Shaking table tests of a full-scale flat-bottom manufactured steel silo filled with wheat: Main results on the fixed-base configuration

This paper reports on a series of shaking table tests on a full-scale flat-bottom steel silo filled with soft wheat, characterized by aspect ratio of around 0.9. The specimen was a 3.64-m diameter and 5.50-m high corrugated-wall cylindrical silo. Multiple sensors were used to monitor the static and dynamic response of the filled silo system, including accelerometers and pressure cells. Numerous unidirectional dynamic tests were performed consisting of random signals, sinusoidal inputs, and both artificial and real earthquake records. The objectives of this paper are (i) to provide a general overview of the whole experimental campaign and (ii) to present selected results obtained for the fixed-base configuration. The measured data were processed to assess the static pressures, the dynamic overpressures (related to the effective mass) and the accelerations of monitored points on the silo wall, and to identify the basic dynamic properties (fundamental frequency of vibration, damping ratio, dynamic amplification factors) of the filled silo. The main findings are discussed and compared with the predictions given by available theoretical models and code provisions. It is found that the fundamental frequency slightly decreases with increasing acceleration, while it slightly increases with increasing compaction of the granular material. For close-to-resonance input, the dynamic amplification (in terms of peak values of accelerations) increases along the height of the silo wall up to values of around 1.4 at the top surface of the solid content. The dynamic overpressures appear to increase with depth (differently from the EN1998-4 expectations), and to be proportional to the acceleration.     

Morphological effects of different channel‐forming discharges in a gravel‐bed river

The study analyses the morphological response of a gravel‐bed river to discharges of different magnitude (from moderate events that occur several times a year to a 12‐year flood) and so defines the range of formative discharges for single morphological units (channels, bars, islands) and a range of magnitude of morphological activity from the threshold discharges for gravel transport and minor bar modification up to flows causing major morphological changes. The study was conducted on the Tagliamento River, a large gravel‐bed river in north‐eastern Italy, using two different methods, analysis of aerial photographs and field observation of painted gravel particles. The available photographs (five flights from August 1997 to November 2002) and the two commissioned flights (June 2006 and April 2007) do not define periods with a single flood event, but the intervals are short enough (11 to 22 months) to have a limited number of flood events in each case. The fieldwork, which involved cross‐section survey, grain‐size analysis and observation of painted sediments, complemented the aerial surveys by allowing analysis of channel response to single flood events. Substantial morphological changes (e.g. bank erosion of several tens of metres up to more than 100 m) associated with flood events with a recurrence interval between 1·1 year and 12 years have been documented. Multiple forming discharges were defined based on the activity of different morphological units. Discharges equal to 20–50% of the bankfull discharge are formative for the channels, whereas the bankfull discharge (1·1 year flood in this case of the Tagliamento River) is formative for low bars. Larger floods, but still relatively frequent (with a recurrence interval less than five years), are required for full gravel transport on high bars and significant morphological changes of islands. Copyright © 2009 John Wiley & Sons, Ltd.     

The magmatic feeding system of El Reventador volcano (Sub-Andean zone,Ecuador) constrained by texture,mineralogy and thermobarometry of the 2002 erupted products

After a 26 years long quiescence El Reventador, an active volcano of the rear-arc zone of Ecuador, entered a new eruptive cycle which lasted from 3 November to mid December 2002. The initial sub-Plinian activity (VEI 4 with andesite pyroclastic falls and flows) shifted on 6 and 21 November to an effusive stage characterized by the emission of two lava flows (andesite to low-silica andesite Lava-1 and basaltic andesite Lava-2) containing abundant gabbro cumulates. The erupted products are medium to high-K calc-alkaline and were investigated with respect to major element oxides, mineral chemistry, texture and thermobarometry. Inferred pre-eruptive magmatic processes are dominated by the intrusion of a high-T mafic magma (possibly up to 1165 ± 15 °C) into an andesite reservoir, acting as magma mixing and trigger for the eruption. Before this refilling, the andesite magma chamber was characterized by water content of 5.3 ± 1.0%, high oxygen fugacity (> NNO + 2) and temperatures, in the upper and lower part of the reservoir, of 850 and 952 ± 65 °C respectively. Accurate amphibole-based barometry constrains the magma chamber depth between 8.2 and 11.3 km (± 2.2 km). The 6 October 2002 seismic swarm (hypocenters from 10 to 11 km) preceding El Reventador eruption, supports the intrusion of magmas at these depths. The widespread occurrence of disequilibrium features in most of the andesites (e.g. complex mineral zoning and phase overgrowths) indicates that convective self-mixing have been operating together with fractional crystallization (inferred from the cognate gabbro cumulates) before the injection of the basic magma which then gave rise to basaltic andesite and low-silica andesite hybrid layers. Magma mixing in the shallow chamber is inferred from the anomalous SiO₂–Al₂O₃ whole-rock pattern and strong olivine disequilibria. Both lavas show three types of amphibole breakdown rims mainly due to heating (mixing processes) and/or relatively slow syn-eruptive ascent rate (decompression) of the magmas. The lack of any disequilibrium textures in the pumices of the 3 November fall deposit suggest that pre-eruptive mixing did not occur in the roof zone of the chamber. A model of the subvolcanic feeding system of El Reventador, consistent with the intrusion of a low-Al₂O₃ crystal-rich basic magma into an already self-mixed andesite shallow reservoir, is here proposed. It is also inferred that before entering the shallow chamber the “basaltic” magma underwent a polybaric crystallization at deeper crustal levels.     

