Current Nature of the Kuroshio in the Vicinity of the Kii Peninsula

The Kuroshio flows very close to Cape Shionomisaki when it takes a straight path. The detailed observations of the Kuroshio were made both on board the R/V Seisui-maru of Mie University and on board the R/V Wakayama of the Wakayama Prefectural Fisheries Experimental Station on June 11–14, 1996. It was confirmed that the current zone of the Kuroshio touches the coast and bottom slope just off Cape Shionomiaki, and that the coastal water to the east of the cape was completely separated from that to the west. The relatively high sea level difference between Kushimoto and Uragami could be caused by this separation of the coastal waters when the Kuroshio takes a straight path. This flow is rather curious, as the geostrophic flow, which has a barotropic nature and touches the bottom, would be constrained to follow bottom contours due to the vorticity conservation law. The reason why the Kuroshio leaves the bottom slope to the east of Cape Shionomisaki is attributed to the high curvature of the bottom contours there: if the current were to follow the contours, the centrifugal term in the equation of motion would become large and comparablee to the Coriolis (or pressure gradient) term, and the geostrophic balance would be destroyed. This creates a current-shadow zone just to the east of the cape. As the reason why the current zone of the Kuroshio intrudes into the coastal region to the west of the cape, it is suggested that the Kii Bifurcation Current off the southwest coast of the Kii Peninsula, which is usually found when the Kuroshio takes the straight path, has the effect of drawing the Kuroshio water into the coastal region. The sea level difference between Kushimoto and Uragami is often used to monitor the flow pattern of the Kuroshio near the Kii Peninsula. It should be noted that Uragami is located in the current shadow zone, while Kushimoto lies in the region where the offshore Kuroshio water intrudes into the coastal region. The resulting large sea level difference indicates that the Kuroshio is flowing along the straight path.     

MicroRaman spectroscopy of anomalous planar microstructures in quartz from Mt. Oikeyama: Discovery of a probable impact crater in Japan

Abstract– Planar deformation features (PDFs) and planar fractures (PFs) have been found and confirmed by optical microscope observations and microRaman spectroscopy in quartz grains from Mt. Oikeyama (Akaishi Mountains, Central Japan), for which the semicircular topographic feature of the ridge suggests a crater formed by an impact event. According to the optical microscope observations, a low shock pressure (8–10 GPa) is estimated by the occurrence of basal or ω PDFs leading to lack of multiple sets of PDFs. In addition, a new type of planar microstructure was found in several quartz grains. The microRaman characteristics of PDFs in quartz from Mt. Oikeyama show the amorphous state indicating the presence of weak broad bands at 400 and 800 cm^?1 peak positions. These characteristics are indicative of PDFs that are limited to shocked quartz. This indicates an impact origin for distinct planar microstructures in quartz from Mt. Oikeyama.     

Experimental study on the bidirectional inelastic deformation capacity of U‐shaped steel dampers for seismic isolated buildings

Hysteretic dampers are used to dissipate earthquake‐induced energy in base‐isolated structures by acquiring inelastic deformations, rendering their hysteretic behavior of vital importance. The present paper focuses on investigating the behavior of U‐shaped steel dampers under bidirectional loading; this is significantly different from their corresponding uniaxial behavior. Two main sets of loading tests on full‐scale specimens are conducted in this regard: (i) quasi‐static tests with simple histories and (ii) dynamic tests with realistic loading histories. Based on the results obtained in the quasi‐static tests, an interaction curve that accounts for the reduction of the cyclic deformation capacity is proposed. However, the fidelity of this relation must be assessed under loading conditions similar to those of a seismically isolated structure subjected to an earthquake, which represents the goal of the second set of tests. The results of the dynamic tests validate the proposed interaction curve for estimating the deformation capacity of U‐shaped steel dampers under bidirectional loading. Copyright © 2015 John Wiley & Sons, Ltd.     

Effect of ocean acidification on coastal phytoplankton composition and accompanying organic nitrogen production

The effect of ocean acidification, caused by the increase in pCO₂ in seawater, on phytoplankton population and on related organic nitrogen production was experimentally examined by use of a natural coastal microbial population. pCO₂ and pH were controlled by aeration with air in which pCO₂ was at the current level (control), for which ambient air was used, and with air in which pCO₂ was ??800?? and ??1200?? ppm, in 500-L culture vessels. The experiment was continued for 15?days after addition of the inorganic nutrients such as nitrate, phosphate, and silicate. During most of the experimental period, a minor increase in phytoplankton biomass was noted, probably because of low irradiance, an increase in phytoplankton biomass was observed at the end of the experiment. Flow cytometric and microscopic observations revealed that this increase was because of Chrysochromulina sp. (Haptophyceae). The growth of Chrysochromulina sp. was most obvious in the control vessel, and tended to be obscured by increasing pCO₂ (decrease in pH), indicating the possibility that ocean acidification inhibits the growth of specific phytoplankton groups, for example Chrysochromulina sp. Production of particulate organic nitrogen (PON), determined by the ¹⁵N tracer method, also diminished under acidified conditions compared with that at the current level.     

