Distribution of glaciofluvial sediment within and on the surface of a high arctic valley glacier: Marthabreen,Svalbard

Marthabreen is a 7·8 km long valley glacier in SW Spitsbergen. The glacier is partially covered by a layer of angular debris derived from rockfall in its accumulation area, pierced in places by pinnacles and ridges of glaciofluvial sediment. These concentrations of glaciofluvial sediment fall into three categories: (1) debris pinnacles; (2) longitudinal sediment dykes; (3) longitudinal ridge accumulations. Debris pinnacles are slabs of sediment (predominantly sands, gravels and cobbles) elevated to the glacier surface along thrusts. Longitudinal sediment dykes are low (<0·5 m high) ridges of debris melting out of vertical sediment dykes within the body of the glacier. They are composed of a range of facies including sands, granule gravels, pebble gravels and diamiction. These dykes are sub-parallel to the longitudinal foliation on the glacier and form during folding of the stratification. Longitudinal ridge accumulations are higher (>1 m high) ridges of sorted sand and gravels which are not associated with penetrative ice structures. Their occurrence downglacier of sediment dykes and debris pinnacles suggests that they originate as supraglacial or englacial channels or tunnels filled by sediment derived from the dykes or thrusts. The presence of large quantities of glaciofluvial sediment on the surface of Marthabreen does not imply englacial water flow at high levels within the glacier, but is related to ice deformational processes such as thrusting and folding of debris-rich stratification. Copyright © 1999 John Wiley & Sons, Ltd.     

Roughness coefficients and velocity estimation in well-inundated sheet and rilled overland flow without strongly eroding bed forms

Even with the flow of water over a soil surface in which roughness elements are well inundated, and in less erosive situations where erosional bed forms are not pronounced, the magnitude of resistance coefficients in equations such as those of Darcy–Weisbach, Chezy or Manning vary with flow velocity (at least). Using both original laboratory and field data, and data from the literature, the paper examines this question of the apparent variation of resistance coefficients in relation to flow velocity, even in the absence of interaction between hydraulics and resulting erosional bed forms. Resistance equations are first assessed as to their ability to describe overland flow velocity when tested against these data sources. The result is that Manning's equation received stronger support than the Darcy–Weisbach or Chezy equations, though all equations were useful. The second question addressed is how best to estimate velocity of overland flow from measurements of slope and unit discharge, recognizing that the apparent flow velocity variation in resistance coefficients is probably a result of shortcomings in all of the listed resistance equations. A new methodology is illustrated which gives good agreement between estimated and measured flow velocity for both well-inundated sheet and rill flow. Comments are given on the predictive use of this methodology. Copyright © 1999 John Wiley & Sons, Ltd.     

Governance,Gender and the Appropriation of Natural Resources: A Case Study of ‘Left-Behind’ Women’s Collective Action in China

China’s rapid urbanization has created large scale of population migration, resulting in many villages being dominated by “left-behind” women, and weak governance of those collectively owned resources. The situation has required these women to take up the functions of decision-making and governance as a remedial mechanism as well as a new path. Based on a case study in a typical hollowing-out village in central China, this paper explores an example of left-behind women’s collective action to prevent the over-exploitation of community and resources. It finds out that although traditionally excluded from public activities and marginalized, the “left-behind” women were able to mobilize and enhance collective action. When empowered, they are growing fast with endurance and courage, and as capable as anyone of defending the common-pool resources. It suggests that the left-behind women offer a new governance option for those population hollowing out rural areas.     

An improved age framework for late Quaternary silicic eruptions in northern Central America

 Five new stepwise-heating ⁴⁰Ar/³⁹Ar ages and one new high-sensitivity ¹⁴C date of ash-fall and ash-flow deposits from late Quaternary silicic volcanoes in northern Central America document the eruption rates and frequencies of five major rhyodacite and rhyolite calderas (Atitlán, Amatitlán, Ayarza, Coatepeque, and Ilopango) located north of the basalt, andesite, and dacite stratovolcanoes of the Central American volcanic front. These deposits form extensive time-stratigraphic horizons that intercalate regionally, and knowledge of dates and stratigraphy provides a valuable framework for age determinations of more localized volcanic and nonvolcanic events. The new data, especially when integrated with previous stratigraphic and dating work, show that all five calderas erupted several times in the past 200 ka and, despite a lack of historic activity, should be considered as active centers that could produce highly explosive eruptions again. Because of their locations near the highly vulnerable economic hearts of Guatemala and El Salvador, the risks of eruptions from these calderas should be carefully considered along with risks of major earthquakes and volcanic front volcanoes, which are much more frequent but inflict less severe and extensive damage. This investigation also includes some examples of dating efforts that failed to produce reasonable results. Received: 15 May 1998 / Accepted: 18 January 1999     

Fluoride-Selective Electrode as a Tool to Evaluate the Degradation of PFAS in Groundwater: A Bench-Scale Investigation

