Reliability analysis of shallow foundations in reference to design codes development

In this study, FORM analysis is carried out for shallow foundation of a typical building in order to evaluate relative magnitude of uncertainties involved in the force and the resistance sides. The distinguished feature of this study is to take into account the uncertainty of the earthquake force as much as possible. Tthis is because, the seismic design dominates major part of structural design in Japan, and without referring to this problem, no useful information of practical value is gained. The results of the FORM analysis exhibited the reliability index values between 2.0 to 3.5, which is considered to be in a reasonable range. Since the 50 year maximum earthquake force is considered in the reliability calculation, calculated reliability index values are for the period of 50 years. The sensitivity factor obtained in a case more realistic ground variability is taken into account exhibited values not very different from those obtained in the upper structures.     

Transit time evaluation using a chloride concentration input step shift after forest cutting in a Japanese headwater catchment

Mean transit times were estimated for a small headwater catchment in Japan (the Fukuroyamasawa Experimental Watershed) using the step shift in input chloride (Cl^?) concentrations that occurred immediately after an episode of forest clear‐cutting. Measured Cl^? concentrations in stream water began to decrease immediately after clear‐cutting, and this trend continued for 6 years. Before clear‐cutting, the input Cl^? concentrations were controlled by wet and dry deposition processes, and most of the dry Cl^? deposition was collected by the forest canopy and reached the ground as throughfall and stemflow. After clear‐cutting, dry deposition was no longer collected by the canopy in this way, thus causing a sharp decrease in input Cl^? concentrations. By comparing measured Cl^? concentrations in stream water with estimates based on the input and evaporative Cl^? concentrations, it was shown that the decrease in stream water Cl^? concentrations was caused mainly by this step shift in the Cl^? input. It was proposed that the change in Cl^? concentrations after forest cutting could be used to represent the replacement of ‘old’ water that existed before cutting by ‘new’ water that was supplied after cutting. The breakthrough curve for the new water fraction gave an approximately exponential distribution of transit times in flow‐corrected time. The mean flow‐corrected transit time was estimated as 1068 days (runoff: 3497 mm). It was therefore concluded that the step change in input Cl^? concentrations immediately following forest clear‐cutting could be successfully used to estimate transit times for the entire catchment. Copyright © 2009 John Wiley & Sons, Ltd.     

ANNUAL CHANGES IN PLASMA LEVELS OF CORTISOL AND SEX STEROID HORMONES IN MALE RAINBOW TROUT, ONCORHYNCHUS MYKISS

The profiles of cortisol, testosterone, ll-ketotestosterone and 17α， 20β- dihydroxy-4-pregnene-3-one in mule rainbow trout reared under constant water temperature and natural photoperiod were determined by radioimmunoassay. Gonads of male rainbow trout reached maturity when the fish were two years old. Changes in the plasma levels of both sex steroid hormones and cortisol were closely related to the GSI. Plasma levels of testosterone, 11-ketotestostemne and 17a, 2013-dihydroxy 4-pregnene-3-one showed a clear peak in the annual breeding season, when the GSI reached their maxima. Plasma cortisol levels also showed clearly seasonal changes in both two- and three-year-old fish. The results suggest that the elevated plasma levels of cortisol may not just be due to stresses during the breeding season but have certain physiological functions in the reproduction of rainbow trout.     

Population dynamics of phytoplankton, heterotrophic bacteria, and viruses during the spring bloom in the western subarctic Pacific

