Response of BITS (a benthic index based on taxonomic sufficiency) to water and sedimentary variables and comparison with other indices in three Adriatic lagoons

The European Water Framework Directive (WFD, 2000/60/EC) recommends the development of biotic indices for assessing the ecological quality status of water bodies. The Benthic Index based on Taxonomic Sufficiency (BITS) was specifically developed for lagoonal systems, according to the tolerant/opportunistic approach. Macrobenthic data, variables indicative of eutrophication and variables indicative of sedimentary organic matter quality were collected during 18 surveys carried out between 2004 and 2005 in three Adriatic coastal lagoons (Venice Lagoon, Sacca di Goro, Lesina Lagoon). The relationship between environmental variables and biotic indices (AMBI, BENTIX, BITS, BOPA and FINE) was tested using multivariate analyses. Indices based on species classification level appeared to relate better with the variables describing organic matter quality, whereas BITS, which is based on family classification level, seemed related to eutrophication indicative variables, such as sulphide, ammonium, dissolved oxygen and orthophosphate concentrations. The BITS approach reduces the costs associated with sorting and identification of organisms. Providing a rapid assessment of ecological quality, and producing an ecologically relevant classification, BITS seems a promising tool for monitoring programs of Adriatic lagoonal ecosystems. Its sensitivity in reflecting the field conditions elsewhere, however, remains to be assessed.     

GRBs in the 5-10 keV regime as seen by BATSE

The BATSE Spectroscopy Detectors (SDs) each have a thin beryllium window which allows detection of photons down to 5 keV. Until recently, exploitation of low-energy SD discriminator data has been held up by a lack of knowledge of its energy coverage. A recent series of in-flight changes in the instrument configuration has allowed the SD discriminators to be calibrated fairly accurately. With this in hand, we have surveyed BATSE GRBs for such features as X-ray precursors and after-glows in the roughly 5-10 keV band. For a large percentage of the BATSE bursts, no emission is observed in this energy band. In some cases where low-energy emission has been observed, ratios of flux histories indicate differential spectral evolution. In addition, we have obtained joint spectral fits between the low-energy data and the regular SD data, showing that a single spectral model is sometimes insufficient to fit the entire energy range.     

Amphipod predation by the infaunal polychaete,Nephtys incisa

Survival of the tubicolous amphipodAmpelisca abdita in a sediment toxicity test was negatively correlated with the presence of indigenousNephtys incisa. The gut contents ofN. incisa held in uncontaminated sediment included identifiable portions of the amphipods.A. abdita andMicrodeutopus gryllotalpa. Although most nephtyid polychaete worms are active predators,Nephtys incisa has been considered a nonselective deposit-feeder. We coclude thatN. incisa will prey upon amphipods under laboratory conditions. This predation may be a factor in the exclusion of surface-dwelling amphipods from theNephtys-Nucula community common in southern New England.     

Impacts of primary deforestation upon limestone slopes in northern Vancouver Island, British Columbia

Effects of deforestation upon slopes in limestones and in volcanic rocks in the Benson River valley, northern Vancouver Island, have been investigated quantitatively. Postlogging soil erosion and vegetal regeneration success were assessed by measuring soil depth, percent bare rock and moss cover, and the numbers and diversity of trees, shrubs, and plants on 25 sampling sites, each containing ten measuring quadrats selected at random. Sixteen sites were on the Quatsino Formation, a well-karstified limestone, and nine on the Karmutsen Formation of basaltic lavas. Eight sites were of virgin forest, 16 were logged between 1970 and 1983, and one (on limestone) was logged in 1911. Both bedrock types were significantly affected by the cutting. There was greater loss of soil and an increase in bare rock on the limestones. Erosion was increased significantly by burning on the limestones but not on the volcanics. Within-group comparisons on the limestones determined that steeper slopes and harder burned areas suffered the most and are slowest to regenerate. Volume of timber on the 1911 site was 19 percent of that in similar uncut forest sites. It appears that complete recovery on the barren limestone slopes will require at least some centuries.     