Fluoride (F⁻) concentration in groundwater can be used as an independent measure of the degradation of per- and polyfluoroalkyl substances (PFAS) at contaminated sites. This study assessed the impact of the groundwater matrix, oxidizing reagents, quenching agent, and sample handling procedures (filtration) on determinations of F⁻. F⁻ was quantified using a fluoride-selective electrode (FSE) using matrix spike recovery (acceptable range 75 to 125%) and electrode slope performance (ideal range −54 to −60 mV). For the unaltered aqueous matrices considered (ultrapure water, ultrapure water with sodium chloride, and simulated groundwater), matrix spike recoveries were greater than 93% and acceptable electrode slopes (−59.5 ± 0.2 mV) were obtained. Matrix spike recoveries and electrode slopes when persulfate or permanganate was added were 87 and 93%, and −58.4 ± 1.3 and −47.3 ± 2.2 mV, respectively. Therefore, quantifying F⁻ in matrices containing permanganate should involve use of either a matrix-matched calibration curve or the method of standard additions due to the low electrode slope. The addition of ascorbic acid as a quenching agent resulted in a decrease in matrix spike recoveries to <74% and suggests alternate quenching procedures should be used if an FSE is employed to measure F⁻. Removal of sediments by filtration prior to the addition of the fluoride spike led to improved matrix spike recoveries (>96%), which were otherwise underestimated using the FSE in the presence of sediments. While the FSE may be a quick and portable tool, its significant limitations need to be fully understood before it can be used to quantify the production of F⁻ resulting from the potential degradation of PFAS at field sites.     

Scenario Evaluator for Electrical Resistivity Survey Pre‐modeling Tool

Geophysical tools have much to offer users in environmental, water resource, and geotechnical fields; however, techniques such as electrical resistivity imaging (ERI) are often oversold and/or overinterpreted due to a lack of understanding of the limitations of the techniques, such as the appropriate depth intervals or resolution of the methods. The relationship between ERI data and resistivity is nonlinear; therefore, these limitations depend on site conditions and survey design and are best assessed through forward and inverse modeling exercises prior to field investigations. In this approach, proposed field surveys are first numerically simulated given the expected electrical properties of the site, and the resulting hypothetical data are then analyzed using inverse models. Performing ERI forward/inverse modeling, however, requires substantial expertise and can take many hours to implement. We present a new spreadsheet‐based tool, the Scenario Evaluator for Electrical Resistivity (SEER), which features a graphical user interface that allows users to manipulate a resistivity model and instantly view how that model would likely be interpreted by an ERI survey. The SEER tool is intended for use by those who wish to determine the value of including ERI to achieve project goals, and is designed to have broad utility in industry, teaching, and research.     

Tuned liquid dampers for controlling earthquake response of structures

Numerical simulations of a single‐degree‐of‐freedom (SDOF) structure, rigidly supporting a tuned liquid damper (TLD) and subjected to both real and artificially generated earthquake ground motions, show that a properly designed TLD can significantly reduce the structure's response to these motions. The TLD is a rigid, rectangular tank with shallow water in it. Its fundamental linear sloshing frequency is tuned to the structure's natural frequency. The TLD is more effective in reducing structural response as the ground excitation level increases. This is because it then dissipates more energy due to sloshing and wave breaking. A larger water‐depth to tank‐length ratio than previous studies suggested, which still falls within the constraint of shallow water theory, is shown to be more suitable for excitation levels expected in strong earthquake motions. A larger water‐mass to structure‐mass ratio is shown to be required for a TLD to remain equally effective as structural damping increases. Furthermore, the reduction in response is seen to be fairly insensitive to the bandwidth of the ground motion but is dependent on the structure's natural frequency relative to the significant ground frequencies. Finally, a practical approach is suggested for the design of a TLD to control earthquake response. Copyright © 2000 John Wiley & Sons, Ltd.     

Late Devensian ice sheet characteristics: a palaeohydraulic approach

Glacial meltwater channels are incised into bedrock and diamicton along much of the length of the Mid-Cheshire Ridge. Detailed mapping of one such system near the town of Helsby reveals a dendritic channel network developed in the opposite direction to the regional ice flow during the last (Late Devensian) glaciation. The channels formed subglacially, under atmospheric and not hydrostatic pressure, presumably as the ice sheet downwasted during deglaciation. Morphological and palaeohydraulic evidence suggests that not all of the network was necessarily active contemporaneously. Former water levels in the channels can be estimated due to the presence of bar surfaces, giving a calculated palaeodischarge of at least 111 m³ s⁻¹. The ablation rates required to account for this large discharge are an order of magnitude greater than those obtained from theoretical calculations and those observed in modern glacial environments. This implies that some form of high-magnitude discharge, such as a seasonal flood event, must have taken place in this area during deglaciation. This picture of the Late Devensian ice sheet suggests that during recession the ice sheet was static, crevassed and relatively thin (<50 m). This study also shows that there is no simple relationship between meltwater channel direction and ice dynamics, and that care is required when using the former to make inferences about the latter. Copyright © 1998 John Wiley & Sons, Ltd.     

Formation Flying for a Fresnel Lens Observatory Mission

The employment of a large area Phase Fresnel Lens (PFL) in a gamma-ray telescope offers the potential to image astrophysical phenomena with micro-arcsecond (μ^′′) angular resolution [1]. In order to assess the feasibility of this concept, two detailed studies have been conducted of formation flying missions in which a Fresnel lens capable of focussing gamma-rays and the associated detector are carried on two spacecraft separated by up to 10⁶ km. These studies were performed at the NASA Goddard Space Flight Center Integrated Mission Design Center (IMDC) which developed spacecraft, orbital dynamics, and mission profiles. The results of the studies indicated that the missions are challenging but could be accomplished with technologies available currently or in the near term. The findings of the original studies have been updated taking account of recent advances in ion thruster propulsion technology.