Preparation of a New Geological Survey of Japan Geochemical Reference Material: Coral JCp-1

A new geochemical reference material, coral Porites sp. JCp-1 has been prepared by the Geological Survey of Japan (GSJ). Provisional values for twenty one major, minor and trace elements are presented. The homogeneity tests showed that all elements studied are considered to be homogeneously distributed.     

Experimental study of the alteration process of labradorite in acid hydrothermal solutions

Labradorite was altered artificially by HC1 solution ranging from M = 1 to M = 0.003 at 245 and 230°C. The products of alteration were examined by X-ray diffraction, electron microscopy, electron diffraction, infrared spectroscopy and the electron microprobe and the solution was analyzed chemically.Amorphous silica only was formed in solutions with M_HCl = 1 and M_HCl = 0.3. In a solution with M_HCl = 0.2, amorphous silica was initially formed, later dissolved and replaced by kaolinite. A mixture of microcrystalline boehmite and amorphous aluminosilicate was formed, altering to kaolinite in solutions with M_HCl = 0.1 and 0.3. Small amounts of kaolinite were initially formed but the alteration soon stopped in solution with M_HCl = 0.003. Relationships between the alteration processes and pH of the solutions can be roughly explained by using solubility diagrams assuming the congruent dissolution of labradorite and precipitation of the products in partial equilibrium. However, these assumptions are not valid with strongly acid solutions.The rate of dissolution of labradorite is controlled not only by its surface area, but also by the diffusion of matter through the layer of alteration products.     

Re-Os geochronology of the Iimori Besshi-type massive sulfide deposit in the Sanbagawa metamorphic belt, Japan

Besshi-type Cu deposits are strata-bound volcanogenic massive sulfide deposits usually associated with mafic volcanic rocks or their metamorphic equivalents. Although there are numerous Besshi-type deposits in the Sanbagawa metamorphic belt, Japan, their tectonic settings and depositional environments remain controversial because of a lack of depositional age constraints. We report Re-Os data for the Iimori deposit, one of the largest Besshi-type deposits in western Kii Peninsula, in order to examine the robustness of the Re-Os isotope system for dating sulfide minerals in the high-P/T metamorphic belt and to elucidate the primary depositional environment of the Iimori sulfide ores. An 11-point Re-Os isochron plot yields an age of 156.8 ± 3.6 Ma. As this Re-Os isochron age is significantly older than the timing of the Sanbagawa peak metamorphism (110-120 or ∼90 Ma) and a well-defined isochron was obtained, the Re-Os age determined here is most likely the primary depositional age. Despite high-grade metamorphism at up to 520 ± 25 °C and 8-9.5 kbar, the Re-Os isotope system of the Iimori sulfides was not disturbed. Hence, we consider that the whole-rock Re-Os closure temperature for the Iimori sulfide ores was probably higher than 500 °C. As the accretion age of the Sanbagawa metamorphic belt is considered to be 120-130 or 65-90 Ma on the basis of radiolarian and radiometric ages, we estimated the time from the Iimori sulfide deposition on the paleo-seafloor to its accretion at the convergent plate boundary to be greater than 25 Myr. Consequently, the depositional environment of the Iimori sulfide ores was not in the marginal sea, but was truly pelagic.     

Anomalous thermal expansion in spinel MgAl2O4

The accurate measurement of thermal expansion in spinel MgAl₂O₄ over a temperature range between 30° C and 900° C has revealed an anomalous behaviour indicating a possible presence of a second order phase transition at 660° C.     

Search for precursors of the 1974 Izu-Hanto-oki earthquake,Japan

Summary Premonitory changes in seismic wave velocity and regional seismicity were successfully detected for the Izu-Hanto-oki, Japan, earthquake of 1974,M=6.9. Premonitory variation in gushing rate of hot springs, being consistent with the results of the seismological studies, suggests that the dry dilatancy model is favorable for the pre-seismic process of the present earthquake. The precursor time observed 9±1.5 years is in fairly good agreement with current magnitude-precursor time relations. The longer axis of the anomalous area is three times as large as the linear dimension of the fracture zone. Absence of significant pre-seismic upheaval of the crust seems to be attributed to the strike-slip nature of the focal mechanism.     

Viscosity of peridotite liquid up to 13 GPa: Implications for magma ocean viscosities

The viscosity of synthetic peridotite liquid has been investigated at high pressures using in-situ falling sphere viscometry by combining a multi-anvil technique with synchrotron radiation. We used a newly designed capsule containing a small recessed reservoir outside of the hot spot of the heater, in which a viscosity marker sphere is embedded in a forsterite + enstatite mixture having a higher solidus temperature than the peridotite. This experimental setup prevents spheres from falling before a stable temperature above the liquidus is established and thus avoids difficulties in evaluating viscosities from velocities of spheres falling through a partially molten sample.

