Environmental Factors Contributing to the Development and Demise of a Toxic Dinoflagellate (<Emphasis Type="Italic">Karlodinium veneficum</Emphasis>) Bloom in a Shallow,Eutrophic, Lagoonal Estuary

A dense bloom of the ichthyotoxic dinoflagellate Karlodinium veneficum was discovered in the Neuse River Estuary, North Carolina, on 19 October 2006 and was associated with four subsequent fish kills. Microscopic, photopigment, DNA, and toxicological techniques confirmed bloom identity and toxicity. High-resolution spatio-temporal data from ship-board and fixed automated sampling stations provided a unique opportunity to investigate the environmental conditions that initiated, maintained, and terminated the K. veneficum bloom. Bloom initiation and growth were favored by high nutrient availability and reduced dispersal during the period of declining riverine discharge after Tropical Storm Ernesto. K. veneficum out-competed other co-occurring dinoflagellates, perhaps because of the production of karlotoxins that are known to act as grazing deterrents and to facilitate mixotrophic feeding. Once the bloom was established, small-scale hydrodynamic processes, coupled with vertical migration, concentrated cells along a frontal convergence to high densities (>200,000 cells per milliliter). By 26 October 2006, wind mixing and possible nutrient stress disrupted the bloom. Release of cell-bound toxins during the bloom collapse likely accounted for the associated fish kill events where fish were reported as exhibiting typical symptoms of karlotoxin poisoning. The dynamics of this bloom underscore the tight control of harmful algal blooms by meteorological forcing, hydrology, and sediment nutrient input in this shallow lagoonal estuary.     

Structural similarity and variety at the tips in a wide range of strike–slip faults: a review

Strike–slip faults are often accompanied by a variety of structures, particularly at their tips. The zones of additional fracturing are classified as tip‐damage zones. These zones can be subdivided into several different damage patterns based on the nature and orientation of faults and fractures developed. Damage zones at the ends of small strike–slip faults (mode II tips) develop wing cracks, horsetail splays, antithetic faults, synthetic branch faults and solution surfaces. Similar tip‐damage patterns are also commonly observed at larger (regional) scales, but with a dominance of faulting over tensile cracks and solution surfaces. Wing cracks and horsetail splays developed at small‐scale faults are replaced by normal faults in large‐scale faults. Antithetic faults and synthetic branch faults are observed at small and large scales. Thrust faults are developed at large scales, in a similar pattern to solution surfaces at a small scale. All these structures may show slightly different angular relationships to the master fault at small and large scale, but develop in response similar stress distribution and mechanics around the fault. Thus, mode II tip‐damage zones show similar patterns over a wide range of fault scales.     

Time‐scale analysis in unsaturated porous media under external wave loads

Extreme waves caused by tsunamis and storm surges can lead to soil failures in the near‐shore region, which may have severe impact on coastal environments and communities. Multiphase flows in deformable porous media involve several coupled processes and multiple time scales, which are challenging for numerical simulations. The objective of this study is to investigate the roles of the various processes and their interactions in multiphase flows in unsaturated soils under external wave loading, via theoretical time‐scale analysis and numerical simulations. A coupled geomechanics–multiphase flow model based on conservation laws is used. Theoretical analysis based on coupled and decoupled models demonstrates that transient and steady‐state responses are governed by pore pressure diffusion and saturation front propagation, respectively, and that the two processes are essentially decoupled. Numerical simulations suggest that the compressibility of the pore fluids and the deformation of the soil skeleton are important when the transient responses of the media are of concern, while the steady‐state responses are not sensitive to these factors. The responses obtained from the fully coupled numerical simulations are explained by a simplified time‐scale analysis based on coupled and decoupled models. Copyright © 2010 John Wiley & Sons, Ltd.     

Kinetics of Cd sorption, desorption and fixation by calcite: A long-term radiotracer study

Time-dependent sorption and desorption of Cd on calcite was studied over 210 days utilizing ¹⁰⁹Cd as a tracer to distinguish between ‘labile’ and ‘non-labile’ forms of sorbed Cd. Stabilizing the calcite suspensions for 12 months under atmospheric P_CO2 and controlled temperature was necessary to reliably follow Cd dynamics following initial sorption. Results revealed time-dependant Cd sorption and marked desorption hysteresis by calcite under environmentally relevant conditions. Data obtained were fitted to a first-order kinetic model and a concentric shell diffusion model. Both models described the progressive transfer of Cd²⁺ to a less reactive form within calcite and subsequent desorption of Cd subject to different initial contact times. The kinetic model provided a better fit to the combined sorption and desorption data (R² = 0.992). It differentiates between two ‘pools’ of sorbed Cd²⁺ on calcite, ‘labile’ and ‘non-labile’, in which labile sorbed Cd is in immediate equilibrium with the free Cd²⁺ ion activity in solution whereas non-labile Cd is kinetically restricted. For the diffusion model (R² = 0.959), the rate constants describing Cd dynamics in calcite produced a half-life for Cd desorption of ∼175 d, for release to a ‘zero-sink’ solution. Results from this study allow comment on the likely mechanisms occurring at the calcite surface following long-term Cd sorption.     

Mineralogical and geochemical characterization of precipitates on stream receiving acid mine water, Korea

Seasonal variations of water chemistry occurred in acid mine drainage receiving mine and leachate water. Sulfate and metal concentrations were low in winter but high in spring and summer. Mine waters were highly acidic (up to pH 3.4) in nature with high concentrations of manganese, copper and zinc but high electrical conductivity and sulfate in leachate. The blue and brownish yellow precipitates were formed under different chemical environments of acid mine drainage. Brownish yellow (Munsell color 7.5YR 8/12), blue (Munsell color 2.5B 9/7) and light blue (Munsell color 2.5B 9/3) precipitates deposited on the stream bottom receiving acid mine water. The brownish yellow precipitates formed in the acid mine water, whereas the blue and light blue precipitates formed in the leachate water. The brownish yellow precipitates consisted mainly of ferrihydrite, whereas the blue and light blue precipitates consisted of glaucocerinite and/or woodwardite.     