We characterized the community composition of phytoplankton in the western subarctic Pacific from the pre-bloom to the decline phase of the spring bloom with special reference to decreases in the silicic acid concentration in surface waters as an index for diatom bloom development. Furthermore, responses of heterotrophic bacteria and viruses to the spring bloom were also concomitantly investigated. Under pre-bloom conditions when nutrients were abundant but the surface mixed layer depth was relatively deep, chlorophyll (Chl) a concentrations were consistently low and green algae (chlorophytes and prasinophytes), cryptophytes, and diatoms were predominant in the phytoplankton assemblages as estimated by algal pigment signatures. Together with the shallowing of the mixed layer depth and the decrease in silicic acid concentration, diatoms bloomed remarkably in the Oyashio region, though the magnitude of the bloom in the Kuroshio-Oyashio transition (hereafter Transition) region was relatively small. A total of 77 diatom species were identified, with the bloom-forming diatoms mainly consisting of Thalassiosira, Chaetoceros, and Fragilariopsis species. It has become evident that the carotenoid fucoxanthin can serve as a strong indicator of the diatom carbon biomass during the spring diatom bloom. Differences in the species richness of diatoms among stations generally enabled us to separate the Oyashio bloom stations from the Transition and the Oyashio pre-bloom stations. Relatively high values of the Shannon-Wiener index for the diatom species were also maintained during the Oyashio bloom, indicating that a wide variety of species then shared dominance. In the decline phase of the Oyashio bloom when surface nutrient concentrations decreased, senescent diatom cells increased, as inferred from the levels of chlorophyllide a. Although the cell density of heterotrophic bacteria changed little with the development of the diatom bloom, viral abundance increased toward the end of the bloom, suggesting an increased likelihood of mortality among organisms including diatoms resulting from viral infection. This is the first report on the microbial trophodynamics, including viruses, during the spring diatom bloom in the western subarctic Pacific.     

Analysis of suspended sediment yields after low impact forest harvesting

Disturbances to forest catchments have profound effects on the environment of headwater streams and have an impact on suspended sediment (SS) management. Forest harvesting is a dominant factor in increasing SS yields. Road construction, skidder activity and ploughing associated with harvesting cause serious soil disturbance that results in SS increases. However, few studies have shown whether harvesting itself increases SS yields. This study examined how harvesting influenced SS yields in a steep forested area. During harvesting, soil surface disturbance was prevented as much as possible by using skyline logging treatments and piling branches and leaves at selected locations in the watershed. Using these methods, the representative SS rating curve did not change significantly after harvesting. The results also show that the characteristics of SS transport were related to the SS source area, and reveal that the riparian zone/stream bank was a dominant SS source area at the study site. Annual SS yields did not increase despite increasing annual water yields after harvesting. The limited water capacity of the soil at the study site likely led to only slight differences in pre‐ and post‐harvest water discharge from heavy rainfall events. Most SS was transported during heavy rainfall events, and increases in SS yields were not detected after harvesting. We concluded that it is possible to prevent post‐harvest SS increases by performing careful, low‐impact harvesting procedures. Copyright © 2007 John Wiley & Sons, Ltd.     

Aeolian dust experiment on climate impact: An overview of Japan–China joint project ADEC

The Aeolian Dust Experiment on Climate Impact (ADEC) was initiated in April 2000 as a joint five-year Japan–China project. The goal was to understand the impact of aeolian dust on climate via radiative forcing (RF). Field experiments and numerical simulations were conducted from the source regions in northwestern China to the downwind region in Japan in order to understand wind erosion processes temporal and spatial distribution of dust during their long-range transportation chemical, physical, and optical properties of dust and the direct effect of radiative forcing due to dust. For this, three intensive observation periods (IOP) were conducted from April 2002 to April 2004.The in situ and network observation results are summarized as follows: (1) In situ observations of the wind erosion process revealed that the vertical profile of moving sand has a clear size dependency with height and saltation flux and that threshold wind velocity is dependent on soil moisture. Results also demonstrated that saltation flux is strongly dependent on the parent soil size distribution of the desert surface. (2) Both lidar observations and model simulations revealed a multiple dust layer in East Asia. A numerical simulation of a chemical transport model, CFORS, illustrated the elevated dust layer from the Taklimakan Desert and the lower dust layer from the Gobi Desert. The global-scale dust model, MASINGAR, also simulated the dust layer in the middle to upper free troposphere in East Asia, which originated from North Africa and the Middle East during a dust storm in March 2003. Raman lidar observations at Tsukuba, Japan, found the ice cloud associated with the dust layer at an altitude of 6 to 9 km. Analysis from lidar and the radio-sonde observation suggested that the Asian dust acted as ice nuclei at the ice-saturated region. These results suggest the importance of dust's climate impact via the indirect effect of radiative forcing due to the activation of dust into ice nuclei. (3) Studies on the aerosol concentration indicated that size distributions of aerosols in downwind regions have bimodal peaks. One peak was in the submicron range and the other in the supermicron range. The main soluble components of the supermicron peak were Na⁺, Ca²⁺, NO₃⁻, and Cl⁻. In the downwind region in Japan, the dust, sea salt, and a mixture of the two were found to be dominant in coarse particles in the mixed boundary layer. (4) Observation of the optical properties of dust by sky-radiometer, particle shoot absorption photometer (PSAP), and Nephelometer indicated that unpolluted dust at source region has a weaker absorption than originally believed.A sensitivity experiment of direct RF by dust indicated that single scattering albedo is the most important of the optical properties of dust and that the sensitivity of instantaneous RF in the shortwave region at the top of the atmosphere to the refractive index strongly depends on surface albedo. A global scale dust model, MASINGAR, was used for evaluation of direct RF due to dust. The results indicated the global mean RF at the top and the bottom of the atmosphere were − 0.46 and − 2.13 W m^− 2 with cloud and were almost half of the RF with cloud-free condition.     

