Passive seismic response controlled high-rise building with high damping device

This paper describes a feasibility study on a high-damping device (HiDAM) installed in a building structure by way of a bracing mechanism. A seismic response analysis with respect to a high-rise building approximately 100 m high is reported. Proper adjustment of the damping coefficient of the HiDAM (oil damper) provided an over all damping factor of about 10–20 per cent to the building structure, and reductions in the response, deformation and shear forces were verified analytically. This paper reports also the performance confirmation tests conducted on a model device of the HiDAM which satisfied the specifications determined from the analytical results. The test results demonstrate the feasibility of the HiDAM and the possibility of utilizing it in high-rise buildings.     

Mode of eruption of Miyake-jima volcano in historic times

Miyake-jima, an island volcano, resting on the Izu-Mariana arc is a basaltic stratovolcano dotted with many parasitic cones and craters. Literatures tell us thirteen eruptions which took place in A.D. 1085, 1154, 1469, 1535, 1595, 1643, 1712–1714, 1763–1769, 1811, 1835, 1874, 1940 and 1962. The last two eruptions were studied in detail by using modern scientific techniques after the surface activities had almost died down. Of the thirteen eruptions, the earlier five are only described as «eruption» and no detailed accounts are written in a document. The eruptions in and after 1643 all occurred from parasitic craters or fissure vents and are classified into the following two types:

1. 1)
   Eruption from a center or centers on or around a parasitic knob on the southwestern flank of the main stratovolcano. Examples are eruptions of 1643, 1712–1714, 1763–1769 and 1835.     

Oxygen isotope cosmothermometer revisited

A previously published estimate of the oxygen isotopic composition of the gas of the early solar nebula must be revised in light of the discovery of non-chemical isotope effects in carbonaceous chondrites. The solids which accreted to form the Earth, Moon and ordinary chondrites probably did not equilibrate isotopically with the gas below 1000 K.     

Distribution of <Emphasis Type="Italic">Nemopilema nomurai</Emphasis> in the southwestern Sea of Japan related to meandering of the Tsushima Warm Current

We investigated the horizontal distribution of Nemopilema nomurai medusae using a midwater trawl in the southwestern Sea of Japan from September to October of each year from 2006 to 2012. Numerous medusae of this species found in 2006, 2007, and 2009 were mainly distributed far (>40 km) from the mainland of Japan in the western part of the survey area, but were distributed in the stations closest (<25 km) to the mainland in the eastern part, particularly in 2006 and 2009. These distribution patterns were associated with the path of the second branch of the Tsushima Warm Current (TWC) that flows offshore to the west of Oki Islands and usually approaches the mainland of Japan to the east of Oki Islands. Differences in jellyfish distribution across the survey periods were related to the distribution of the second branch being associated with types, position and intensity of eddies in the eastern part of the survey area. Hence, the formations of eddies and consequent variation in the path of the TWC would be responsible for transporting medusae from offshore to near the mainland to the east of Oki Islands. Individuals with large bells accumulated in the northwestern part of the survey area, where a cyclonic eddy was present downstream of the third branch of the TWC. This variation in bell size distribution may be ascribed to differences in the physical and/or biological factors among the three branches of the TWC.     

Synthesis of highly dense and fine-grained aggregates of mantle composites by vacuum sintering of nano-sized mineral powders

Synthesized mineral powders with particle size of <100 nm are vacuum sintered to obtain highly dense and fine-grained polycrystalline mantle composites: single phase aggregates of forsterite (iron-free), olivine (iron containing), enstatite and diopside; two-phase composites of forsterite + spinel and forsterite + periclase; and, three-phase composites of forsterite + enstatite + diopside. Nano-sized powders of colloidal SiO₂ and highly dispersed Mg(OH)₂ with particle size of ≤50 nm are used as chemical sources for MgO and SiO₂, which are common components for all of the aggregates. These powders are mixed with powders of CaCO₃, MgAl₂O_4, and Fe(CO₂CH₃)₂ to introduce mineral phases of diopside, spinel, and olivine to the aggregates, respectively. To synthesize highly dense composites through pressureless sintering, we find that calcined powders should be composed of particles that have: (1) fully or partially reacted to the desired minerals, (2) a size of <100 nm and (3) less propensity to coalesce. Such calcined powders are cold isostatically pressed and then vacuum sintered. The temperature and duration of the sintering process are tuned to achieve a balance between high density and fine grain size. Highly dense (i.e., porosity ≤1 vol%) polycrystalline mantle mineral composites with grain size of 0.3–1.1 μm are successfully synthesized with this method.     

