The Bam Earthquake of 26 December 2003

The devastating earthquake of 26 December 2003 claimed more than 26,000 lives in the city of Bam and surrounding towns and villages in Southeast Iran, and left the majority of the Bam population homeless. The reason for this tragedy was an unfortunate combination of geological, social and human circumstances. The causative fault practically traversed the city of Bam and the earthquake occurred at a shallow depth. The residential buildings were completely inappropriate for a seismic region, being extremely vulnerable to earthquake shaking, and the earthquake occurred early in the morning when most people were still sleeping. The damage pattern was nearly symmetric about a line 3 km to the west of the surface expression of the Bam fault, and the damage attenuated rapidly with distance from this line. The industrial facilities and the lifelines performed relatively well and experienced slight to moderate damage, but this might have been due to their distance from the earthquake epicentre. However, many of the qanat (traditional subterranean irrigation channels) chains that served the twin cities of Bam and Baravat collapsed. Emergency facilities (hospitals, police and fire stations), schools and the university were destroyed and/or heavily damaged during the earthquake. The geotechnical effects of the earthquake were not significant. There was little evidence that site response effects played a major role in the damage pattern in the city. There were no reports of liquefaction and only minor sliding activity took place during the event. A unique set of strong motion acceleration recordings were obtained at the Bam accelerograph station. The highest peak ground acceleration (nearly 1g) was recorded for the vertical component of the motion. However, the longitudinal component (fault-parallel motion in N–S direction) clearly had the largest energy flux, as well as the largest maximum velocity and displacement.     

Performance of Hybrid SCA-RF and HHO-RF Models for Predicting Backbreak in Open-Pit Mine Blasting Operations

Natural Resources Research - Backbreak is an adverse phenomenon in blasting operation, which can cause, among others, mine walls instability, falling down of machinery, drilling efficiency...     

On the relationship between MODIS Land Surface Temperature and topography in Iran

Land Surface Temperature (LST) is considered important in monitoring the energy flux between the land surface and atmosphere. Due to the diversity of topography in Iran and its effect on the climate diversity, we decided to study the effect of topography on the LST variations. To this end, the LST digital data derived from the observations of the MODIS Terra and Aqua were used. The results indicated that, during the daytime, from sea level up to a height of 400 meters, the LST increased, and then the temperature decreased with increasing altitude, and up to a height of 3000 meters, there was a strong correlation between the two. LST lapse rate was more during the daytime compared with that of the night time and it was more during the winter compared with the summer. LST lapse rate showed larger variability in diurnal cycle, but its monthly patterns were similar in different aspects. The aspect had substantial effect on LST inversion elevation. Furthermore, the inverse relationship between LST and slope was strong in slopes up to 20°.     

Tidal asymmetry in a tidal creek with mixed mainly semidiurnal tide,Bushehr Port,Persian Gulf

This study investigated the tidal asymmetry imposed by both the interaction of principal tides and the higher harmonics generated by distortions within a tidal creek network with mixed mainly semidiurnal tide in the Bushehr Port, Persian Gulf. Since velocity and water-level imposed by principal triad tides K₁-O₁-M₂ are in quadrature, duration asymmetries during a tidal period in this short, shallow inverse estuary should be manifest as skewed velocities. The principal tides produce periodic asymmetries including a strong ebb-dominance and a weak flood-dominance condition during spring and neap tides respectively. The higher harmonics induced by nonlinearities engender a flood-dominance condition where the convergence effects are higher than frictional effects, and an ebbdominance condition where intertidal storage are extended. Since the triad K₁-O₁-M₂ driven asymmetry is not overcome by higher harmonics close to the mouth, the periodic asymmetry dominates within the creek in which higher harmonics reinforce the weak flood-dominance (strong ebb-dominance) condition in the convergent channel (divergent area). Also, the maximum flood and the maximum ebb from all harmonic constituents occurred close to high water slack time during both spring and neap tides in this short creek. Since occational wetting of intertidal areas happened close to the high water (HW) time during spring tide, the water level flooded slowly close to the HW time of the spring tide.     

Seismic hazard analysis and local site effect of the 2017 Mw 7.3 Sarpol-e Zahab,Iran, earthquake

Natural Hazards - A strong earthquake occurred on November 12, 2017, in Sarpol-e Zahab city, western Iran, with the moment magnitude ( $$M_{{\text{w}}}$$ ) of 7.3 and a focal depth of...     