Broadband imaging via direct inversion of blended dispersed source array data

Although seismic sources typically consist of identical broadband units alone, no physical constraint dictates the use of only one kind of device. We propose an acquisition method that involves the simultaneous exploitation of multiple types of sources during seismic surveys. It is suggested to replace (or support) traditional broadband sources with several devices individually transmitting diverse and reduced frequency bands and covering together the entire temporal and spatial bandwidth of interest. Together, these devices represent a so‐called dispersed source array. As a consequence, the use of simpler sources becomes a practical proposition for seismic acquisition. In fact, the devices dedicated to the generation of the higher frequencies may be smaller and less powerful than the conventional sources, providing the acquisition system with increased operational flexibility and decreasing its environmental impact. Offshore, we can think of more manageable boats carrying air guns of different volumes or marine vibrators generating sweeps with different frequency ranges. On land, vibrator trucks of different sizes, specifically designed for the emission of particular frequency bands, are preferred. From a manufacturing point of view, such source units guarantee a more efficient acoustic energy transmission than today's complex broadband alternatives, relaxing the low‐ versus high‐frequency compromise. Furthermore, specific attention can be addressed to choose shot densities that are optimum for different devices according to their emitted bandwidth. In fact, since the sampling requirements depend on the maximum transmitted frequencies, the appropriate number of sources dedicated to the lower frequencies is relatively small, provided the signal‐to‐noise ratio requirements are met. Additionally, the method allows to rethink the way to address the ghost problem in marine seismic acquisition, permitting to tow different sources at different depths based on the devices' individual central frequencies. As a consequence, the destructive interference of the ghost notches, including the one at 0 Hz, is largely mitigated. Furthermore, blended acquisition (also known as simultaneous source acquisition) is part of the dispersed source array concept, improving the operational flexibility, cost efficiency, and signal‐to‐noise ratio. Based on theoretical considerations and numerical data examples, the advantages of this approach and its feasibility are demonstrated.     

Decoupled kinematics of two neighbouring permafrost creeping landforms in the Eastern Italian Alps

An overall acceleration of rock glacier displacement rates in the Alps has been observed in recent decades, with several cases of destabilization leading to potential geomorphological hazards. This behaviour has been attributed to the rising permafrost temperature, induced by atmospheric warming and regulated by thermo-hydrological processes. Landforms derived from the interaction of glacier remnants and permafrost are widespread in mountain areas, but are less studied and monitored than talus rock glaciers. This work presents a comparative study of a talus rock glacier and a glacial-permafrost composite landform (GPCL) in the Eastern Italian Alps. The two landforms are only 10 km apart, but have rather different elevation ranges and main slope aspects. The kinematics and ground thermal conditions were monitored from 2001 to 2015 along with geomorphological surveys, analyses of historical maps and remote sensing data. The dynamic behaviour of the rock glacier was similar to the majority of monitored rock glaciers in the Alps, with an acceleration after 2008 and a velocity peak in 2015. In contrast, the GPCL had a nearly unchanged displacement rate during the observation period. Statistical analyses of kinematic vs. nivo-meteorological variables revealed a dynamic decoupling of the two landforms after 2008 that corresponds with increased winter snow accumulation. Although the kinematics of both landforms respond to ground surface temperature variations, the collected evidence suggests a different reaction of ground surface temperature to variations in the precipitation regime. This different reaction is likely due to local topo-climatic conditions that affect snow redistribution by wind. The different reactions of the two systems to the same climatic forcing is likely a legacy of their different origins. GPCL dynamics result from interaction of permafrost and residual glacial dynamics that are associated with possible peculiarities in the internal/basal meltwater circulation, whose future response is uncertain and requires improved understanding. © 2019 John Wiley & Sons, Ltd. © 2019 John Wiley & Sons, Ltd.     