Voids in a ΛCDM universe

We study the formation and evolution of voids in the dark matter distribution using various simulations of the popular Λ cold dark matter cosmogony. We identify voids by requiring them to be regions of space with a mean overdensity of −0.8 or less – roughly the equivalent of using a spherical overdensity group finder for haloes. Each of the simulations contains thousands of voids. The distribution of void sizes in the different simulations shows good agreement when differences in particle and grid resolution are accounted for. Voids very clearly correspond to minima in the smoothed initial density field. Apart from a very weak dependence on the mass resolution, the rescaled mass profiles of voids in the different simulations agree remarkably well. We find a universal void mass profile of the form  ρ(< r )/ρ( r _eff) ∝ exp[( r / r _eff)^α]  , where r _eff is the effective radius of a void and  α∼ 2  . The mass function of haloes in voids is steeper than that of haloes that populate denser regions. In addition, the abundances of void haloes seem to evolve somewhat more strongly between redshifts ∼1 and 0 than the global abundances of haloes.     

A 35 kyr record of organic matter composition and δ13C of n-alkanes in bog sediments close to Lake Baikal: Implications for paleoenvironmental studies

We characterized the compositions of organic compounds in a Cheremushka bog sediment core (deposited over the last 35 kyr), located at the eastern coast of Lake Baikal, to obtain basic information about the terrestrial organic matter (OM) which contributed to Lake Baikal sediments. The bog sediment was analyzed for the molecular composition of n-alkanes, lignin phenols and n-C₂₄ to C₃₀ alkanoic acids, as well as the carbon isotopic composition of plant wax derived n-C₂₇ to C₃₃ alkanes.Concentrations of lignin phenols [vanillyl (V) plus syringyl (S) phenols] normalized to total organic carbon (TOC) in the Holocene are twice those for the last glacial maximum (LGM), while concentrations of TOC-normalized n-C₂₄ to C₃₀ alkanoic acids do not change markedly in this period. Thus, the ratio of lignin phenols to n-C₂₄ to C₃₀ alkanoic acids increases from the LGM to the Holocene. This result is essentially consistent with pollen analysis indicating an expansion of woody plants in the Holocene and a prevailing herb-abundant environment for the LGM. The δ¹³C values of n-C₂₇ to C₃₃ alkanes (e.g. ?29‰ to ?33‰ for C₃₁) indicate the presence of C₃-dominant plants throughout the core.The contribution of terrestrial OM to Lake Baikal sediments was estimated using the biomarkers, on the assumption that the OM in the bog sediments is a representative of the terrestrial OM around the lake. Hence, the estimation using lignin phenol or n-C₂₄ to C₃₀ alkanoic acid parameters indicates that 11–24% of the TOC in the Academician Ridge sediments is land-derived for both the Holocene and the LGM, which is similar to the estimates from C/N values of bulk OM. However, the estimates for terrestrial OM using the n-C₂₇ to C₃₃ alkane parameter are generally higher than those using lignin phenol or n-C₂₄ to C₃₀ alkanoic acid parameters. The difference is thought to be associated with the difference in source and behavior of these biomarkers.     

Automated cloud tracking system for the Akatsuki Venus Climate Orbiter data

Japanese Venus Climate Orbiter, Akatsuki, is cruising to approach to Venus again although its first Venus orbital insertion (VOI) has been failed. At present, we focus on the next opportunity of VOI and the following scientific observations.We have constructed an automated cloud tracking system for processing data obtained by Akatsuki in the present study. In this system, correction of the pointing of the satellite is essentially important for improving accuracy of the cloud motion vectors derived using the cloud tracking. Attitude errors of the satellite are reduced by fitting an ellipse to limb of an imaged Venus disk. Next, longitude–latitude distributions of brightness (cloud patterns) are calculated to make it easy to derive the cloud motion vectors. The grid points are distributed at regular intervals in the longitude–latitude coordinate. After applying the solar zenith correction and a highpass filter to the derived longitude–latitude distributions of brightness, the cloud features are tracked using pairs of images. As a result, we obtain cloud motion vectors on longitude–latitude grid points equally spaced. These entire processes are pipelined and automated, and are applied to all data obtained by combinations of cameras and filters onboard Akatsuki. It is shown by several tests that the cloud motion vectors are determined with a sufficient accuracy. We expect that longitude–latitude data sets created by the automated cloud tracking system will contribute to the Venus meteorology.