Pressure-induced phase transition in Mg0.8Fe0.2O ferropericlase

Combined X-ray powder diffraction, Mössbauer, and XANES spectroscopy in situ experiments revealed the transformation of cubic (Mg_0.8Fe_0.2)O ferropericlase to a rhombohedrally distorted phase at 35(1) GPa and room temperature. The Mössbauer spectroscopy results show that the rhombohedral distortion does not involve magnetic ordering. Combined with data from the literature, our results imply that the cubic to rhombodedral transition occurs in (Mg,Fe)O under conditions of non-hydrostatic stress over a wide range of composition (0.2≤x _Fe≤1).     

Characterization of particulate matter in the Apulia Region (South of Italy): features and critical episodes

The chemical composition of PM₁₀ and PM_2.5 samples collected during two seasonal monitoring campaigns at residential, urban and industrial Apulia Region- sites was investigated. Ionic fraction, carbonaceous compounds and Polycyclic Aromatic Hydrocarbons were determined for all samples. High correlations among PM data collected in the investigated sites suggested the regional character of particulate matter. It was also confirmed by five days back trajectories analysis. Moreover, no significant seasonal trend in PM mass concentration was observed in the investigated sites. These results, relevant for the area under investigations, were not observed in the North of Italy and Europe and allow to conclude that PM₁₀ and PM_2.5 cannot be considered ‘good’ indicators for the evaluation of local anthropic contributions to air quality. On the contrary, the high levels of Polycyclic Aromatic Hydrocarbons found in Taranto sampling sites suggested that PAHs can be a better indicator for this purpose. This result is also relevant in order to weigh the importance of industrial area and to suggest right policy control to decision makers.     

Seismic risk assessment for developing countries: Pakistan as a case study

Modern Earthquake Risk Assessment (ERA) methods usually require seismo-tectonic information for Probabilistic Seismic Hazard Assessment (PSHA) that may not be readily available in developing countries. To bypass this drawback, this paper presents a practical event-based PSHA method that uses instrumental seismicity, available historical seismicity, as well as limited information on geology and tectonic setting. Historical seismicity is integrated with instrumental seismicity to determine the long-term hazard. The tectonic setting is included by assigning seismic source zones associated with known major faults. Monte Carlo simulations are used to generate earthquake catalogues with randomized key hazard parameters. A case study region in Pakistan is selected to demonstrate the effectiveness of the method. The results indicate that the proposed method produces seismic hazard maps consistent with previous studies, thus being suitable for generating such maps in regions where limited data are available. The PSHA procedure is developed as an integral part of an ERA framework named EQRAM. The framework is also used to determine seismic risk in terms of annual losses for the study region.     

Temporal Dynamics and Biomass Partitioning in Three Adriatic Seagrass Species: Posidonia oceanica,Cymodocea nodosa,Zostera marina

Abstract. The temporal dynamics of three seagrasses, Posidonia oceanica, Cymodocea nodosa and Zostera marina, was studied in different areas of the Adriatic Sea by analysing phenological parameters and biomass trends in different compartments of seagrass systems. For this purpose, samplings were conducted in 1997 once per season at each station, Otranto (southern Adriatic Sea) and Grado (northern Adriatic Sea). Structural parameters and biomass of plant compartments differed among seagrasses both in absolute values and in seasonal variability. P. oceanica was the largest plant, showing the highest number of leaves per shoot, highest leaf surface, Leaf Area Index and shoot weight. Z. marina was intermediate in size and had the longest leaves, whereas C. nodosa was the smallest seagrass. P. oceanica accounted for the highest total biomass (mean ± SE: 1895.9 ± 180.2 g DW · m^–2; CV = coefficient of variation: 19.0 %), considerably more than C. nodosa (mean ± SE: 410.4 ± 88.4 g DW·m^–2; CV: 43.1 %) and Z. marina (mean ± SE: 312.1 ± 75.1 g DW · m^–2; CV: 48.1 %), although the two latter species displayed a higher seasonal variability. Similarly, other features, such as shoot density, leaf surface, LAI, shoot weight and relative contributions of above‐ and below‐ground compartments, were less variable across seasons in P. oceanica than in the two other seagrasses, while leaf length showed the highest seasonal fluctuation in P. oceanica. As for biomass partitioning, C. nodosa showed a higher proportion of the below‐ground relative to above‐ground biomass (up to 90 %), with a distinct seasonality, whereas in P. oceanica the proportion of below‐ground biomass (around 80 %) was fairly constant during the year. We infer that in P. oceanica the seasonal forcing is probably buffered by the availability of internal resources stored permanently during the year in the below‐ground. In C. nodosa and Z. marina, instead, growth processes seem to be amplified by a greater influence of environmental factors.     