Scour and flow field around a spur dike in a 90° bend

Spur dike is an important element in river training that creates rapid variations in flow field, sediment transport and bed topography. The mechanism of flow and sediment transport in a channel bend is very complex, especially when a spur dike is constructed in a bend. Most of previous investigations on flow behavior and scour around spur dike were carried out in straight channels. In this paper results of experiments on flow field and scour around a spur dike in a 90 degree channel bend are presented. Sand with uniform grain size was used as the bed material. Experiments were conducted for different locations and different lengths of spur dikes at the bend with different values of discharge. The three dimensional flow fields around a spur dike were investigated. The maximum depth of scour was correlated to the Froude numbers, lengths and the locations of spur dike in the bend.     

Different Irrigation Methods and Their Comparisons Based on the Parametric Evaluation Method in Khosouyeh Dam Subbasin,Iran

Today, the world's population is rising dramatically, and in line with this increase in the population of food and agricultural products, there must be an increasing in the number of problems associated with this process of agricultural land. Then it is necessary to use the maximum potential of this lands that product maximum yield without any damage. To reach this objective, land suitability evaluation is the most important way that can reach human to this objective. The main objective of this research was to compare different irrigation methods based on a parametric evaluation system in an area of 221402 ha in the Khosouyeh Subbasin of the Fars province, in the south of Iran. After preparing land unit map, 37 points were selected for sampling. Soil properties were evaluated and analyzed. Suitability maps for drop and gravity irrigation were generated using GIS technique. The results revealed land suitability of 98.42% of the case study was classified as permanently not suitable (N₂) and 1.52% currently not suitable (N₁) for gravity irrigation. On the other hand, land suitability of 77.73% of the case study was classified as permanently not suitability (N₂), 6.05% currently not suitable (N₁), 12.43% marginally suitable (S₃) and 3.79% moderately suitable (S₂) for drop irrigation. The limiting factors for both kinds of drop and gravity irrigation are soil depth and slope of land.     

Skill Assessment of Copernicus Climate Change Service Seasonal Ensemble Precipitation Forecasts over Iran

Medium to long-term precipitation forecasting plays a pivotal role in water resource management and development of warning systems.Recently,the Copernicus Climate Change Service(C3S)database has been releasing monthly forecasts for lead times of up to three months for public use.This study evaluated the ensemble forecasts of three C3S models over the period 1993-2017 in Iran’s eight classified precipitation clusters for one-to three-month lead times.Probabilistic and non-probabilistic criteria were used for evaluation.Furthermore,the skill of selected models was analyzed in dry and wet periods in different precipitation clusters.The results indicated that the models performed best in western precipitation clusters,while in the northern humid cluster the models had negative skill scores.All models were better at forecasting upper-tercile events in dry seasons and lower-tercile events in wet seasons.Moreover,with increasing lead time,the forecast skill of the models worsened.In terms of forecasting in dry and wet years,the forecasts of the models were generally close to observations,albeit they underestimated several severe dry periods and overestimated a few wet periods.Moreover,the multi-model forecasts generated via multivariate regression of the forecasts of the three models yielded better results compared with those of individual models.In general,the ECMWF and UKMO models were found to be appropriate for one-month-ahead precipitation forecasting in most clusters of Iran.For the clusters considered in Iran and for the long-range system versions considered,the Météo France model had lower skill than the other models.     

Assessing issues associated with a time‐integrated fluvial fine sediment sampler

Collecting a representative time‐integrated sample of fluvial fine‐grained suspended sediment (<63 μm) is an important requirement for the understanding of environmental, geomorphological, and hydrological processes operating within watersheds. This study (a) characterized the hydrodynamic behaviour of a commonly used time‐integrated fine sediment sampler (TIFSS) using an acoustic Doppler velocimeter (ADV) in controlled laboratory conditions and (b) measured the mass collection efficiency (MCE) of the sampler by an acoustic Doppler current profiler under field conditions. The laboratory results indicated that the hydrodynamic evaluations associated with the original development of the TIFSS involved an underestimation of the inlet flow velocity of the sampler that results in a significant overestimation of the theoretical MCE. The ADV data illustrated that the ratio of the inlet flow velocity of the sampler to the ambient velocity was 87% and consequently, it can be assumed that a representative sample of the ambient fine suspended particles entered into the sampler. The field results showed that the particle size distribution of the sediment collected by the TIFSS was statistically similar to that for the ambient sediment in the Red River, Manitoba, Canada. The MCE of the TIFSS in the field trials appeared to be as low as 10%. Collecting a representative sample in the field was consistent with the previous findings that the TIFSS is a suitable sampler for the collection of a representative sample of sufficient mass (e.g., >1 g) for the investigation of the properties of fluvial fine‐grained suspended sediment. Hydrodynamic evaluation of the TIFSS under a wider range of hydraulic conditions is suggested to assess the performance of the sampler during high run‐off events.