Géomorphologie de Tromelin,océan Indien

Tromelin is a small coral reef island (1 km²) located in the Indian Ocean, approximately 440 km east of Madagascar and 580 km north of La Réunion. Despite the presence of a permanent Météo France weather station on Tromelin since the 1950 s, a detailed geomorhological study of the island has never been undertaken. In this paper, we describe results from the 2008 field season, which enabled us to map and describe seven geomorphological zones on the atoll. (1) Tromelin's bathymetry is characterised by a pronounced submarine slope, which attains depths of 1000 m at only 2.5 km from the island's coastline. This geomorphology is typical of volcanic hotspots. (2) A coral platform borders the emerged crown of the island. This platform is exposed at low tide and has been fashioned in an ancient Pleistocene substratum. The substratum has been eroded by abrasive marine action to its present shape since the stabilisation of relative sea level around 6000 years ago. Erosion of the reef yields most of the biogenic sediment supply to the island. (3) The upper foreshore is characterised by outcrops of beachrock. These formations show a stratfication in slabs and dip gently towards the sea in the same manner as the contemporary clastic sediments. (4) Tromelin's beaches are divided into three sub-units, which reflect the different energy dynamics around the island, in addition to the transfer of sediment from the windward to the leeward side: (i) the southern storm beaches are characterised by coral blocks reworked during episodic high-energy events; they form boulder ramparts. Four perched rampart ridges have been recorded at ∼1 m, ∼3 m, ∼4.5 m and ∼7 m above mean sea level; (ii) transitional beaches are observed between the south and the north, constituting storm blocks and coarse sands and gravels; and (iii) sandy beaches are noted on the northern leeward side, comprising rounded gravels and coarse sands. The northern tip of the island is characterised by a sand spit (∼125 × ∼225 m), whose geometry varies based on the seasonal and meteo-marine contexts. (5) On Tromelin, a number of dune formations are observed. These are best developed in the north of the island due to the south-north translation of clastic sediments by aeolian wind action, and the trapping of sands by the well-developed vegetation. The height of the dunes varies between 10 cm (the southern micro-dunes) to 250 cm in the Northeast of Tromelin. (6) Exceptional waves have deposited storm tracts up to 250 m from the foreshore zone, comprising coarse gravels and coral blocks. The storm tract deposits are most prevalent on the windward side of the island, due not only to the high-energy dynamics, but also to the absence of vegetation cover in this area. (7) The southern depression covers an area of ∼40,000 m². At its lowest point it is only 1.2 m above sea level.     

A visibility-based assessment of tsunami evacuation signs in Seaside,Oregon

Tsunami risk mitigation programs often include iconic evacuation signage to direct locals and visitors to safety during a tsunami event. This paper examines sign placement in Seaside, Oregon, from a visibility perspective. It leverages existing visibility analysis methodologies characterize the visibility of the community’s evacuation signage and reveals patterns in the viewable landscape. Additionally, we develop a topologically 3D approach to visibility analysis using raw LiDAR datasets. This applied work situates a discussion on existing patterns of visibility, how to improve existing signage placement, 2D and 3D representation of landscape, and the importance of visibility analysis. This work aims to stimulate discussion and development of hazard research that incorporates a visibility perspective.     

Neoglacial (<3000 years) till and flutes at Saskatchewan Glacier,Canadian Rocky Mountains,formed by subglacial deformation of a soft bed

Understanding the processes that deposit till below modern glaciers provides fundamental information for interpreting ancient subglacial deposits. A process‐deposit‐landform model is developed for the till bed of Saskatchewan Glacier in the Canadian Rocky Mountains. The glacier is predominantly hard bedded in its upper reaches and flows through a deep valley carved into resistant Palaeozoic carbonates but the ice margin rests on a thick (<6 m) soft bed of silt‐rich deformation till that has been exposed as the glacier retreats from its Little Ice Age limit reached in 1854. In situ tree stumps rooted in a palaeosol under the till are dated between ca 2900 and 2700 yr bp and record initial glacier expansion during the Neoglacial. Sedimentological and stratigraphic observations underscore the importance of subglacial deformation of glaciofluvial outwash deposited in front of the advancing glacier and mixing with glaciolacustrine carbonate‐rich silt to form a soft bed. The exposed till plain has a rolling drumlinoid topography inherited from overridden end moraines and is corrugated by more than 400 longitudinal flute ridges which record deformation of the soft bed and fall into three genetically related types: those developed in propagating incipient cavities in the lee of large subglacial boulders embedded in deformation till, and those lacking any originating boulder and formed by pressing of wet till up into radial crevasses under stagnant ice. A third type consists of U‐shaped flutes akin to barchan dunes; these wrap around large boulders at the downglacier ends of longitudinal scours formed by the bulldozing of boulders by the ice front during brief winter readvances across soft till. Pervasive subglacial deformation during glacier expansion was probably facilitated by large boulders rotating within the soft bed (‘glacioturbation’).     