Optimal design of an equipment isolation system with nonlinear hysteretic behaviour

Vibration isolation is well recognized as an effective mitigation strategy for acceleration‐sensitive equipment subjected to earthquake. In the present paper, an equipment isolation system with nonlinear hysteretic behaviour is proposed and a methodology for the optimal design is developed. An integrable constitutive model, derived from the mathematical Duhem hysteresis operator, is adopted for the isolation system. The optimization procedure is defined through a dual‐criteria approach that involves a transmissibility criterion combined with an energy performance criterion: the former consists in limiting the absolute acceleration of the isolated equipment below an allowable threshold value; the latter, in maximizing the ratio between the energy dissipation due to hysteresis and the input energy to reduce the isolator displacements. The seismic effectiveness of the nonlinear hysteretic isolation system is numerically investigated under natural accelerograms with different frequency content and increasing levels of excitation. Both ground‐mounted and floor‐mounted equipment items are considered in the analyses; in the second case, the dynamic interaction between the equipment and its supporting structure is taken into account in the design of the isolation system, and its effects on the isolation performance and the structural response are discussed. Comparisons in terms of effectiveness and robustness with a linear isolation system with viscoelastic behaviour are eventually provided. Copyright © 2013 John Wiley & Sons, Ltd.     

The Sponge Community of a Semi-Submerged Mediterranean Cave

Abstract. The sponge fauna of a semi-submerged cave from the Tremiti Archipelago (Adriatic Sea) was studied, and its distribution was analyzed in relation to abiotic (water-movement and light gradients) and biotic (algae and anthozoan substrate cover) ecological factors. Fifty-five species of sponges were recorded. The number of species and the abundance values of sponges increase in the first part of the cave, then progressively decrease, with a sharp fall at the end of the cave. The quick disappearance of algae along the light gradient allows sponges to thrive in the first portion of the cave. The subsequent, progressive decrement of sponges could be the result of food depletion phenomena due to a long persistence of the water body in this long cavity. A high water-turbulence, due to the peculiar morphology of the cave and indicated by the recorded values of water-movement, occurs at the end of the cavity and probably determines the sharp decrement of sponges in the inner portion of the cave. This turbulence may also explain the absence of typical still-water cave species and probably affects the type of development (shape, overgrowth) of the sponges in the community.     

Frequency of debris flows and their relation with precipitation: A case study in the Central Alps, Italy

Debris flows are very important and widespread mass movements, and represent a remarkable geomorphological hazard. This research deals with debris flows in an alpine environment, studied using dendrogeomorphological dating techniques, outlining their relation with precipitation, and analysing possible changes in their frequency and intensity over time. The study area is the upper Valle del Gallo (Northern Italy), a typical high mountain environment dominated by mass wasting processes, where many debris-flow fans occupy the valley bottom. Dendrogeomorphological research was conducted on twelve of these fans and two channels located on slopes. Tree growth anomalies (abrasion scars, compression wood and abrupt growth changes) were used as dating methods. Two hundred and thirty nine debris debris-flow events between 1875 and 2003 were dated using 757 trees (Pinus montana Mill.). Analysis between dated events and precipitation suggests that debris flows in the study area could be triggered by 20–30 mm of rain concentrated in a few hours. The debris-flow frequency tends to increase gradually, but the highest value seems to have occurred in the period 1974–1983. This trend agrees with the historical occurrence of flooding events in Northern Italy as inferred by literature, and with similar studies conducted in the Swiss Alps. The results of this research are intended as a contribution for understanding the response of geomorphological processes to climatic changes.     