The effect of crystallization on the rheology and dynamics of lava flows

The dynamics of a lava flow is studied by a two-dimensional model describing a viscous fluid with Bingham rheology, flowing down a slope. The temperature in the flow is calculated assuming that heat is transferred through the plug by conduction and is lost by radiation to the atmosphere at the top of the flow. Taken into account is that the increasing crystallization takes place in the flow as a consequence of cooling. The lava viscosity and yield stress are expressed as a function of crystallization degree as well as of temperature: in particular it is assumed that yield stress reaches a maximum value above the solidus temperature, according to experimental data. Dynamical variables, such as velocity and thickness of the flow, are calculated for different values of the maximum crystallization degree and the flow rate. The model shows how the lava flow dynamics is affected by cooling and crystallization. The cooling of the flow is controlled by the increase of yield stress, which produces a thicker plug and makes the heat loss slower. The increasing crystallization has two opposing effects on viscosity: it produces an increase of viscosity, but at the same time produces an increase of yield stress and hence reduces the heat loss and keeps the internal temperature high. As a consequence, lava flows are significantly affected by the dependence of yield stress on temperature and scarcely by the maximum crystallization degree.     

A comparison of two methods of estimating transpiration rates from a Sitka spruce plantation

Estimates of hourly transpiration from a 16–17 yr old Sitka spruce forest were calculated from the Penman-Monteith combination equation and compared with estimates from an eddy correlation/energy balance method.Canopy conductances were estimated from stomatal conductances measured using null balance diffusion porometers and took account of canopy variations of stomatal conductance and needle area index.Vertical heat fluxes were measured by the eddy correlation method; transpiration fluxes were then estimated from an energy balance of the forest.There was not a 1:1 relationship between the estimates of transpiration from the two methods. The major sources of error were concluded to be (i) difficulties of estimating the variation in stomatal conductance and leaf area through the canopy, (ii) errors in the value of total leaf area index, and (iii) errors in stomatal conductance measurements.The eddy correlation method was suggested as the more useful for future studies of the variation of forest transpiration in time or space, because the Penman-Monteith equation requires extensive biological measurements.     

Rapid entrenchment of stream profiles in the salt caves of Mount Sedom,Israel

Rock salt is approximately 1000 times more soluble than limestone and thus displays high rates of geomorphic evolution. Cave stream channel profiles and downcutting rates were studied in the Mount Sedom salt diapir, Dead Sea rift valley, Israel. Although the area is very arid (mean annual rainfall ≈ 50 mm), the diapir contains extensive karst systems of Holocene age. In the standard cave profile a vertical shaft at the upstream end diverts water from a surface channel in anhydrite or clastic cap rocks into the subsurface route in the salt. Mass balance calculations in a sample cave passage yielded downcutting rates of 0–2 mm s^?1 during peak flood conditions, or about eight orders of magnitude higher than reported rates in any limestone cave streams. However, in the arid climate of Mount Sedom floods have a low recurrence interval with the consequence that long-term mean downcutting rates are lower: an average rate of 8·8 mm a^?1 was measured for the period 1986–1991 in the same sample passage. Quite independently, long-term mean rates of 6·2mm a^?1 are deduced from ¹⁴C ages of driftwood found in upper levels of 12 cave passages. These are at least three orders of magnitude higher than rates established for limestone caves. Salt cave passages develop in two main stages: (1) an early stage characterized by high downcutting rates into the rock salt bed, and steep passage gradients; (2) a mature stage characterized by lower downcutting rates, with establishment of a subhorizontal stream bed armoured with alluvial detritus. In this mature stage downcutting rates are controlled by the uplift rate of the Mount Sedom diapir and changes of the level of the Dead Sea. Passages may also aggrade. These fast-developing salt stream channels may serve as full-scale models for slower developing systems such as limestone canyons.     

Rates of cave and landform development in the Yorkshire Dales from speleothem age data

Uranium-series ages have been obtained for 87 speleothems collected from nine major cave systems in the Craven district of northern England. Large systems such as Ease Gill Caverns, the West Kingsdale caves, and Gaping Gill-Ingleborough Cave, which contain relict high-level tunnels, are found to be older than 350,000 years (the limit of the ²³⁰Th/²³⁴U dating method). There is little evidence to indicate a significant enlargement of these passages since this time. Estimates of the age of Victoria Cave from ²³⁴U/²³⁸U isotopic ratios suggest that the cave has been fully relict for more than 500,000 years. Ages of in situ speleothems immediately adjacent to local base level cave streams show that mean maximum downcutting rates in limestone channels are about 2 to 5 cm 1000 yr. These rates are significantly lower than those obtained from direct measurements on limestone bedrock in stream channels but are comparable to areal denudation rates based on solute budgets. Using the present elevation of caves with respect to adjacent valley floor levels, mean maximum valley entrenchment rates are found to range between 5 cm/ky and < 20cm/ky, which corresponds to 6 m to < 24 m of lowering per glacial/interglacial cycle. These rates suggest that upper beds of the limestone were incised to form the Yorkshire Dales between 1 and 2 million years ago. The results indicate that the erosional effects of individual glaciations are not as severe as previously proposed in the literature.