黑海西南陆架(土耳其)全新世沉积物矿物学及其与物源、海平面和海流状态的关系

岩心中沉积物颗粒大小和矿物成分用来研究不同大陆和海洋环境的影响。在全新世,黑海西南陆架地区都处于这种环境。附近沿海腹地主要沉积类型是硅质碎屑泥质夹少量砂质和砾石。陆架边缘、伊斯坦布尔海峡和杜鲁湖(古河口)沉积物为大量生物成因和陆源砂质和砾石。数量不等的文石、10A-云母、石英、长石、方解石、白云石构成主要的非黏土矿物。<2μm的黏土矿物组合为蒙脱石、伊利石、高岭土、绿泥石。文石和方解石主要来自底栖聚集物,而长石(主要是斜长石)和蒙脱石反映其岩浆和火山物源区。10A-云母和绿泥石的分布与附近的变质岩源区相关。然而…     

Progressive failure in stratified and jointed rock mass

Summary This paper describes a mathematical model for analyzing progressive failure in a stratified and jointed rock mass dipping parallel to the slope face. The relationship between the necessary support forces and permissible displacement in the rock mass is discussed. An analytical expression is provided for the minimum required support force corresponding to a critical displacement. This expression is used to evaluate the potential of unstable failure propagation. The effect of time on progressive failure is considered by using a simple rheological model for joints. A case study, involving an excavation in a stratified medium, is used to compare model prediction with monitored performance.     

Evaluation of urban heat island effect in Turkey

Recently, the rate of urbanisation has accelerated due to increasing population density which causes unexpected environmental disturbances and problems. One of the major problems encountered to date is the change in the land use/cover (LULC) structure. Increasing the impervious surface cover has changed microclimatic properties of urbanised areas by altering their thermal characteristics. One of the most important problems facing urban planning today is the phenomena known as the urban heat island (UHI), which is largely due to the changing the character of LULC. In this study, to create a national picture of the UHI structure in Turkey, seven cities, namely Istanbul, Bursa, Ankara, Izmir, Gaziantep, Erzurum and Trabzon, each located in different climatic regions of Turkey, were investigated. The Gaussian fitting technique was applied to characterise the UHI effect in the seven cities in the study. An original contribution of the current study was that the rural reference temperature surface was automatically determined by a proposed algorithm including the automatic masking of input data, as well as the application of iterative Gaussian low-pass filtering during the fitting procedure. Within this context, the daytime and nighttime surface urban heat island (SUHI) effect was modelled and temporally analysed from 1984 to 2011 for all the sub-regions using remote sensing techniques. Furthermore, atmospheric UHI was also investigated using the mobile transect method. The findings from this study suggest that UHI is a major environmental problem in urbanised areas, both atmospheric UHI and SUHI were detected in all cities in the study area, and this problem was found to have rapidly increased from 1984 to 2011. Finally, as inferred from the multiple regression results, it can be concluded that the UHI problem in Turkey might have resulted from the altered LULC structure, as well as anthropogenic pressure on and interference in city planning geometries.     

Application of gravity and magnetic methods for the crustal study and delineating associated ores in the western limb of Hazara Kashmir Syntaxis,Northwest Himalayas,Pakistan

The present geophysical study deals with the ores and crustal demonstration of southeastern Hazara and its adjoining areas of Azad Jammu and Kashmir, Pakistan, on the basis of terrestrial gravity and magnetic data. Tectonically, the study area lies in the Lesser Himalayas as well as to an extent in the sub-Himalaya, more specifically in the western limb of Hazara Kashmir Syntaxis. In this study, 567 gravity and 508 magnetic stations have been measured with CG-5 gravimeter and proton precession magnetometer, respectively. The collected data have been processed by applying standard corrections and then different types of maps were prepared. The ores in the area have been delineated by the qualitative interpretation of residual Bouguer anomaly and reduction to pole total magnetic intensity maps, whereas regional structures are demarcated by the Bouguer anomaly and regional Bouguer anomaly maps. The positive contour closures on the residual Bouguer anomaly map indicate the iron ore and phosphate, whereas negative contour closures are the effects of low-density material which consists of gypsum and soapstone. The pole-reduced total intensity map also shows the negative and positive contour closures almost in the same localities and confirms the residual Bouguer anomaly map. The geological model computed on the basis of Bouguer anomaly demarcated a series of faults between different rock units in the study area. The Kashmir Boundary Thrust cuts the western limb of Hazara Kashmir Syntaxis near the apex in the north of Muzaffarabad and marks the boundary between Murree Formation and carbonates of Abbottabad Formation. The gravity model also suggests that the thickness of the crust increases towards the northeast.     