Seismic radiation from dynamic coalescence, and the reconstruction of dynamic source parameters on a planar fault

The dynamic coalescence of two mode II cracks on a planar fault is simulated here using the elastodynamic boundary integral equation method. We focus on the complexity of the resultant slip rate and seismic radiation in the crack coalescence model (CCM) and on the reconstruction of a single crack model (SCM) that can reproduce the CCM waveforms from heterogeneous source parameters rather than coalescence. Simulation results reveal that localized higher slip rates are generated by coalescence as a result of stress interaction between the approaching crack tips. The synthesized seismic radiation exhibits a distinct coalescence phase that has striking similarities to stopping phases in the radiation and propagation properties. The corresponding SCM yields a singular increase in the stress drop distribution, which is accompanied by a sudden decrease in it across the point of coalescence in the CCM. This implies that the generation of high-frequency radiation is more efficient from coalescence than from stopping, although both phenomena exhibit the same strong  ω⁻²  -type displacement spectra.     

Sources and depositional processes of tsunami deposits: Analysis using foraminiferal tests and hydrodynamic verification

Foraminiferal tests are commonly found in tsunami deposits and provide evidence of transport of sea floor sediments, sometimes from source areas more than 100 m deep and several kilometers away. These data contribute to estimates of the physical properties of tsunami waves, such as their amplitude and period. The tractive force of tsunami waves is inversely proportional to the water depth at sediment source areas, whereas the horizontal sediment transport distance by tsunami waves is proportional to the wave period and amplitude. We derived formulas for the amplitudes and periods of tsunami waves as functions of water depth at the sediment source area and sediment transport distance based on foraminiferal assemblages in tsunami deposits. We applied these formulas to derive wave amplitudes and periods from data on tsunami deposits in previous studies. For some examples, estimated wave parameters were reasonable matches for the actual tsunamis, although other cases had improbably large values. Such inconsistencies probably reflect: (i) local amplification of tsunami waves by submarine topography, such as submarine canyons; and (ii) errors in estimated water depth at the sediment source area and sediment transport distance, which mainly derive from insufficient identification of foraminiferal tests.     

An overview of Task 6 of the Äspö Task Force: modelling groundwater and solute transport: improved understanding of radionuclide transport in fractured rock

An overview is presented of a 4-year study by the Äspö Task Force on Modelling of Groundwater Flow and Transport of Solutes, whose primary aim was to build a bridge between the approaches used for site characterisation (SC) and performance assessment (PA) associated with nuclear waste repositories. Eleven modelling teams representing six national radioactive waste organisations participated in eight modelling exercises whose objectives were: to assess simplifications used in PA models; to determine how, and to what extent, experimental tracer and flow experiments can constrain the range of parameters used in PA models; to support the design of SC programmes to assure that the results have optimal value for PA calculations; and to improve the understanding of site-specific flow and transport behaviour at different scales using SC models. The modelling tasks were concerned with flow and transport through single and multiple near-planar features on SC and PA timescales, including the diffusion of solutes into multiple immobile zones adjacent to fracture surfaces. In general, tracer tests provide only limited quantitative constraints on retention parameter values relevant to PA but nevertheless provide insight about the flow and transport processes, which is a key element of the bridge between SC and PA.     

A precise bathymetric map of the world’s deepest seafloor,Challenger Deep in the Mariana Trench

Data from three bathymetric surveys by R/V Kairei using a 12-kHz multibeam echosounder and differential GPS were used to create an improved topographic model of the Challenger Deep in the southwestern part of the Mariana Trench, which is known as the deepest seafloor in the world. The strike of most of the elongated structures related to plate bending accompanied by subduction of the Pacific plate is N70°E and is not parallel to the trench axis. The bending-related structures were formed by reactivation of seafloor spreading fabric. Challenger Deep consists of three en echelon depressions along the trench axis, each of which is 6–10 km long, about 2 km wide, and deeper than 10,850 m. The eastern depression is the deepest, with a depth of 10,920 ± 5 m.     

Paleomagnetism of the Middle–Late Jurassic to Cretaceous red beds from the Peninsular Thailand: Implications for collision tectonics

Jurassic to Cretaceous red sandstones were sampled at 33 sites from the Khlong Min and Lam Thap formations of the Trang Syncline (7.6°N, 99.6°E), the Peninsular Thailand. Rock magnetic experiments generally revealed hematite as a carrier of natural remanent magnetization. Stepwise thermal demagnetization isolates remanent components with unblocking temperatures of 620–690 °C. An easterly deflected declination (D = 31.1°, I = 12.2°, α₉₅ = 13.9°, N = 9, in stratigraphic coordinates) is observed as pre-folding remanent magnetization from North Trang Syncline, whereas westerly deflected declination (D = 342.8°, I = 22.3°, α₉₅ = 12.7°, N = 13 in geographic coordinates) appears in the post-folding remanent magnetization from West Trang Syncline. These observations suggest an occurrence of two opposite tectonic rotations in the Trang area, which as a part of Thai–Malay Peninsula received clockwise rotation after Jurassic together with Shan-Thai and Indochina blocks. Between the Late Cretaceous and Middle Miocene, this area as a part of southern Sundaland Block experienced up to 24.5° ± 11.5° counter-clockwise rotation with respect to South China Block. This post-Cretaceous tectonic rotation in Trang area is considered as a part of large scale counter-clockwise rotation experienced by the southern Sundaland Block (including the Peninsular Malaysia, Borneo and south Sulawesi areas) as a result of Australian Plate collision with southeast Asia. Within the framework of Sundaland Block, the northern boundary of counter-clockwise rotated zone lies between the Trang area and the Khorat Basin.