Experiments have been performed between 2.8 and 13 GPa at temperatures ranging from 2043 to 2523 K. Measured viscosities range from 0.019 (± 0.004) to 0.13 (± 0.02) Pa s. At constant temperature, viscosity increases with increasing pressure up to  8.5 GPa but then decreases between  8.5 and 13 GPa. The change in the pressure dependence of viscosity is likely associated with structural changes of the liquid that occur upon compression. By combining our results with recently published 0.1 MPa peridotite liquid viscosities [D.B. Dingwell, C. Courtial, D. Giordano, A. Nichols, Viscosity of peridotite liquid, Earth Planet. Sci. Lett. 226 (2004) 127–138.], the experimental data can be described by a non-Arrhenian, empirical Vogel-Fulcher-Tamman equation, which has been modified by adding a term to account for the observed pressure dependence of viscosity. This equation reproduces measured viscosities to within 0.08 log₁₀-units on average. We use this model to calculate viscosities of a peridotitic magma ocean along a liquid adiabat to a depth of  400 km and discuss possible effects on viscosity at greater pressures and temperatures than experimentally investigated.     

Effects of inertial and kinematic interaction on seismic behavior of pile with embedded foundation

Effects of inertial and kinematic forces on pile stresses are studied based on large shaking table tests on pile-structure models with a foundation embedded in dry and liquefiable sand deposits. The test results show that, if the natural period of the superstructure, T_b, is less than that of the ground, T_g, the ground displacement tends to be in phase with the inertial force from the superstructure, increasing the shear force transmitted to the pile. In contrast, if T_b is greater than T_g, the ground displacement tends to be out of phase with the inertial force, restraining the pile stress from increasing. With the effects of earth pressures on the embedded foundation and pile incorporated in, pseudo-static analysis is conducted to estimate maximum moment distribution in pile. It is assumed that the maximum moment is equal to the sum of the two stresses caused by the inertial and kinematic effects if T_b<T_g or the square root of the sum of the squares of the two if T_b>T_g. The estimated pile stresses are in good agreement with the observed ones regardless of the occurrence of soil liquefaction.     

Chemical characteristics of chromian spinel in plutonic rocks: Implications for deep magma processes and discrimination of tectonic setting

We summarize chemical characteristics of chromian spinels from ultramafic to mafic plutonic rocks (lherzolites, harzburgites, dunites, wehrlites, troctolites, olivine gabbros) with regard to three tectonic settings (mid‐ocean ridge, arc, oceanic hotspot). The chemical range of spinels is distinguishable between the three settings in terms of Cr# (= Cr/(Cr + Al) atomic ratio) and Ti content. The relationships are almost parallel with those of chromian spinels in volcanic rocks, but the Ti content is slightly lower in plutonics than in volcanics at a given tectonic environment. The Cr# of spinels in plutonic rocks is highly diverse; its ranges overlap between the three settings, but extend to higher values (up to 0.8) in arc and oceanic hotspot environments. The Ti content of spinels in plutonics increases, for a given lithology, from the arc to oceanic hotspot settings by mid‐ocean ridge on average. This chemical diversity is consistent with that of erupted magmas from the three settings. If we systematically know the chemistry of chromian spinels from a series of plutonic rocks, we can estimate their tectonic environments of formation. The spinel chemistry is especially useful in dunitic rocks, in which chromian spinel is the only discriminating mineral. Applying this, discordant dunites cutting mantle peridotites were possibly precipitated from arc‐related magmas in the Oman ophiolite, and from an intraplate tholeiite in the Lizard ophiolite, Cornwall.     

A Late Cretaceous mammalian dentary from the Ashizawa Formation (Futaba Group), Fukushima,northeastern Japan

A mammalian dentary discovered in the Coniacian Ashizawa Formation (Fukushima, northeastern Japan) is described. The specimen is a fragment of the horizontal ramus of a left edentulous dentary with five alveoli, the distal four of which are plugged with broken roots. Based on the morphologies of the dentary and the roots, it is considered to be of a therian mammal. This constitutes the first discovery of a Mesozoic mammal in northeastern Japan and highlights the potential for future mammal discoveries in the Cretaceous System in northeastern Japan, which will be significant for disclosure of the mammalian faunal evolution in East Asia during the Late Cretaceous.