Study of the spatial and historical distribution of sediment inorganic contamination in the Toulon bay (France)

This study presents trace elements levels in surface and deep sediments of the Toulon bay (SE France) subjected to anthropogenic inputs (navy base, harbors, etc.). The studied elements (As, Cd, Cr, Cu, Hg, Ni, Pb, Zn) are defined as priority contaminants in aquatic systems. Fifty-five points scattered on the entire bay were sampled, allowing the determination of contaminants distribution with a high resolution. Several approaches were used to assess the degree of contamination and the potential toxicity of the Toulon bay sediments: comparison to the French legislation, surface-weighted average metal concentrations, enrichment factors (EF), geoaccumulation indices (Igeo), trace element stock calculation and comparison to sediment quality guidelines. A principal component analysis was performed to reveal common behavior of the studied contaminants. Results demonstrated the very high contamination of the small bay, especially in Hg (EF up to 1500), Cu, Pb and Zn, with export to the large bay further governed by hydrodynamics.     

Singular value decomposition as a denoising tool for airborne time domain electromagnetic data

Airborne time domain electromagnetic (TDEM) surveys are increasingly carried out in anthropized areas as part of environmental studies. In such areas, noise arises mainly from either natural sources, such as spherics, or cultural sources, such as couplings with man-made installations. This results in various distortions on the measured decays, which make the EM noise spectrum complex and may lead to erroneous inversion and subsequent misinterpretations. Thresholding and stacking standard techniques, commonly used to filter TDEM data, are less efficient in such environment, requiring a time-consuming and subjective manual editing. The aim of this study was therefore to propose an alternative fast and efficient user-assisted filtering approach. This was achieved using the singular value decomposition (SVD). The SVD method uses the principal component analysis to extract into components the dominant shapes from a series of raw input curves. EM decays can then be reconstructed with particular components only. To do so, we had to adapt and implement the SVD, firstly, to separate clearly and so identify easily the components containing the geological signal, and then to denoise properly TDEM data.The reconstructed decays were used to detect noisy gates on their corresponding measured decays. This denoising step allowed rejecting efficiently mainly spikes and oscillations. Then, we focused on couplings with man-made installations, which may result in artifacts on the inverted models. An analysis of the map of weights of the selected “noisy components” highlighted high correlations with man-made installations localized by the flight video. We had therefore a tool to cull most likely decays biased by capacitive coupling noises. Finally, rejection of decays affected by galvanic coupling noises was also possible locating them through the analysis of specific SVD components. This SVD procedure was applied on airborne TDEM data surveyed by SkyTEM Aps. over an anthropized area, on behalf of the French geological survey (BRGM), near Courtenay in Région Centre, France. The established denoising procedure provides accurate denoising tools and makes, at least, the manual cleaning less time consuming and less subjective.     

Influence of water mixing on the inhibitory effect of UV radiation on primary and bacterial production in Mediterranean coastal water

The scaling of the solar ultraviolet radiation (UVR, 280–400 nm) effect on phyto- and bacterio-plankton at the ecosystem level is difficult since its estimate is often based on short-time incubation experiments performed at fixed depths, neglecting the previous days’ radiation history and the variable radiation caused by vertical mixing. To examine this issue, we measured primary (PP) and bacterial (BP) production in samples from coastal water in the Northwest Mediterranean Sea incubated at fixed depths or moving vertically within the water column (0–8 m) with a periodicity of 22 min, exposed to full sun, PAR or maintained in dark. Three experiments were carried out on consecutive days to measure day-to-day variations in planktonic response. In surface waters, PP was inhibited by ~32 to 42% by UVR, and BP was inhibited by ~50 to 70% by solar radiation (UVR + PAR). We observed a general decrease in the integrated inhibition of PP due to UVR for both fixed and moving incubations over the 3 days from ~27% of inhibition to non-significant inhibition. In contrast, large discrepancies were observed in the integrated inhibition of BP due to solar radiation (UVR + PAR) between fixed and moving incubations. Whereas both type of incubations gave similar estimation of solar radiation inhibition on day 1 (~25%), inhibition became much higher for fixed incubation compared to moving incubation on days 2 and 3. Differences in responses between days suggest that light history, spectral quality, photoadaptation or acclimation may be important factors in daily observed responses. Our results also underline, for the first time, the importance of the vertical mixing in the BP inhibition by solar radiation.     