Numerical analysis of a finite slope improved with stone columns under the effect of earthquake force

Natural Hazards - Slope stability is one of the most important issues of geotechnical engineering. Significant slope failures (landslides), which result from earthquakes, can cause considerable...     

A survey of damage observed in Izmir due to 2020 Samos-Izmir earthquake

Natural Hazards - An earthquake of magnitude 6.9 hit the city of Izmir (Turkey) on 30 October 2020, resulting in 117 deaths (in Turkey) and considerable economic losses. The earthquake also...     

The 2014 seismic hazard model of the Middle East: overview and results

The Earthquake Model of Middle East (EMME) Project aimed to develop regional scale seismic hazard and risk models uniformly throughout a region extending from the Eastern Mediterranean in the west to the Himalayas in the east and from the Gulf of Oman in the south to the Greater Caucasus in the North; a region which has been continuously devastated by large earthquakes throughout the history. The 2014 Seismic Hazard Model of Middle East (EMME-SHM14) was developed with the contribution of several institutions from ten countries. The present paper summarizes the efforts towards building a homogeneous seismic hazard model of the region and highlights some of the main results of this model. An important aim of the project was to transparently communicate the data and methods used and to obtain reproducible results. By doing so, the use of the model and results will be accessible by a wide community, further support the mitigation of seismic risks in the region and facilitate future improvements to the seismic hazard model. To this end all data, results and methods used are made available through the web-portal of the European Facilities for Earthquake Hazard and Risk (www.efehr.org).     

Soil characterization of Tınaztepe region (İzmir/Turkey) using surface wave methods and nakamura (HVSR) technique

To determine the shear wave velocity structure and predominant period features of T?naztepe in ?zmir, Turkey, where new building sites have been planned, active–passive surface wave methods and single-station microtremor measurements are used, as well as surface acquisition techniques, including the multichannel analysis of surface waves (MASW), refraction microtremor (ReMi), and the spatial autocorrelation method (SPAC), to pinpoint shallow and deep shear wave velocity. For engineering bedrock (V _s > 760 m/s) conditions at a depth of 30 m, an average seismic shear wave velocity in the upper 30 m of soil (AV_s30) is not only accepted as an important parameter for defining ground behavior during earthquakes, but a primary parameter in the geotechnical analysis for areas to be classified by V _s30 according to the National Earthquake Hazards Reduction Program (NEHRP). It is also determined that Z1.0, which represents a depth to V _s = 1000 m/s, is used for ground motion prediction and changed from 0 to 54 m. The sediment–engineering bedrock structure for T?naztepe that was obtained shows engineering bedrock no deeper than 30 m. When compared, the depth of engineering bedrock and dominant period map and geology are generally compatible.     

Dynamics Behind Cycles and Co-movements in Metal Prices: An Empirical Study Using Band-Pass Filters

After living one of the most intense metal price cycles, several ongoing macroeconomic phenomena with the potential of structurally redefining the long-run supply and demand for metals, and raising divergency regarding where the metal prices are trending, it is suitable to evaluate the dynamics in the metal prices, especially focus on the long cyclical components. This article studies in detail the cyclical components of the real prices of base metals, iron ore, and gold, applying band-pass filters and a novel decomposition over time series with length as far as 1800. The main findings are: (1) the long cyclical components in real prices are highly correlated among them and with the proposed long economic cycles, (2) short and medium cyclical components are more relevant in explaining the price deviations from their trend, but the long cyclical component is not negligible, (3) co-movement in base metals is strong for all the cyclical components, but decreasing as cyclical frequency increases, and (4) prices are either sideways or upward-trending depending on the assumptions for correction of the US Consumer Price Index, which suggests that the supply side of these industries, in the best case, only offset the cost increases by depletion.