The integrated optical spectrum of the Crab nebula and evidence for its fading synchrotron continuum

A flux-calibrated optical spectrum integrated over the entire Crab nebula was obtained by making drift scans with a long-slit spectrograph. Compared to observations obtained over the past 40 years, these new data confirm an earlier controversial result that the [O iii ]  λλ4959, 5007  equivalent width is increasing with time, although the rate of ∼0.9 per cent yr⁻¹ is somewhat slower than that measured previously. Additionally, the Hβ equivalent width is increasing at a comparable rate, but the measured fluxes of both Hβ and [O  iii ] have changed less than their respective equivalent widths. The different rates of change in the measured fluxes and equivalent widths of these lines suggest that the optical synchrotron continuum from the Crab nebula is indeed fading rapidly. The apparent decline is consistent with a rate around  −0.5 (±0.2)  per cent yr⁻¹ at wavelengths near 5000  Å inferred independently from measurements of the optical continuum flux during the same time period.     

A spectroscopic study of the microorganism model of interstellar grains

The microorganism model of interstellar grains is investigated by spectroscopy from the infrared (IR), visible to the ultraviolet (UV) wave regions.E. coli, yeast and spores ofBacillus subtilis exhibit absorption bands at =3.1 and 9.7 m; they also exhibit several absorptions at 68 m which are in agreement with the observed IS extinction curves.To obtain the extinction curves in the visible and UV regions, dry films of microorganism are prepared on a MgF₂ plate or synthesized quartz plate and their spectra measured. In the wavelength region 190400 nm, conventional spectrophotometers are adopted for the measurement. The extinction curve of the film ofE. coli is similar to the observed IS curve.For the wave-range 100<<400 nm, a vacuum UV spectrometer is adopted to avoid absorptions due to O₂ in the atmosphere. The extinction spectra by this method are in agreement with the result obtained by the conventional method where comparison is possible. The extinction curves ofE. coli and yeast are such that they incrase towards the short wavelength and exhibit a peak at -190 nm, which is different from the well-known IS peak at =220 nm. It remains to be seen whether interstellar low temperatures (1040 K) can shift the peak position in the extinction curve of biochemical materials.     

Kinetics of Cd sorption, desorption and fixation by calcite: A long-term radiotracer study

Time-dependent sorption and desorption of Cd on calcite was studied over 210 days utilizing ¹⁰⁹Cd as a tracer to distinguish between ‘labile’ and ‘non-labile’ forms of sorbed Cd. Stabilizing the calcite suspensions for 12 months under atmospheric P_CO2 and controlled temperature was necessary to reliably follow Cd dynamics following initial sorption. Results revealed time-dependant Cd sorption and marked desorption hysteresis by calcite under environmentally relevant conditions. Data obtained were fitted to a first-order kinetic model and a concentric shell diffusion model. Both models described the progressive transfer of Cd²⁺ to a less reactive form within calcite and subsequent desorption of Cd subject to different initial contact times. The kinetic model provided a better fit to the combined sorption and desorption data (R² = 0.992). It differentiates between two ‘pools’ of sorbed Cd²⁺ on calcite, ‘labile’ and ‘non-labile’, in which labile sorbed Cd is in immediate equilibrium with the free Cd²⁺ ion activity in solution whereas non-labile Cd is kinetically restricted. For the diffusion model (R² = 0.959), the rate constants describing Cd dynamics in calcite produced a half-life for Cd desorption of ∼175 d, for release to a ‘zero-sink’ solution. Results from this study allow comment on the likely mechanisms occurring at the calcite surface following long-term Cd sorption.     

