Anglo-Saxon animal husbandry techniques revealed though isotope and chemical variations in cattle teeth

The Sr concentration and isotope composition of tooth enamel from domesticated animals from two neighbouring Anglo-Saxon settlements, at Empingham (6–7th century) and Ketton (10–12th century) in Rutland, central England, are compared both with each other, and with associated human populations. Data from the Empingham II site form discrete fields in Sr concentration and isotope composition space for cattle, pig and sheep with a partial overlap of the human and pig fields. By contrast there is significant overlap in all the animal and human data fields from the Ketton site. The differences in data distribution between the two sites are attributed to animal husbandry techniques, as the surface geology of the two areas is very similar, implying geological factors are an unlikely cause of the difference. It is suggested that the grazing and feeding patterns of animals at the Empingham II site were controlled and restricted, whereas at the Ketton site the animals grazed and foraged freely over a common area.     

A coupling of mixed and continuous Galerkin finite element methods for poroelasticity II: the discrete-in-time case

In this paper, we formulate a finite element procedure for approximating the coupled fluid and mechanics in Biot’s consolidation model of poroelasticity. Here, we approximate the pressure by a mixed finite element method and the displacements by a Galerkin method. Theoretical convergence error estimates are derived in a discrete-in-time setting. Of particular interest is the case when the lowest-order Raviart–Thomas approximating space or cell-centered finite differences are used in the mixed formulation and continuous piecewise linear approximations are used for displacements. This approach appears to be the one most frequently applied to existing reservoir engineering simulators.     

A coupling of mixed and continuous Galerkin finite element methods for poroelasticity I: the continuous in time case

In this paper, we formulate a finite element procedure for approximating the coupled fluid and mechanics in Biot’s consolidation model of poroelasticity. Here, we approximate the pressure by a mixed finite element method and the displacements by a Galerkin method. Theoretical convergence error estimates are derived in a continuous in-time setting for a strictly positive constrained specific storage coefficient. Of particular interest is the case when the lowest-order Raviart–Thomas approximating space or cell-centered finite differences are used in the mixed formulation, and continuous piecewise linear approximations are used for displacements. This approach appears to be the one most frequently applied to existing reservoir engineering simulators.     

Use of annular flumes to determine the influence of current velocity and bivalves on material flux at the sediment-water interface

A benthic annular flume for both laboratory and in situ deployment on intertidal mudflats is described. The flume provides a means of quantifying material flux (i.e., biodeposition of suspended particulates, sediment resuspension, nutrients, oxygen, and contaminants) across the sediment-water interface in relation to changes in current velocity and benthic community structure and/or population density of key macrofauna species. Flume experiments have investigated the impact of the infaunal bivalveMacoma balthica and the epifaunal bivalveMytilus edulis on seston and sediment flux at the sediment-water interface. The bioturbatorMacoma was found to increase the sediment resuspension and/or erodability by 4-fold, at densities similar to those recorded at the Skeffling mudflat (Humber estuary) (i.e., >1000 individuals m^?2). There was a significant correlation between sediment resuspension andMacoma density (r=0.99; p<0.001), which supported previous in situ field observations indicating bioturbation byMacoma enhanced sediment erodability. Biodeposition rates (g m^?2 h¹) ofMytilus edulis andCerastoderma edule were quantified and related to changes in population density in a mussel bed (Cleethorpes, Humber estuary). Biodeposition rates were up to 40-times the natural sedimentation rates. At the highest mussel bed densities (i.e., 50–100% cover or >1400 mussels m^?2) the physical presence of this epifaunal bivalve on the sediment surface reduced erosion by 10-fold. The shift from net biodeposition to net erosion occurred at current velocities of 20–25 cm s^?1. These results demonstrate that infaunal and epifaunal bivalves can have a significant impact on seston flux or sediment deposition and on sediment resuspension or erodability in estuaries where there are extensive mudflats.     