MIDI – the 10 μm instrument on the VLTI

After more than five years of preparation, the mid-infrared interferometric instrument MIDI has been transported to Paranal where it will undergo testing and commissioning on theVery Large Telescope Interferometer VLTI from the end of 2002through large part of this year 2003. Thereafter it will be available as a user instrument to perform interferometric observations over the8 μm–13 μm wavelength range, with a spatial resolution of typically 20 milliarcsec, a spectral resolution of up to 250, and an anticipated point source sensitivity of N = 3–4 mag or 1–2.5 Jy for self –fringe tracking, which will be the only observing mode during the first months of operation. We describe the layout of the instrument, laboratory tests, and expected performance, both for broadband and spectrally resolved observing modes. We also briefly outline the planned guaranteed time observations. This revised version was published online in July 2006 with corrections to the Cover Date.     

A preliminary methods comparison for measurement of dissolved organic nitrogen in seawater

Routine determination of dissolved organic nitrogen (DON) is performed in numerous laboratories around the world using one of three families of methods: UV oxidation (UV), persulfate oxidation (PO), or high temperature combustion (HTC). Essentially all routine methods measure total dissolved nitrogen (TDN) and calculate DON by subtracting the dissolved inorganic nitrogen (DIN). While there is currently no strong suggestion that any of these methods is inadequate, there are continuing suspicions of slight inaccuracy by UV methods.This is a report of a broad community methods comparison where 29 sets (7 UV, 13 PO, and 9 HTC) of TDN analyses were performed on five samples with varying TDN and DIN concentrations. Analyses were done in a “blind” procedure with results sent to the first author. With editing out one set of extreme outliers (representing 5 out of 145 ampoules analyzed), the community comparability for analyzing the TDN samples was in the 8–28% range (coefficient of variation representing one standard deviation for the five individual samples by 28 analyses). When DIN concentrations were subtracted uniformly (single DIN value for each sample), the comparability was obviously worse (19–46% cv). This comparison represents a larger and more diverse set of analyses, but the overall comparability is only marginally better than that of the Seattle workshop of a decade ago. Grouping methods, little difference was seen other than inconclusive evidence that the UV methods gave TDN values for several of the samples higher than HTC methods. Since there was much scatter for each of the groups of methods and for all analyses when grouped, it is thought that more uniformity in procedures is probably needed. An important unplanned observation is that variability in DIN analyses (used in determining the final analyte in most UV and PO methods) is essentially as large as the variability in the TDN analyses.This exercise should not be viewed as a qualification exercise for the analysts, but should instead be considered a broad preliminary test of the comparison of the families of methods being used in various laboratories around the world. Based on many independent analyses here, none of the routinely used methods appears to be grossly inaccurate, thus, most routine TDN analyses being reported in the literature are apparently accurate. However, it is not reassuring that the ability of the international community to determine DON in deep oceanic waters continues to be poor. It is suggested that as an outgrowth of this paper, analysts using UV and PO methods experiment and look more carefully at the completeness of DIN conversion to the final analyte and also at the accuracy of their analysis of the final analyte. HTC methods appear to be relatively easy and convenient and have potential for routine adoption. Several of the authors of this paper are currently working together on an interlaboratory comparison on HTC methodology.     

A model of dimethylsulfide dynamics for the subtropical North Atlantic

Dimethylsulfide (DMS) is a volatile sulfur compound produced by the marine biota. The flux of DMS to the atmosphere may act on climate via aerosol formation. It is therefore important to improve our understanding of the processes that regulate sea surface DMS concentrations for eventual inclusion into climate models. In order to simulate the dynamics of DMS concentrations in the mixed layer, a model of DMS production was developed and calibrated against a 1 year time-series of DMS and DMSP (dissolved and particulate) data collected in the Sargasso Sea at Hydrostation ‘S’. The model reproduces the observed divergence between the seasonal cycles of particulate DMSP, the DMS precursor produced by algae, and DMS produced through the microbial loop from the cleavage of dissolved DMSP. DMSP_p (particulate) reaches its maximum in the spring whereas DMSP_d (dissolved) and DMS reach maximum concentrations in summer. Several parameters had to vary seasonally and with depth in order to reproduce the data, pointing out the importance of physiological and structural changes in the plankton food web. These parameters include the intracellular S(DMSp):N ratio, the C:Chl ratio and the sinking rates of phytoplankton and detritus. For the Sargasso Sea, variations in the solar zenithal angle, which co-vary with the seasonal variations in the depth of the mixed layer, proved to be a convenient signal to drive the seasonal variation in the structure and dynamics of the plankton. Variations of the temperature and photosynthetically active radiation also help to reproduce the short-term variability of the annual S cycle. Results from a sensitivity analysis show that variations in DMSP_p are dependent mostly on parameters controlling phytoplankton biomass, whereas DMS is dependent mostly on variables controlling phytoplankton productivity.     

