National flood discharge mapping in Austria

This article presents the approach and the results of a study in which 30, 100 and 200 year return period flood discharges were estimated for 26,000 km of Austrian streams. Three guiding principles were adopted: combination of automatic methods and manual assessments by hydrologists to allow speedy processing and account for the local hydrological situation; combination of various sources of information including flood peak samples, rainfall data, runoff coefficients and historical flood data; and involvement of the Hydrographic Services to increase the accuracy and enhance the acceptance of results. The flood discharges for ungauged catchments were estimated by the Top-kriging approach with manual adjustment to the local flood characteristics. The adopted combination approach proved to be very efficient both in terms of the project time required and in terms of the accuracy and acceptability of the estimated flood discharges of given return periods.     

Modifications of the porous network of sandstone accompanying the formation of black varnish

Black varnish commonly develops on rain-washed fine-grained monument sandstone. Stone modifications are, to the naked eye, limited to 10-μm thick black film and underlying modified zone about 1-mm thick. Transfer properties (absorption and drying kinetics and permeability) are, however, modified several centimetres under the surface. The present study investigates the modifications of black-varnish covered siliceous sandstones taken from Alsatian monuments (East of France) and of fresh sandstone undergoing wetting–drying cycles in the laboratory. Double-coloured thin-sections revealed gradual changes in the porous network, up to 3 cm under the black varnish. SEM observations showed that the film was mainly composed of iron and phosphorus while the modified zone was rich in calcium and sulphur. Fifty capillary absorption–drying cycles were carried out on fresh sandstone. Absorption kinetics was measured at each cycle. A continuous decrease of sandstone absorption kinetics over the fifty cycles was interpreted as a reorganisation of the porous network, reducing the connectivity of the porous network although total porosity remained unchanged. Wetting–drying cycles carried out under an environmental microscope (ESEM) showed a displacement of the finest particles (clay clusters), filling the macroporosity and decreasing the connectivity.     

High‐pressure metamorphism in Taiwan: from oceanic subduction to arc‐continent collision?

Abstract The Taiwan orogen has been the focus of a number of models of mountain building processes, but little attention has been paid to high‐pressure (HP) metamorphic rocks that are found as exotic blocks intermingled within the deepest units of the mountain belt. In this study, we re‐appraise from updated petrological and thermodynamic databases the physical conditions of HP metamorphism in Taiwan, and we combine our findings with available geochronological data to estimate the thermal history of these rocks. Our results indicate that peak metamorphic conditions of ～550 °C and 10–12 kbar have been followed by a rapid isothermal decompression, with exhumation possibly as rapid as burial. These units have subsequently been stored at a pressure of ～3 kbar for ～4–5 Myr, before their final exhumation, probably facilitated by the accretion of passive margin sequences during the Late Cenozoic collision. Therefore, HP units in Taiwan maintain a record of processes at depth from the early stages of oceanic subduction to the present arc‐continent collision.     

Spatial Variability of Rock Depth in Bangalore Using Geostatistical, Neural Network and Support Vector Machine Models

Geospatial technology is increasing in demand for many applications in geosciences. Spatial variability of the bed/hard rock is vital for many applications in geotechnical and earthquake engineering problems such as design of deep foundations, site amplification, ground response studies, liquefaction, microzonation etc. In this paper, reduced level of rock at Bangalore, India is arrived from the 652 boreholes data in the area covering 220 km². In the context of prediction of reduced level of rock in the subsurface of Bangalore and to study the spatial variability of the rock depth, Geostatistical model based on Ordinary Kriging technique, Artificial Neural Network (ANN) and Support Vector Machine (SVM) models have been developed. In Ordinary Kriging, the knowledge of the semi-variogram of the reduced level of rock from 652 points in Bangalore is used to predict the reduced level of rock at any point in the subsurface of the Bangalore, where field measurements are not available. A new type of cross-validation analysis developed proves the robustness of the Ordinary Kriging model. ANN model based on multi layer perceptrons (MLPs) that are trained with Levenberg–Marquardt backpropagation algorithm has been adopted to train the model with 90% of the data available. The SVM is a novel type of learning machine based on statistical learning theory, uses regression technique by introducing loss function has been used to predict the reduced level of rock from a large set of data. In this study, a comparative study of three numerical models to predict reduced level of rock has been presented and discussed.     

Field Measurement of Suction, Water Content, and Water Permeability

This paper presents a review of techniques for field measurement of suction, water content, and water hydraulic conductivity (permeability). Main problems in the use of field tensiometers are addressed and hints on how to improve tensiometer performance are given. Advantages and limitations of instruments for indirect measurement of suction including electrical conductivity sensors, thermal conductivity sensors, dielectric permittivity sensors, filter paper, and psychrometer are discussed. Techniques for water content measurement based on dielectric methods are then presented. These include time and amplitude domain reflectometry and capacitance. Finally, a brief overview of methods for measurement of water permeability in the field is presented.     

SOME EXPERIMENTS CONCERNING THE PRIMARY SEISMIC PULSE*

Recordings were made with three types of detector of the primary compressional (P) and shear (S) wave pulses generated by explosions in boreholes. Charge weights varied from 0.08 kg to 9.5 kg and detector distances varied from about 3 m to about 80 m. Scaling by the simple factor W^1/3 where W is the charge weight, enabled observations from different sized charges to be fitted to a single expression. Experiments were carried out in the Bunter sandstone and the London clay and both fluid and solid tamping were used. This variation in tamping had no significant effect on the P-waves but it may have affected the generation of SV-waves. In both media the P-wave energy carried at 30 m from the shot by frequencies less than 100 Hz decreased rapidly with depth and was usually 1–2 % of the available chemical energy for a shot depth of 15 m. The S-wave energy was much less than this, but was highly directional. The P-wave pulse had the appearance of a damped sinusoid in very good agreement with the predictions of the ‘equivalent radiator’ hypothesis. However, the surface of this radiator should be identified not with the blown cavity but with the surface at which the tensile stresses associated with the stress wave become less than the tensile strength of the rock. The predominant frequency for a 1 kg charge at a depth of 15 m was 24 Hz in the clay and 52 Hz in the sandstone. In these and similar media, therefore, an effort should be made to keep individual charges less than 1 kg in reflection shooting and less than 10 kg in refraction shooting. The value of Q was about 50 in clay and about 25 in the sandstone. These estimates are rather uncertain because of the small distances over which the pulses were observed. The Z-transforms of the sampled pulses indicated that they were all of minimum phase, or very near to it.     

THE DELINEATION OF THE BEDROCK CONFIGURATION OF PART OF PORT JACKSON,NEW SOUTH WALES,WITH A BOOMER SYSTEM*

A high resolution Boomer system was used to investigate the bedrock configuration of part of Port Jackson, New South Wales. The continuous reflection profiling technique was successful in delineating a channel incised in bedrock under a thickness of up to 60 m. of unconsolidated sediment covered by up to 20 m. of water.     

AERIAL SURVEY: COLONY OF HONG KONG

This paper describes the planning and implementation of a very extensive aerial survey contract undertaken by Hunting Surveys on behalf of the Hong Kong Government. From photography carried out during January and February 1963, photogrammetric plotting at 1 : 600 and 1 : 1200 proceeded steadily over a period of 5 years to the point where all but the highest land in the Colony had been surveyed at one or other of these two large scales. The problems arising from the rather unique terrain conditions and the urban and industrial development of Hong Kong are dealt with mainly from the photographic and photogrammetric aspect but reference is made to the contribution of the Crown Lands and Survey Office of the Public Works Department of Hong Kong, who provided all ground control and undertook field verification.