Assessing rockfall susceptibility in steep and overhanging slopes using three-dimensional analysis of failure mechanisms

Rockfalls strongly influence the evolution of steep rocky landscapes and represent a significant hazard in mountainous areas. Defining the most probable future rockfall source areas is of primary importance for both geomorphological investigations and hazard assessment. Thus, a need exists to understand which areas of a steep cliff are more likely to be affected by a rockfall. An important analytical gap exists between regional rockfall susceptibility studies and block-specific geomechanical calculations. Here we present methods for quantifying rockfall susceptibility at the cliff scale, which is suitable for sub-regional hazard assessment (hundreds to thousands of square meters). Our methods use three-dimensional point clouds acquired by terrestrial laser scanning to quantify the fracture patterns and compute failure mechanisms for planar, wedge, and toppling failures on vertical and overhanging rock walls. As a part of this work, we developed a rockfall susceptibility index for each type of failure mechanism according to the interaction between the discontinuities and the local cliff orientation. The susceptibility for slope parallel exfoliation-type failures, which are generally hard to identify, is partly captured by planar and toppling susceptibility indexes. We tested the methods for detecting the most susceptible rockfall source areas on two famously steep landscapes, Yosemite Valley (California, USA) and the Drus in the Mont-Blanc massif (France). Our rockfall susceptibility models show good correspondence with active rockfall sources. The methods offer new tools for investigating rockfall hazard and improving our understanding of rockfall processes.     

Chronology of the Mediterranean sea-level highstand during the Last Interglacial: a critical review of the U/Th-dated deposits

Relative sea-level (RSL) evolution during Marine Isotopic Stage (MIS) 5 in the Mediterranean basin is still not fully understood despite a plethora of morphological, stratigraphic and geochronological studies carried out on highstand deposits of this area. In this review we assembled a database of 323 U/Th-dated samples (e.g. corals, molluscs, speleothems) which were used to chronologically constrain RSL evolution within MIS 5. The application of strict geochemical criteria to the U/Th samples indicates that only ~33% of data available for the Mediterranean Sea can be considered ‘reliable’. Most of these data (~65%) refer to the MIS 5e highstand, while only ~17% could be related to the MIS 5a. No attribution to MIS 5c can be unequivocally supported. Nevertheless, the resulting framework does not allow us to define a satisfactory RSL trend during the MIS 5e highstand and subsequent MIS 5 substages. Overall, the proposed selection of reliable/unreliable data would be useful for detecting areas where MIS 5 substage attributions are not supported by confident U/Th chronological data and thus the related reconstructions need to be revised. In this regard, the resulting framework calls for a reappraisal and re-examination of the Mediterranean records with advanced geochronological methodologies.     

A novel methodological approach for land subsidence prediction through data assimilation techniques

Computational Geosciences - Anthropogenic land subsidence can be evaluated and predicted by numerical models, which are often built over deterministic analyses. However, uncertainties and...     

New developments with design and construction of a thermal/vacuum qualified photogrammetric system

In the frame of the development of a photogrammetric system to be used in thermal/vacuum chambers at the European Space Research and Technology Centre (ESTEC) of European Space Agency (ESA) and other sites across Europe, the design of a network using micro-cameras was specified by ESA-ESTEC. A thermal/vacuum qualified photogrammetric system, which is able to work and acquire images in vacuum and at cryo-temperatures, was constructed by ESA-ESTEC Test Centre Division. The current system uses four space qualified one-mega pixel cameras and is able to measure large space structures in vacuum and at temperatures down to ?170 ^°C with a global accuracy better than 1 part per 100,000 in object space. Several tests aiming at the qualification of the sensors and system in terms of operation and accuracy have been carried out. Special measures have been developed and special attention has been taken into account specifically for the first application of the photogrammetric system. It is to verify the ESA’s Herschel Telescope Flight Model alignment positioning.     

The particle background of the <Emphasis Type="Italic">X-IFU</Emphasis> instrument

In this paper we are going to review the latest estimates for the particle background expected on the X-IFU instrument onboard of the ATHENA mission. The particle background is induced by two different particle populations: the so called “soft protons” and the Cosmic rays. The first component is composed of low energy particles (< 100s keV) that get funnelled by the mirrors towards the focal plane, losing part of their energy inside the filters and inducing background counts inside the instrument sensitivity band. The latter component is induced by high energy particles (> 100 MeV) that possess enough energy to cross the spacecraft and reach the detector from any direction, depositing a small fraction of their energy inside the instrument. Both these components are estimated using Monte Carlo simulations and the latest results are presented here.     

XMM-Newton observations of the isolated neutron star 1RXS J214303.7+065419/RBS1774

We report XMM-Newton observations of the isolated neutron star RBS1774 and confirm its membership as an XDINS. The X-ray spectrum is best fit with an absorbed blackbody with temperature kT=101 eV and absorption edge at 0.7 keV. No power law component is required. An absorption feature in the RGS data at 0.4 keV is not evident in the EPIC data, but it is not possible to resolve this inconsistency. The star is not seen in the UV OM data to m _AB ∼21. There is a sinusoidal variation in the X-ray flux at a period of 9.437 s with an amplitude of 4%. The age as determined from cooling and magnetic field decay arguments is 10⁵–10⁶ yr for a neutron star mass of 1.35–1.5 M_⊙.      

An instrument for commissioning the active and adaptive optics of modern telescopes: the Infrared Test Camera for the Large Binocular Telescope

We describe the design, integration, and operation of the infrared test cameras for the commissioning of the Large Binocular Telescope. The design and construction phase lasted slightly more than one year from February 2007 to April 2008 and was the result of a joint collaboration among INAF Osservatorio Astronomico di Bologna, Università di Bologna Dipartimento di Astronomia (Italy) and the Max-Planck-Institut für Astronomie (Heidelberg, Germany). Thereafter, the camera was delivered to the LBT Observatory (USA) for commissioning of the telescope active optics and, more recently, for commissioning of the first light adaptive optics.     

Omeonga—A possible large impact structure on the Eastern Kasai Province (D.R. Congo)?

Abstract– The Omeonga ring structure (D.R. Congo) shows a remarkable drainage pattern encircling an area up to 45 km wide and encompassing a central smoothed relief 20 km wide. This inner circular ridge is elevated about 70 m above the ring depression corresponding to the bed of the Unia River, which flows between the inner ridge and an outer irregular ridge. Landsat 7 ETM and ASTER DEM show that the structural characteristics resemble those of several wide impact structures known on Earth. Other geological modes of origin that could produce ring structures, such as magmatic activity, salt diapirism, and karst dissolution have been considered. However, after evaluating the regional stratigraphy, the distribution of volcanism, and morphometry, these processes seem to be rather unlikely. If of impact origin, the age of the Omeonga structure can be constrained to the Late Cretaceous‐Cenozoic according to the youngest units in which the ring structure was formed.