The Finero phlogopite-peridotite massif: an example of subduction-related metasomatism

The Finero peridotite massif is a harzburgite that suffered a dramatic metasomatic enrichment resulting in the pervasive presence of amphibole and phlogopite and in the sporadic occurrence of apatite and carbonate (dolomite)-bearing domains. Pyroxenite (websterite) dykes also contain phlogopite and amphibole, but are rare. Peridotite bulk-rock composition retained highly depleted major element characteristics, but was enriched in K, Rb, Ba, Sr, LREE (light rare earth elements) (La_N/Yb_N = 8–17) and depleted in Nb. It has high radiogenic Sr (⁸⁷Sr/⁸⁶Sr₍₂₇₀₎ = 0.7055–0.7093), low radiogenic Nd (ɛNd₍₂₇₀₎= −1 to −3) and EMII-like Pb isotopes. Two pyroxenite – peridotite sections examined in detail show the virtual absence of major and trace element gradients in the mineral phases. In both rock types, pyroxenes and olivines have the most unfertile major element composition observed in Ivrea peridotites, spinels are the richest in Cr, and amphibole is pargasite. Clinopyroxenes exhibit LREE-enriched patterns (La_N/Yb_N ∼16), negative Ti and Zr and generally positive Sr anomaly. Amphibole has similar characteristics, except a weak negative Sr anomaly, but incompatible element concentration ∼1.9 (Sr) to ∼7.9 (Ti) times higher than that of coexisting clinopyroxene. Marked geochemical gradients occur toward apatite and carbonate-bearing domains which are randomly distributed in both the sections examined. In these regions, pyroxenes and amphibole (edenite) are lower in mg## and higher in Na₂O, and spinels and phlogopite are richer in Cr₂O₃. Both the mineral assemblage and the incompatible trace element characteristics of the mineral phases recall the typical signatures of “carbonatite” metasomatism (HFSE depletion, Sr, LILE and LREE enrichment). Clinopyroxene has higher REE and Sr concentrations than amphibole (^amph/cpxD_REE,Sr = 0.7–0.9) and lower Ti and Zr concentrations. It is proposed that the petrographic and geochemical features observed at Finero are consistent with a subduction environment. The lack of chemical gradients between pyroxenite and peridotite is explained by a model where melts derived from an eclogite-facies slab infiltrate the overhanging harzburgitic mantle wedge and, because of the special thermal structure of subduction zones, become heated to the temperature of the peridotite. If the resulting temperature is above that of the incipient melting of the hydrous peridotite system, the slab-derived melt equilibrates with the harzburgite and a crystal mush consisting of harzburgite and a silica saturated, hydrous melt is formed. During cooling, the crystal mush crystallizes producing the observed sequence of mineral phases and their observed chemical characteristics. In this context pyroxenites are regions of higher concentration of the melt in equilibrium with the harzburgite and not passage-ways through which exotic melts percolated. Only negligible chemical gradients can appear as an effect of the crystallization process, which also accounts for the high amphibole/clinopyroxene incompatible trace element ratios. The major element refractory composition is explained by an initially high peridotite/melt ratio. The apatite, carbonate-bearing domains are the result of the presence of some CO₂ in the slab-derived melt. The CO₂/H₂O ratio in the peridotite mush increased by crystallization of hydrous phases (amphibole and phlogopite) locally resulting in the unmixing of a late carbonate fluid. The proposed scenario is consistent with subduction of probably Variscan age and with the occurrence of modal metasomatism before peridotite incorporation in the crust. Received: 20 July 1998 / Accepted: 28 October 1998     

Palynological dating (Arenig) of the sedimentary sequence overlying the Ishkarwaz Granite (upper Yarkhun valley, Chitral, Pakistan)

A sedimentary sequence overlying a granite pluton near Ishkarwaz (upper Yarkhun valley, Chitral, Pakistan; Karakorum Microplate) contains abundant, but poorly preserved, acritarchs probably referable to the late early Arenig-early late Arenig interval. The palynological assemblages of Karakorum show a marked similarity to the cold water Peri-Gondwana assemblages; i.e. to those of Li Jun's Arbusculidium-Coryphidium-Striatotheca 'Mediterranean' Bioprovince. Biogeographical and geological comparisons suggest that, before the accretion of Cimmerian microplates to the Eurasian continent, the Karakorum Microplate was located along the northern margin of Gondwana in a latitude intermediate between the Mediterranean region and South China (Yangtze Platform).