Abundance of larval rainbow smelt (Osmerus mordax) in relation to the maximum turbidity zone and associated macroplanktonic fauna of the middle St. Lawrence estuary

We tested the hypothesis that the distribution and retention of larval smelt (Osmerus mordax) in the middle estuary of the St. Lawrence River is related to the maintenance of other planktonic organisms in the maximum turbidity zone (MTZ). We documented the horizontal and vertical distribution of larval smelt, macrozooplankton, and suspended particulate matter over four tidal cycles at each of three stations located along the major axis of the turbid upstream portion of the middle estuary. During summer, the turbid, warm, and low salinity waters of the two upstream stations were characterized byNeomysis americana, Gammarus sp. (principallyG. tigrinus), larval smelt,Mysis stenolepsis, andCrangon septemspinosus. The more stratified and less turbid waters of the downstream station were characterized by a coastal marine macrozooplanktonic community and the almost total absence of smelt larvae. Within the MTZ, the distribution ofN. americana coincided with the zone of longest average advective replacement times (null zone). Smelt larvae were distributed further upstream within the MTZ thanN. americana. Overall, larger larvae were distributed further upstream than smaller larvae. The relationship between turbidity and larval density at a specific time was weak (due to resuspension of sediments but not larvae), but the mechanism responsible for producing higher residence times for both sediment and larvae on a longer term basis appears the same. The daily movement and skewed nature of the null zone (due to the general cyclonic circulation of the middle estuary) defines a geographic zone over which the larval smelt population oscillates and remains despite the mean downstream velocities over the water column.     

Geophysical transects of the Labrador Sea: Labrador to southwest Greenland

In 1977 the Federal Institute for Geosciences and Natural Resources, Hannover, carried out a large scale multichannel reflection seismic survey in the Labrador Sea. This survey provided an opportunity for the direct comparison of the geologic structure of the Labrador and Greenland margins. The seismic records across the Labrador Shelf show a thick, prograding sedimentary wedge consisting of several seismic sequences onlapping an acoustic basement that dips steeply seaward. The surface of the acoustic basement is irregular below the continental slope, indicating Late Cretaceous—Early Tertiary faulting. The thick sedimentary section below the slope is divided by an unconformity, tentatively identified as Late Tertiary in age, into two seismic megasequencies which can be subdivided. The acoustic basement on the Greenland side is also strongly faulted but is overlain, in the south, by a thin sedimentary section. The sediment cover thickens on the Greenland Shelf to the north as the shelf becomes wider.As with more southerly parts of the western Atlantic margin, a positive free-air anomaly (30–50 mgal) lies landward of the shelf break off Labrador and a smaller negative anomaly follows the base of the slope. Similar, but generally narrower features are observed along the Greenland margin. West of the negative anomaly off the Greenland slope a narrow band of lower amplitude positive anomalies tends to be associated with an acoustic basement high observed in the reflection profiles. A landward negative gradient in the simple Airy isostatic anomaly across this margin suggests that the ocean—continent boundary is related to this high.Detailed magnetic measurements across the northern Labrador margin show that well-developed oceanic anomalies trending north-northwest lie east of the large Labrador Shelf gravity high, beyond the 2000 m isobath. Landward of these magnetic anomalies is a quiet magnetic zone within which the linear gravity high is parallel to the shelf break and correlates with a deep, sediment-filled basin. It is inferred that oceanic-type crust or greatly-attenuated continental crust underlies this basin and that continental crust thickens markedly westward of the gravity high over a distance of about 50 km.     

Theoretical Love wave dispersion in a single layer model

Summary From a study of the Love wave dispersion in a single layer model it is shown that the shape of the dispersion curves is very insensitive to the changes in the density ratio. The bilogarithmic grids giving dispersion curves for different shear velocity ratios and a mean density ratio of 1.20 should be sufficient for interpretation by the method of curve matching. Such grids and the numerical data are given both for the phase velocity and the group velocity. An example is given illustrating the use of these grids.     

Factors driving international technology transfer: empirical insights from a CDM project survey

This study empirically explores factors driving international technology transfer via Clean Development Mechanism (CDM) projects by explicitly considering factors that have been identified in the literature on international technology transfer as being relevant for transfer success. These factors include technological characteristics, such as the novelty and complexity of a technology, as well as the use of different transfer channels. Employing data from an original survey of CDM project participants, the econometric analysis also distinguishes between knowledge and equipment transfer. The findings suggest that more complex technologies and the use of export as a transfer channel are both associated with a higher degree of technology transfer. Projects involving two- to five-year-old technologies seem more likely to involve technology transfer than both younger and older technologies. Energy supply and efficiency projects are correlated with a higher degree of technology transfer than non-energy projects. Unlike previous studies, technology transfer was not related to project size, to the length of time a country has hosted CDM projects, or to the host country's absorptive capacity. The findings for knowledge and equipment transfer are similar, but not identical.

Policy relevance

CDM projects are often seen as a vehicle for the transfer of climate technologies from industrialized to developing countries. Technology transfer is an important element of the new and emerging market mechanisms and frameworks under the United Nations Framework Convention on Climate Change, such as the Technology Mechanism, Nationally Appropriate Mitigation Actions, or Intended Nationally Determined Contributions. Thus, a clearer understanding of the factors driving technology transfer may help policy makers in their design of such mechanisms. For the CDM, this may be achieved by including more stringent technology transfer requirements in countries’ CDM project approval processes. Based on our findings, such policies should focus particularly on energy supply and efficiency technologies. Likewise, it may be beneficial for host countries to condition project approval on the novelty and complexity of technologies and adjust these provisions over time. Since such technological characteristics are not captured systematically by project design documents, using a survey-based evaluation opens up new opportunities for a more holistic and targeted evaluation of technology transfer in CDM projects.     

