the solid solution.     

A statistical study of Galactic SNRs using the PMN survey

The Parkes–MIT–NRAO (PMN) radio survey has been used to generate a quasi all-sky study of Galactic Supernova Remnants (SNRs) at a common frequency of 4.85 GHz (λ=6 cm). We present flux densities estimated for the sample of 110 Southern Galactic SNRs (up to δ=−65°) observed with the Parkes 64-m radio telescope and an additional sample of 54 from the Northern PMN (up to δ=+64°) survey undertaken with the Green Bank 43-m (20 SNRs) and 91-m (34 SNRs) radio telescopes. Out of this total sample of 164 selected SNRs (representing 71% of the currently 231 known SNRs in the Green catalogue) we consider 138 to provide reliable estimates of flux density and surface brightness distribution. This sub-sample represents those SNRs which fall within carefully chosen selection criteria which minimises the effects of the known problems in establishing reliable fluxes from the PMN survey data. Our selection criteria are based on a judicious restriction of source angular size and telescope beam together with careful evaluation of fluxes on a case by case basis. Direct comparison of our new fluxes with independent literature values gives excellent overall agreement. This gives confidence in the newly derived PMN fluxes when the selection criteria are respected. We find a sharp drop off in the flux densities for Galactic SNRs beyond 4 Jy and then a fairly flat distribution from 5 to 9 Jy, a slight decline and a further flat distribution from 9 to 20 Jy though the numbers of SNR in each Jy bin are low. We also re-visit the contentious Σ–D (radio surface brightness–SNRs diameter) relation to determine a new power law index for a sub-sample of shell type SNRs which yields β=−2.2±0.6. This new evaluation of the Σ–D relation, applied to the restricted sample, provides new distance estimates and their Galactic scale height distribution. We find a peak in the SNR distribution between 7–11 kpc with most restricted to ±100 pc Galactic scale height.     

Simulations of baryon oscillations

The coupling of photons and baryons by Thomson scattering in the early universe imprints features in both the cosmic microwave background (CMB) and matter power spectra. The former have been used to constrain a host of cosmological parameters, the latter have the potential to strongly constrain the expansion history of the universe and dark energy. Key to this program is the means to localize the primordial features in observations of galaxy spectra which necessarily involve galaxy bias, non-linear evolution and redshift space distortions. We present calculations, based on mock catalogs produced from high-resolution N-body simulations, which show the range of behaviors we might expect of galaxies in the real universe. We investigate physically motivated fitting forms which include the effects of non-linearity, galaxy bias and redshift space distortions and discuss methods for analysis of upcoming data. In agreement with earlier work, we find that a survey of several Gpc³ would constrain the sound horizon at z  1 to about 1%.     

A structural and geophysical approach to the study of fractured aquifers in the Scansano-Magliano in Toscana Ridge, southern Tuscany, Italy

Fresh water availability has recently become a serious concern in the Italian Apennines, as various activities rely on a predictable supply. Along the ridge between Scansano and Magliano in Toscana, in southern Tuscany, the situation is further complicated by contamination of the nearby alluvial aquifers. Aquifers locally consist of thin fractured reservoirs, generally within low-permeability formations, and it can be difficult to plan the exploitation of resources based on conventional techniques. An integrated study based on geological data investigated the link between tectonics and groundwater circulation, to better define the hydrological model. After the regional identification of fault and fracture patterns, a major structure was investigated in detail to accurately map its spatial position and to understand the geometry and properties of the associated aquifer and assess its exploitation potential. The subsurface around the fault zone was clearly imaged using ground probing radar, two-dimensional and three-dimensional resistivity tomography, and three-dimensional shallow seismic surveys. The vertical and horizontal contacts between the different geological units of the Ligurian and Tuscan series were resolved with a high degree of spatial accuracy. Three-dimensional high-resolution geophysical imaging proved to be a very effective means of characterising small-scale fractured reservoirs.     

A suspended-particle rosette multi-sampler for discrete biogeochemical sampling in low-particle-density waters

To enable detailed investigations of early stage hydrothermal plume formation and abiotic and biotic plume processes we developed a new oceanographic tool. The Suspended Particulate Rosette sampling system has been designed to collect geochemical and microbial samples from the rising portion of deep-sea hydrothermal plumes. It can be deployed on a remotely operated vehicle for sampling rising plumes, on a wire-deployed water rosette for spatially discrete sampling of non-buoyant hydrothermal plumes, or on a fixed mooring in a hydrothermal vent field for time series sampling. It has performed successfully during both its first mooring deployment at the East Pacific Rise and its first remotely-operated vehicle deployments along the Mid-Atlantic Ridge. It is currently capable of rapidly filtering 24 discrete large-water-volume samples (30–100 L per sample) for suspended particles during a single deployment (e.g. >90 L per sample at 4–7 L per minute through 1 μm pore diameter polycarbonate filters). The Suspended Particulate Rosette sampler has been designed with a long-term goal of seafloor observatory deployments, where it can be used to collect samples in response to tectonic or other events. It is compatible with in situ optical sensors, such as laser Raman or visible reflectance spectroscopy systems, enabling in situ particle analysis immediately after sample collection and before the particles alter or degrade.