Spatio-temporal variation of suspended and sedimentary organic matter quality in the Bay of Marseilles (NW Mediterranean) assessed by biochemical and isotopic analyses

Isotopic and biochemical features of suspended particulate organic matter (POM) in the water column and of sedimentary organic matter (SOM) were investigated seasonally in the Bay of Marseilles. Biochemical compounds (carbohydrates, lipids and proteins) were consistently more concentrated in POM than in SOM, with SOM mainly composed of insoluble carbohydrates. POM displayed lower δ(13)C and higher δ(15)N values than SOM. Phytoplanktonic production represented the major contributor of POM year-round with spatial and seasonal variations. Climatic parameters and wind-induced currents created differences in POM contributions, with more important inputs of terrestrial OM at one sampling site. Spatial and seasonal variations were lower for SOM. The composition of this pool appeared to be linked with the permanent inputs of phytoplankton and Posidonia oceanica detritus. The combined use of biochemical and isotopic analyses was a useful tool to characterize OM pools and would help understanding the trophic functioning of this coastal environment.     

The Exo-Zodiacal Disk Mapper: A Space Interferometer to Detect and Map Zodiacal Dust Disks Around Nearby Stars

We present a concept for a space mission designed to make a mid-IR survey of potential zodiacal dust disks around nearby stars. We show that a two-aperture (0.6 m diameter), 10-m baseline, nulling interferometer located in a 1 × 4 AU, 4-yr solar orbit would allow for the survey of 400 stars in the solar neighborhood and permit a first-order determination of the disk inclination and radial dependences of density and temperature. The high dynamic range of the instrument may also be used to study additional astrophysical phenomena. Beyond its own scientific merit, such a mission would serve as a technological precursor to a larger interferometer of the type being considered for the detection of earth-like planets.     

Stratospheric N2O5, CH4, and N2O profiles from IR solar occultation spectra

Stratospheric volume mixing ratio profiles of N₂O₅, CH₄, and N₂O have been retrieved from a set of 0.052 cm^–1 resolution (FWHM) solar occultation spectra recorded at sunrise during a balloon flight from Aire sur l'Adour, France (44° N latitude) on 12 October 1990. The N₂O₅ results have been derived from measurements of the integrated absorption by the 1246 cm^–1 band. Assuming a total intensity of 4.32×10^–17 cm^–1/molecule cm^–2 independent of temperature, the retrieved N₂O₅ volume mixing ratios in ppbv (parts per billion by volume, 10^–9), interpolated to 2 km height spacings, are 1.64±0.49 at 37.5 km, 1.92±0.56 at 35.5 km, 2.06±0.47 at 33.5 km, 1.95±0.42 at 31.5 km, 1.60±0.33 at 29.5 km, 1.26±0.28 at 27.5 km, and 0.85±0.20 at 25.5 km. Error bars indicate the estimated 1- uncertainty including the error in the total band intensity (±20% has been assumed). The retrieved profiles are compared with previous measurements and photochemical model results.Laboratoire associé aux Universités Pierre et Marie Curie et Paris Sud.     

Direct Determination of Lead Isotope Ratios by Laser Ablation-Inductively Coupled Plasma-Quadrupole Mass Spectrometry in Lake Sediment Samples

A direct method for the determination of lead isotopic ratios by laser ablation-inductively coupled plasma-quadrupole mass spectrometry (LA-ICP-QMS) is presented. Samples of lake sediments were ground and pressed as pellets before being analysed. Mass bias was corrected by analysing an external calibration sample manufactured with pure silica doped with NIST SRM 981 solution. The efficiency of the mass bias correction was checked by comparing the ICP-MS data with lead isotopic ratios determined by thermal ionisation mass spectrometry (TIMS). The average long term reproducibilities were 0.40%, 0.40%, 0.20% and 0.30% (RSD) respectively for the ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb, ²⁰⁶Pb/²⁰⁷Pb and ²⁰⁸Pb/²⁰⁶Pb ratios. The method was applied to the study of lake sediment samples, in order to determine the amount and origin of historical contamination by lead.