Future changes of El Niño in two global coupled climate models

Idealized forcing experiments with 1% per year CO₂ increase to stabilized doubled and quadrupled CO₂, twenty-first century transient scenario experiments (SRES scenarios A1B and B1), and stabilized twenty-second century A1B and B1 experiments with two global coupled climate models (PCM and CCSM3) are analyzed for possible future changes of El Niño events. With increased CO₂ in the models, there is a reduction of amplitude of El Niño events. This is particularly apparent with larger forcing in the stabilized 4×CO₂ experiment in PCM and the stabilized greenhouse gas A1B experiment in CCSM3, where the reduction of amplitude is outside the range of the inherent multi-century variability of El Niño in the control runs of the models and is statistically significant. With moderately increased forcing (stabilized 2×CO₂ in PCM and the stabilized B1 experiment in CCSM3), the reduction in amplitude is evident, but it is not significant. The change in El Niño behavior with larger forcing is attributed to the change in base state temperature in the equatorial Pacific, which is similar with increased greenhouse gases (GHGs) in both models. Positive temperature anomalies in and below the thermocline, associated with a reduction of the trade winds, and weakened Pacific Ocean subtropical cells, produce a less intense thermocline, and consequently lower amplitude El Niño events. The previously noted intensification of El Niño tropical precipitation anomalies in a warmer mean base state that applied when there was no appreciable change in El Niño amplitude does not hold in the present study where the El Niño events decrease in magnitude in a future warmer climate. North American surface temperature anomalies associated with El Niño are reduced and become less significant in the future events, with the anomalously deepened Aleutian low in the North Pacific weakened and moved eastward with greater radiative forcing. Part of this is attributed to the smaller amplitude events and thus lower amplitude teleconnections as indicated by contrasting composites of medium and high amplitude El Niño events from the control runs. The change in midlatitude base state circulation also contributes to the change in El Niño teleconnections. The effects of this change in base state on the weakened El Niño teleconnections over North America are confirmed in sensitivity experiments with a version of the atmospheric model in which heating anomalies are specified to mimic El Niño events in a base state changed due to increased GHGs.     

Luminescence dating of canal sediments from Angkor Borei, Mekong Delta, Southern Cambodia

Work to apply luminescence dating to archaeological sites in the Lower Mekong Delta has continued with a programme aimed at dating ancient canal sediments and brick monuments in the vicinity of ancient city of Angkor Borei. Following the successful application of OSL dating to the Paris 2 canal near Angkor Borei further fieldwork and analysis has been undertaken. The infill and substrate of the larger Paris 4 canal connecting Angkor Borei to Oc Eo, some 80 km to the south in Vietnam has been sampled and subjected to luminescence analysis. Field spectroscopy and underwater bleaching experiments were also conducted in the Baray and Angkor Borei in 2004. The results show that both illumination intensities and spectral distributions are severely altered by as little as 1.5 m of turbid water, and that OSL bleaching rates for both quartz and feldspars are reduced. Since quartz resetting is heavily dependant on the UV components in daylight, which have preferentially attenuated the effects of turbid water on OSL zeroing rates are especially marked. The new data from the Paris 4 canal, which has been dated by OSL to be between the first millenium BC and the late first millenium AD are significant to understanding the archaeological development of the Fu Nan state in the Lower Mekong Delta, and the sequence of development of the canal network linking inland agrarian sites and coastal trading centres.     

Field scale impacts of spatially correlated relative permeability in heterogeneous multiphase systems

Two-dimensional numerical simulations of two-phase (DNAPL-water) flow in spatially correlated random fields demonstrate the influence of nonwetting phase (NWP) relative permeability–saturation (k_r,N–S_W) relationships correlated to porous media intrinsic permeability (k). Both the volume of porous media invaded by the NWP and the length of time during which the NWP is migrating are under predicted if k_r,N–k correlation is not accounted for in the model formulation. Not accounting for the k_r,N–k correlation resulted in under predicting the volume of porous media invaded by up to approximately 10%, which is likely not significant for many practical applications. However, not accounting for the k_r,N–k correlation resulted in under predicting field scale migration times by up to a factor of 4, which is likely significant in that the migration times are on the order of years to several decades for the DNAPL (1,2-DCE) considered in this study. The under prediction of migration times was greater for lower permeability aquifers.     

Measuring quartz solubility by in situ weight-loss determination using a hydrothermal diamond cell

The solubility of quartz was determined using a hydrothermal diamond anvil cell (HDAC) within the temperature and pressure ranges of 126 to 490°C and up to 8.9 kbar, respectively. A novel approach has been used to measure the amount of dissolved silica. The quartz was abraded into spheres which have a diameter of ∼40 μm. The spheres were then placed in pure water inside the diamond anvil cell and heated externally. Because the transparency of the diamonds allows direct observation of the sample chamber during the experiment, we were able to estimate the amount of quartz dissolved in the water at various stages of the dissolution process by measuring the decrease in the sphere’s diameter over time. Experiments were performed along isochores between 0.92 and 0.99 g/cm³. The maximum solubility measured was 0.165 molal. The experimental solubility data were limited to 370°C because of overestimation of solubilities above this temperature. Reprecipitation of silica inside the HDAC sample chamber and the refaceting of the spheres to trigonal form at temperatures above 350°C are major contributors to the overestimation.