Stability of power-law discs — II. The global spiral modes

This paper reports on the in-plane normal modes in the self-consistent and the cut-out power-law discs. Although the cut-out discs are remarkably stable to bisymmetric perturbations, they are very susceptible to one-armed modes. For this harmonic, there is no inner Lindblad resonance, thus removing a powerful stabilizing influence. A physical mechanism for the generation of the one-armed instabilities is put forward. Incoming trailing waves are reflected as leading waves at the inner cut-out, thus completing the feedback for the swing-amplifier. Growing three-armed and four-armed modes occur only at very low temperatures. However, neutral m  = 3 and m  = 4 modes are possible at higher temperatures for some discs. The rotation curve index β has a marked effect on stability. For all azimuthal wavenumbers, any unstable modes persist to higher temperatures and grow more vigorously if the rotation curve is rising (β < 0) than if the rotation curve is falling (β > 0). If the central regions or outer parts of the disc are carved out more abruptly, any instabilities become more virulent. The self-consistent power-law discs possess a number of unusual stability properties. There is no natural time-scale in the self-consistent disc. If a mode is admitted at some pattern speed and growth rate, then it must be present at all pattern speeds and growth rates. Our analysis — although falling short of a complete proof — suggests that such a two-dimensional continuum of non-axisymmetric modes does not occur and that the self-consistent power-law discs admit no global non-axisymmetric normal modes whatsoever. Without reflecting boundaries or cut-outs, there is no resonant cavity and no possibility of unstable growing modes. The self-consistent power-law discs certainly admit equi-angular spirals as neutral modes, together with a one-dimensional continuum of growing axisymmetric modes.     

Geochemistry of high-grade eclogites and metarodingites from the Central Alps

Analyses for major, minor, and trace element contents of metamorphosed, variably rodingitized mafic rocks demonstrate substantial removal of Na and as much as three-fold gains in Ca as a consequence of rodingitization. Modest declines in Si and Fe can be explained in terms of dilution effects. Losses in K and Ba do not correlate with Ca% and may have been caused by an alteration process not related to the rodingitization. The Ca-metasomatism was not accompanied by a gain in Sr. The relative contents of Ti, Zr, Hf, Y, Co, Sc, and heavy REE show no readily detectable changes, despite the rodingitization (±other alteration) and subsequent metamorphisms, namely, eclogite facies (T800° C, P 20kbar) followed by amphibolite facies, sillimanite zone. Protoliths were tholeiitic basalt or diabase, and gabbro, with trace element contents indicative of a spreading center origin. Trace element and REE patterns indicate low-pressure fractionation of this magma, with plagioclase stable. This petrogenesis is consistent with prior conclusions on the shallow crustal origin of the protolith of the eclogite-metarodingite-garnet lherzolite suite in the Cima Lunga-Adula nappe, Central Alps. Based on their bulk chemical composition, the mafic rocks in this suite could be the equivalent of Mesozoic ophiolitic rocks in the more external parts of the Alps.     

57Fe NCR of Fe phases in “magnetic cassiterites”

A pyralspite garnet from an anomalously magnetic concentrate of a pegmatitic cassiterite ore has been investigated using ⁵⁷Fe nuclear gamma-ray resonance spectroscopy. The quadrupole splitting and isomer shift values of 3.6 mm/s and 1.4 mm/s, respectively, are among the largest observed for Fe²⁺ ions and indicate a very low covalency of the dodecahedral Fe²⁺ — O²-bonds. These data support the more recent and lower value (10.2–10.1 kcal/ mole) of White and Moore (1972) for the CFSE of the dodecahedral Fe²⁺ ion and suggest that the CFSE should be a useful approximation to the site preference energy of Fe²⁺ for this site.     

Thermal alteration experiments on organic matter in recent marine sediment—II. Isoprenoids

Several isoprenoid compounds were isolated from a heat-treated marine sediment in the southern California continental shelf (from Tanner Basin) which were not present in the original sediment. Among the compounds identified were: phytol, dihydrophytol, C₁₈-isoprenoid ketone, phytanic and pristanic acids, C₁₉- and C₂₀-monoolefins, and the alkanes 2,6,10-trimethylpentadecane, pristane and phytane. The significance and possible routes leading to these compounds is discussed.     

Thermal alteration experiments on organic matter in recent marine sediment—III. Aliphatic and steroidal alcohols

Recent sediments from Tanner Basin (off southern California) and Bandaras Bay (in Gulf of California) have been analyzed for normal, isoprenoid and steroidal alcohols using chromatographic (column, GLC, TLC), and spectroscopic (u.v., i.r., MS) methods, prior to and after heat-treatment (from 65 to 150°C). Normal saturated alcohols (C₁₄-C₂₄) and monounsaturated alcohols (C₂₂-C₂₄) were identified, as well as the isoprenoid alcohols, phytol and dihydrophytol.Two series of sterols (Δ⁵ and Δ⁷) were found in Tanner Basin, and Δ⁵-sterols and triterpenes, in Bandaras Bay sediment. Sterols from both sediments contained the corresponding stanols.