Sulfide-driven arsenic mobilization from arsenopyrite and black shale pyrite

We examined the hypothesis that sulfide drives arsenic mobilization from pyritic black shale by a sulfide-arsenide exchange and oxidation reaction in which sulfide replaces arsenic in arsenopyrite forming pyrite, and arsenide (As−1) is concurrently oxidized to soluble arsenite (As+3). This hypothesis was tested in a series of sulfide-arsenide exchange experiments with arsenopyrite (FeAsS), homogenized black shale from the Newark Basin (Lockatong formation), and pyrite isolated from Newark Basin black shale incubated under oxic (21% O₂), hypoxic (2% O₂, 98% N₂), and anoxic (5% H₂, 95% N₂) conditions. The oxidation state of arsenic in Newark Basin black shale pyrite was determined using X-ray absorption-near edge structure spectroscopy (XANES). Incubation results show that sulfide (1 mM initial concentration) increases arsenic mobilization to the dissolved phase from all three solids under oxic and hypoxic, but not anoxic conditions. Indeed under oxic and hypoxic conditions, the presence of sulfide resulted in the mobilization in 48 h of 13-16 times more arsenic from arsenopyrite and 6-11 times more arsenic from isolated black shale pyrite than in sulfide-free controls. XANES results show that arsenic in Newark Basin black shale pyrite has the same oxidation state as that in FeAsS (−1) and thus extend the sulfide-arsenide exchange mechanism of arsenic mobilization to sedimentary rock, black shale pyrite. Biologically active incubations of whole black shale and its resident microorganisms under sulfate reducing conditions resulted in sevenfold higher mobilization of soluble arsenic than sterile controls. Taken together, our results indicate that sulfide-driven arsenic mobilization would be most important under conditions of redox disequilibrium, such as when sulfate-reducing bacteria release sulfide into oxic groundwater, and that microbial sulfide production is expected to enhance arsenic mobilization in sedimentary rock aquifers with major pyrite-bearing, black shale formations.     

Cloning of cytochrome P450 1A (CYP1A) genes from the hermaphrodite fish Rivulus marmoratus and the Japanese medaka Oryzias latipes

To use two small fish Rivulus marmoratus (Cyprinodontiformes, Rivulidae) and the Japanese medaka Oryzias latipes (Belloniformes) as testing models in molecular ecotoxicology, we have cloned the cytochrome P450 1A (CYP1A) gene after screening of both genomic DNA libraries, and sequenced 11,863 and 7,243 bp including all the exons and introns with promoter regions, respectively. The Rivulus and the medaka CYP1A gene consisted of seven exons (including non-coding exons) with high homology to mammals. In the promoter region, Rivulus CYP1A gene has seven xenobiotic response elements (XREs) and two metal response elements (MREs), while the Japanese medaka CYP1A gene has six XREs and four MREs. Interestingly, medaka CYP1A gene has a number of MREs at the promoter, which may affect its response on metal exposure. We describe here the gene structure of both fish CYP1A genes.     

On the recovery of surface wave by pressure transfer function

Except the commonly selected pressure transfer function derived from the linear wave theory, a previous study on the pressure transfer function for recovering surface wave from underwater pressure transducer suggested that the pressure transfer function is a function of frequency parameter only. With careful analysis, this study showed that the pressure transfer function should include a transducer submergence parameter as that given by the linear theory. It was found that the previously suggested empirical formula should be restricted to measurements with the pressure transducer close to the surface; otherwise overestimation of wave height would result. Field measurements were carried out with an acoustic wave gauge and a synchronized pressure transducer located at various depths with submergence parameter close to 1 (near the sea floor). It was shown that the previous one-parameter empirical formula might overestimate the significant wave height by more than 30%. This study found that with deep-water wave bursts excluded, the transfer function based on the linear wave theory provided a fairly good estimation on the significant wave heights, with an average deviation of 3.6%.     

Consumption of bacteria by larvae of a deep-sea polychaete

We investigated whether trochophore larvae of the polychaete Hesiocaeca methanicola, which lives on exposed ice‐like methane hydrates between 500 and 600 m, could consume near‐bottom picoplankton. In laboratory trials larvae significantly reduced the growth rates of all types of picoplankton, including heterotrophic bacteria, Prochlorococcus sp., Synechococcus‐type cyanobacteria and phototrophic eucaryotes <3 μm. Our findings suggest that these types of plankton may be important food sources for deep‐sea planktotrophic larvae.     

Mapping sediment acoustic impedance using remote sensing acoustic techniques in a shallow-water carbonate environment

 Real-time trackline plots of surficial sediment acoustic impedance delineate several sedimentary facies off Garden Key in the Dry Tortugas. The sea floor within a 6×6 km surveyed area consists of carbonate muds (silts), sands and shell, rock, and live corals. The 4-kHz acoustic data supports this finding by providing a pictographic representation of the distribution and structure of several sediment facies types. Plotting the gridded acoustic data with commercial mapping software (Surfer) provides a three-dimensional (3D) perspective of the bottom topography with a color contour map of surficial sediment impedance (upper 0.4 m) draped over the 3D surface.