Coesite in a Muong Nong‐type tektite from Muong Phin,Laos: Description,formation, and survival

We examined 16 white opaque inclusions exposed on two polished slices of a Muong Nong‐type Australasian tektite from Muong Phin, Laos. The inclusions usually consist of a core, surrounded by a froth layer, and a quartz neoblast layer. The cores are composed primarily of a mixture of silica glass, coesite, and quartz in varying proportions. A thin (up to ~4 μm) layer of SiO₂‐poor glass enriched in FeO, MgO, CaO, Al₂O₃, and TiO₂ is observed as a bright halo in backscattered electron images around the quartz neoblasts and in places contains μm‐sized crystals, which may be Fe,Mg‐rich spinel. The distribution and textural relationships between the coesite‐bearing inclusions and the tektite matrix point to an in situ formation of the coesite due to an impact, rather than to infall, from a nearby impact, into tektite melt produced by the aerial burst of a bolide. The quartz neoblasts probably formed by crystallization of silica melt squeezed out of the inclusion core during the development of the froth layer. The bright halo may be the result of silica diffusing from the adjacent tektite melt into the growing quartz neoblasts. We propose that the survival of coesite was possible due to the froth layer that acted as a heat sink during bubble expansion and then as a thermal insulator.     

Three-Dimensional Mapping of Air Flow at an Urban Canyon Intersection

In this experimental work both qualitative (flow visualisation) and quantitative (laser Doppler anemometry) methods were applied in a wind tunnel in order to describe the complex three-dimensional flow field in a real environment (a street canyon intersection). The main aim was an examination of the mean flow, turbulence and flow pathlines characterising a complex three-dimensional urban location. The experiments highlighted the complexity of the observed flows, particularly in the upwind region of the intersection. In this complex and realistic situation some details of the upwind flow, such as the presence of two tall towers, play an important role in defining the flow field within the intersection, particularly at roof level. This effect is likely to have a strong influence on the mass exchange mechanism between the canopy flow and the air aloft, and therefore the distribution of pollutants. This strong interaction between the flows inside and outside the urban canopy is currently neglected in most state-of-the-art local scale dispersion models.     

Cooperative evolutionary algorithm for space trajectory optimization

A hybrid evolutionary algorithm which synergistically exploits differential evolution, genetic algorithms and particle swarm optimization, has been developed and applied to spacecraft trajectory optimization. The cooperative procedure runs the three basic algorithms in parallel, while letting the best individuals migrate to the other populations at prescribed intervals. Rendezvous problems and round-trip Earth–Mars missions have been considered. The results show that the hybrid algorithm has better performance compared to the basic algorithms that are employed. In particular, for the rendezvous problem, a 100% efficiency can be obtained both by differential evolution and the genetic algorithm only when particular strategies and parameter settings are adopted. On the other hand, the hybrid algorithm always attains the global optimum, even though nonoptimal strategies and parameter settings are adopted. Also the number of function evaluations, which must be performed to attain the optimum, is reduced when the hybrid algorithm is used. In the case of Earth–Mars missions, the hybrid algorithm is successfully employed to determine mission opportunities in a large search space.     

Radial growth change of temperate tree species in response to altered regional climate and air quality in the period 1901–2008

Both increasing and decreasing 20th century growth trends have been reported in forests throughout Europe, but only for few species and areas suitable modelling techniques have been used to distinguish individual tree growth (operating on a local scale) from growth change due to exogenous factors (operating on a broad geographical scale). This study relates for the first time observed growth changes, in terms of basal area increment (BAI) of dominant trees of pedunculate oak, common beech and Scots pine, in north-west European temperate lowland forests (Flanders) to climate, atmospheric CO₂ and tropospheric O₃ concentrations, N deposition, site quality and forest structure for more than a century (the period 1901?C2008), applying mixed models. Growth change during the 20th century is observed for oak (increasing growth) and beech (increasing growth until the 1960s, growth decline afterwards), but not for pine. It was possible to relate growth change of oak and beech to climate time series and N deposition trends. Adding time series for CO₂ and O₃ concentration did not significantly improve model results. For oak and beech a switch from positive to negative growth response with increasing nitrogen deposition throughout time is observed. Growth increase for oak is mainly determined by the interaction between growing season temperature and soil water recharge. It is reasonable to assume that the observed growth trend for oak will continue for as long as early season water availability is not compromised. The decreasing trend in summer relative air humidity observed since the 1960s in the study area can be a main cause of recent beech BAI decrease. A further growth decline of beech can be expected, independent of site quality.