Mineral Components and Anti-oxidant Activities of Tropical Seaweeds

Seaweeds are known to hold substances of high nutritional value; they are the richest resources of minerals important to the biochemical reactions in the human body. Seaweeds also hold non-nutrient compounds like dietary fiber and polyphenols. However, there is not enough information on the mineral compounds of tropical seaweeds. Also we are interested in the antioxidant activities of seaweeds, especially those in the tropical area. In this study, Indonesian green, brown and red algae were used as experimental materials with their mineral components analyzed by using an atomic absorption spectrophotometer. The catechins and flavonoids of these seaweeds were extracted with methanol and analyzed by high performance liquid chromatography （HPLC） ; the anti-oxidant activities of these seaweeds were evaluated in a fish oil emulsion system. The mineral components of tropical seaweeds are dominated by calcium, potassium and sodium, as well as small amounts of copper, iron and zinc. A green alga usually contains epigallocatechin, gallocatechin, epigallocatechin gallate and catechin. However, catechin and its isomers are not found in some green and red algae. In the presence of a ferrous ion catalyst, all the methanol extracts from the seaweeds show significantly lower peroxide values of the emulsion than the control, and that of a green alga shows the strongest anti-oxidant extract of this alga, which is significantly different from activity. The highest chelation on ferrous ions is also found in the the other methanol extracts in both 3 and 24 h incubations.     

Estimation of vertical profiles of leaf drying times after daytime rainfall within a Bornean tropical rainforest

South‐east Asian Bornean tropical rainforests have large and complex canopy structures. To clarify how forest structure affects wet‐canopy evaporation, it is necessary to consider wet‐canopy evaporation processes within the forest canopy, such as vertical profiles of canopy drying time. In a previous study a method was proposed that utilizes sap flow measurements to estimate canopy drying time after rainfall (CDTobs) during daytime. In this present study, the method was applied to estimations of the vertical variations in CDTobs in 11 individual trees of various heights, ranging from 2·7 m to 53 m. The study derived vertical profiles and showed that the lengths of CDTobs in lower canopy trees were 2–4 h longer than those in the upper canopy trees. The new method for CDTobs profiles presented in this study, which is available for validation of multi‐layer biosphere‐atmospheric models, is a useful illustration for clarifying wet‐canopy evaporation processes in tropical rainforests. Copyright © 2008 John Wiley & Sons, Ltd.     

High pressure phase equilibria in the system CaTiO3-CaSiO3: stability of perovskite solid solutions

Phase relations in the system CaTiO₃-CaSiO₃ were experimentally examined at 5.3–14.7 GPa and 1200–1600 °C with a 6–8 type multianvil apparatus. As pressure increases, stability field of perovskite solid solution extends from CaTiO₃ to CaSiO₃, and the perovskite becomes stable for the entire composition range above about 12.3 GPa. The stability field of Ca(Ti_1?X, Si_X)₂O₅ (0.78<x≦1) titanite solid solution +Ca₂SiO₄ larnite exists in the CaSiO₃-rich composition range at 9.3–12.3 GPa and 1200 °C. Perovskite solid solutions containing CaSiO₃ component of 0 to 66 mol% could be quenched to 1 atm. The composition-molar volume relationship of perovskite solid solution showed that molar volume of perovskite solid solution linearly reduces from the value of CaTiO₃ to that of CaSiO₃.