Distributed deformation around the eastern tip of the Kunlun fault

Whether active strain within the Indo-Asian collision zone is primarily localized along major strike-slip fault systems or is distributed throughout the intervening crust between faults remains uncertain. Despite refined estimates of slip rates along many of the major fault zones, relatively little is known about how displacement along these structures is accommodated at fault terminations. Here, we show that a systematic decrease in left-lateral slip rates along the eastern ~200 km of the Kunlun fault, from >10 mm/year to <1 mm/year, is coincident with high topography in the Anyemaqen Shan and with a broad zone of distributed shear and clockwise vorticity within the Tibetan Plateau. Geomorphic analysis of river longitudinal profiles, coupled with inventories of cosmogenic radionuclides in fluvial sediment, reveal correlated variations in fluvial relief and erosion rate across the Anyemaqen Shan that reflect ongoing differential rock uplift across the range. Our results imply that the termination of the Kunlun fault system is accommodated by a combination of distributed crustal thickening and by clockwise rotation of the eastern fault segments.     

Improved algorithms for generalized finite element simulations of three-dimensional hydraulic fracture propagation

This paper reports improvements to algorithms for the simulation of 3-D hydraulic fracturing with the Generalized Finite Element Method (GFEM). Three optimizations are presented and analyzed. First, an improved initial guess based on solving a 3-D elastic problem with the pressure from the previous step is shown to decrease the number of Newton iterations and increase robustness. Second, an improved methodology to find the time step that leads to fracture propagation is proposed and shown to decrease significantly the number of iterations. Third, reduced computational cost is observed by properly recycling the linear part of the coupled stiffness matrix. Two representative examples are used to analyze these improvements. Additionally, a methodology to include the leak-off term is presented and verified against asymptotic analytical solutions. Conservation of mass is shown to be well satisfied in all examples.     

Significance of river–aquifer interactions for reach-scale thermal patterns and trout growth potential in the Motueka River, New Zealand

To assess whether reaches of the Motueka River (New Zealand) that gain water from groundwater were likely to represent significant cold-water refugia for brown trout during periods of high water temperatures, water temperature was monitored for more than 18 months in two gaining reaches of the Motueka River and three reaches that were predicted to be losing water to groundwater. These data were used to predict brown trout (Salmo trutta) growth in gaining and losing reaches. Groundwater inputs had a small effect on water temperature at the reach-scale and modelling suggests that the differences observed were unlikely to result in appreciable differences in trout growth. Several coldwater patches were identified within the study reach that were up to 3.5°C cooler than the mainstem, but these were generally shallow and were unlikely to provide refuge for adult trout. The exception was Hinetai Spring, which had a mean water temperature of close to 16°C during the period January–March, when temperatures in the mainstem regularly exceeded 19°C. Trout were observed within the cold-water plume at the mouth of Hinetai Stream, which would allow them to thermoregulate when mainstem temperatures are unfavourable while still being able to capitalise on food resources available in the mainstem.     

Does continental crust transform during eclogite facies metamorphism?

Eclogites within exhumed continental collision zones indicate regional burial to depths of at least 60 km, and often more than 100 km in the coesite‐stable, ultra‐high pressure (UHP) eclogite facies. Garnet, omphacitic pyroxene, high‐Si mica, kyanite ± coesite should grow at the expense of low‐P minerals in most felsic compositions, if equilibrium obtained at these conditions. The quartzofeldspathic rocks that comprise the bulk of eclogite facies terranes, however, contain mainly amphibolite facies, plagioclase‐bearing assemblages. To what extent these lower‐P minerals persisted metastably during (U)HP metamorphism, or whether they grew afterwards, reflects closely upon crustal parameters such as density, strength and seismic character. The Nordfjord area in western Norway offers a detailed view into a large crustal section that was subducted into the eclogite facies. The degree of transformation in typical pelite, paragneiss, granitic and granodioritic gneiss was assessed by modelling the equilibrium assemblage, comparing it with existing parageneses in these rocks and using U/Th–Pb zircon geochronology from laser ablation ICPMS to establish the history of mineral growth. U–Pb dates define a period of zircon recrystallization and new growth accompanying burial and metamorphism lasting from 430 to 400 Ma. Eclogite facies mafic rock (~2 vol.% of crust) is the most transformed composition and records the ambient peak conditions. Rare garnet‐bearing pelitic rocks (<10 vol.% of crust) preserve a mostly prograde mineral evolution to near‐peak conditions; REE concentrations in zircon indicate that garnet was present after 425 Ma and feldspar broke down after 410 Ma. Felsic gneiss – by far the most abundant rock type – is dominated by quartz + biotite + feldspar, but minor zoisite/epidote, phengitic white mica, garnet and rutile point to a prograde HP overprint. Relict textures indicate that much of the microstructural framework of plagioclase, K‐feldspar, and perhaps biotite, persisted through at least 25 Ma of burial, and ultimately UHP metamorphism. The signature reaction of the eclogite facies in felsic rocks – jadeite/omphacite growth from plagioclase – cannot be deduced from the presence of pyroxene or its breakdown products. We conclude that prograde dehydration in orthogneiss leads to fluid absent conditions, impeding equilibration beyond ~high‐P amphibolite facies.