Relationship among titanium,rare earth elements,U–Pb ages and deformation microstructures in zircon: Implications for Ti-in-zircon thermometry

A zircon grain in an orthopyroxene–garnet–phlogopite–zircon–rutile-bearing xenolith from Udachnaya, Siberia, preserves a pattern of crystallographic misorientation and subgrain microstructure associated with crystal–plastic deformation. The zircon grain records significant variations in titanium (Ti) from 2.6 to 30 ppm that corresponds to a difference in calculated Ti-in-zircon temperatures of over several hundred degrees Celsius. The highest Ti concentration is measured at subgrain centres (30 ppm), and Ti is variably depleted at low-angle boundaries (down to 2.6 ppm). Variations in cathodoluminescence coincide with the deformation microstructure and indicate localised, differential enrichment of rare earth elements (REE) at low-angle boundaries. Variable enrichment of U and Th and systematic increase of Th/U from 1.61 to 3.52 occurs at low-angle boundaries. Individual SHRIMP-derived U–Pb ages from more deformed zones (mean age of 1799 ± 40, n = 22) are systematically younger than subgrain cores (mean age of 1851 ± 65 Ma, n = 7), and indicate that open system behaviour of Ti–Th–U occurred shortly after zircon growth, prior to the accumulation of significant radiogenic Pb. Modelling of trace-element diffusion distances for geologically reasonable thermal histories indicates that the observed variations are ~ 5 orders of magnitude greater than can be accounted for by volume diffusion. The data are best explained by enhanced diffusion of U, Th and Ti along deformation-related fast-diffusion pathways, such as dislocations and low-angle (< 5°) boundaries. These results indicate chemical exchange between zircon and the surrounding matrix and show that Ti-in-zircon thermometry and U–Pb geochronology from deformed zircon may not yield information relating to the conditions and timing of primary crystallisation.     

Alternative water management options to reduce vulnerability for climate change in the Netherlands

Urbanization, land subsidence and sea level rise will increase vulnerability of the urbanized low-lying areas in the western part of the Netherlands. In this article possibilities are explored to reduce vulnerability of these areas by implementing alternative water management options. Two main water management fields are distinguished, water supply and flood control. A four-component vulnerability framework is presented that includes threshold capacity, coping capacity, recovery capacity, and adaptive capacity. By using the vulnerability framework it is shown that current water supply and flood control strategies in the Netherlands focus on increasing threshold capacity by constructing higher and stronger dikes, improved water storage and delivery infrastructure. A complete vulnerability decreasing strategy requires measures that include all four capacities. Flood damage reduction, backup water supply systems and emergency plans are measures that can contribute to increasing coping capacity. Recovery capacity can be increased by multi-source water supply, insurance, or establishing disaster funds. Adaptive capacity can be developed by starting experiments with new modes of water supply and urbanization. Including all four components of the vulnerability framework enables better understanding of water and climate related vulnerability of urban areas and enables developing more complete water management strategies to reduce vulnerability.     

New friends in new places: Network formation during the migration process among Poles in the UK

This paper contributes to on-going work that seeks to understand the dynamic nature of immigrant social network formation. We explore three propositions, derived from the literature, that might be expected to characterise the ways in which migrant associational ties evolve during and immediately after arrival in their destination country. Evidence is drawn from 42 interviews conducted between January and December 2008 with predominantly Polish migrants to the UK (28) as well as domestic service providers (14). In agreement with the existing literature on immigrant social network formation we find that weak associational ties between migrants are locally dense and rapidly formed. More surprisingly, we also find that the Poles in our sample from lower socio-economic groups tended to rely heavily upon weak associational ties while higher socio-economic group Poles tended to rely on associations made through their employing institutions. This illustrates the importance of socio-economic status in framing co-ethnic migrant network formation. This is significant because we also find that weak associational ties are not unambiguously beneficial to lower socio-economic group migrants who tend to (have to be) more compromising about, and therefore more compromised by, the social ‘friendships’ that result.     

Basaltic and Solution Reference Materials for Iron,Copper and Zinc Isotope Measurements

Iron, Cu and Zn stable isotope systems are applied in constraining a variety of geochemical and environmental processes. Secondary reference materials have been developed by the Institute of Geology, Chinese Academy of Geological Sciences (CAGS), in collaboration with other participating laboratories, comprising three solutions (CAGS‐Fe, CAGS‐Cu and CAGS‐Zn) and one basalt (CAGS‐Basalt). These materials exhibit sufficient homogeneity and stability for application in Fe, Cu and Zn isotopic ratio determinations. Reference values were determined by inter‐laboratory analytical comparisons involving up to eight participating laboratories employing MC‐ICP‐MS techniques, based on the unweighted means of submitted results. Isotopic compositions are reported in per mil notation, based on reference materials IRMM‐014 for Fe, NIST SRM 976 for Cu and IRMM‐3702 for Zn. Respective reference values of CAGS‐Fe, CAGS‐Cu and CAGS‐Zn solutions are as follows: δ⁵⁶Fe = 0.83 ± 0.07 and δ⁵⁷Fe = 1.20 ± 0.13, δ⁶⁵Cu = 0.57 ± 0.06, and δ⁶⁶Zn = ?0.79 ± 0.12 and δ⁶⁸Zn = ?1.65 ± 0.24, respectively. Those of CAGS‐Basalt are δ⁵⁶Fe = 0.15 ± 0.07, δ⁵⁷Fe = 0.22 ± 0.10, δ⁶⁵Cu = 0.12 ± 0.08, δ⁶⁶Zn = 0.17 ± 0.13, and δ⁶⁸Zn = 0.34 ± 0.26 (2s).