Major and trace element geochemistry of Lake Bogoria and Lake Nakuru,Kenya, during extreme draught

The physico-chemical properties of water samples from the two athalassic endorheic lakes Bogoria and Nakuru in Kenya were analysed. Surface water samples were taken between July 2008 and October 2009 in weekly intervals from each lake. The following parameters were determined: pH, salinity, electric conductivity, dissolved organic carbon (DOC), the major cations (FAAS and ICP-OES) and the major anions (IC), as well as certain trace elements (ICP-OES). Samples of superficial sediments were taken in October 2009 and examined using Instrumental Neutron Activation Analysis (INAA) for their major and trace element content including rare earth elements (REE). Both lakes are highly alkaline with a dominance of Na > K > Si > Ca in cations and HCO₃ > CO₃ > Cl > F > SO₄ in anions. Both lakes also exhibited high concentrations of Mo, As and fluoride. Due to an extreme draught from March to October 2009, the water level of Lake Nakuru dropped significantly. This created drastic evapoconcentration, with the total salinity rising from about 20‰ up to 63‰. Most parameters (DOC, Na, K, Ca, F, Mo and As) increased with falling water levels. A clear change in the quality of DOC was observed, followed by an almost complete depletion of dissolved Fe from the water phase. In Lake Bogoria the evapoconcentration effects were less pronounced (total salinity changed from about 40‰ to 48‰). The distributions of REE in the superficial sediments of Lake Nakuru and Lake Bogoria are presented here for the first time. The results show a high abundance of the REE and a very distinct Eu depletion of Eu/Eu* = 0.33–0.45.     

Melting of clinopyroxene + magnesite in iron-bearing planetary mantles and implications for the Earth and Mars

The assemblage clinopyroxene + magnesite was observed in Earth’s high-pressure metamorphic samples, and its stability in subducting slabs was confirmed by experiments. Recent studies also suggested that the fO₂ variations observed in SNC meteorites can be explained by polybaric graphite-CO-CO₂ equilibria in the Martian mantle. Although there is no direct evidence for the stability of the cpx + mc assemblage in Mars mantle, its high-pressure–high-temperature decomposition to cpx + fo + CO₂ makes it a good analogue for the source of carbon metasomatism, in particular, to study nakhlites formation. Iron, which is present in the Earth’s and Martian mantles, may, however, influence the speciation of carbon. We performed experiments on a clinopyroxene + magnesite assemblage at 1.8 and 3.0 GPa and temperatures corresponding to the Earth’s and Martian mantles. The role of iron and of fO₂ was investigated by (1) replacing all or part of the magnesite by siderite FeCO₃, (2) adding Fe⁰ and (3) using graphite C capsules. A carbonate-silicate melt forms at both Earth and Mars conditions. Clinopyroxene and olivine are the main solid phases in the iron-free experiments. Fe²⁺ and Fe⁰ decrease their melting temperatures and increase the silicate fraction in the melt. The produced carbonate-silicate melts may be involved in the formation of some carbon-rich lavas on Earth (e.g., carbonatites, ultramafic lamprophyres, or kamafugites). Our results may also be used to interpret ophiolite samples or inclusions. In particular, we show that wüstite may form in equilibrium with carbonate-silicate melt in opx-(and silica-) poor regions of the mantle below 3 GPa. Our results also confirm the hypothesis of carbon metasomatism in the Martian nakhlites source. Immiscibility or reduction could explain the absence or rarity of C in Martian lavas.     

An amalgamated meter-thick sedimentary package enabled by the 2011 Tohoku tsunami in El Garrapatero,Galapagos Islands

Tsunamis and storms instigate sedimentological and geomorphological changes to the coastal system, both long-term and ephemeral. To accurately predict future coastal hazards, one must identify the records that are generated by the processes associated with these hazards and recognize what will be preserved. Using eyewitness accounts, photographs, and sedimentology, this study documents pre- and post-tsunami conditions and constrains the timing and process of depositional events during and following the 11 March 2011 Tohoku tsunami in the coastal system at El Garrapatero, Galapagos Islands. While the tsunami acted as both an erosional and depositional agent, the thick, fan-like sand sheet in El Garrapatero was primarily emplaced by overwash deposition during high tide from swell waves occurring between 19–25 March and 17–22 April 2011. The swell waves were only able to access the terrestrial coastal system via a channel carved by the 2011 Tohoku tsunami through the barrier sand dune. This combined deposit could result in an overestimation of the hazard if interpreted to be the result of only one event (either tsunami or wind-generated waves). An analogous sand layer, younger than 1390–1530 cal yr BP, may record a similar, prior event.     

Mineralogical and Geochemical Constraints on the Sediment Sources of Late Stone Age Pottery from the Birimi Site,Northern Ghana

The mineralogy and bulk chemical compositions of 15 Kintampo (Late Stone Age) potsherds from the Birimi site on the Gambaga Escarpment and eight samples of local sediment were determined with the intent of characterizing these wares and identifying the material used in their manufacture. Sediment from clay pits still used by potters north of the escarpment contains iron‐rich laterite clasts (100 × XFeO_t = 100 × FeO_t/[FeO_t + Al₂O₃ + SiO₂] ≥10). Sedimentary clasts in stream sediments are relatively siliceous and iron‐poor (100 × XFeO_t < 10). Bulk geochemical data together with the compositions of lithic clasts (laterite, siltstone/sandstone) link the pottery to sediment sources, including escarpment sediments not presently used by Ghanaian potters. Fresh granite clasts found in some of the sherds were not found in the analyzed sediment samples, although some of their distinctive mineralogical constituents (e.g., variably barian alkali feldspar) are present. The analytical data suggest that pots found at Birimi were made locally by mixing escarpment sediment with clay and stream sediment brought in from below the escarpment. This contrasts with present‐day practice, whereby the pots themselves are imported. The place where Birimi pottery was made and the outcrop source of aluminous sediment (mudstone with an “escarpment” trace element signature) used in these wares, however, remain unidentified. © 2013 Wiley Periodicals, Inc.     

Cu- and Mn-bearing tourmalines from Brazil and Mozambique: crystal structures, chemistry and correlations

Cu- and Mn-bearing tourmalines from Brazil and Mozambique were characterised chemically (EMPA and LA-ICP-MS) and by X-ray single-crystal structure refinement. All these samples are rich in Al, Li and F (fluor-elbaite) and contain significant amounts of CuO (up to ~1.8 wt%) and MnO (up to ~3.5 wt%). Structurally investigated samples show a pronounced positive correlation between the <Y-O> distances and the (Li + Mn²⁺ + Cu + Fe²⁺) content (apfu) at this site with R ² = 0.90. An excellent negative correlation exists between the <Y-O> distances and the Al₂O₃ content (R ² = 0.94). The samples at each locality generally show a strong negative correlation between the X-site vacancies and the (MnO + FeO) content. The Mn content in these tourmalines depends on the availability of Mn, on the formation temperature, as well as on stereochemical constraints. Because of a very weak correlation between MnO and CuO we believe that the Cu content in tourmaline is essentially dependent on the availability of Cu and on stereochemical constraints.     

Understanding the effect of single-fracture heterogeneity from single-well injection-withdrawal (SWIW) tests

The single-well injection-withdrawal (SWIW) tracer test is a method used to estimate the tracer retardation properties of a fracture or fracture zone. The effects of single-fracture aperture heterogeneity on SWIW-test tracer breakthrough curves are examined by numerical modelling. The effects of the matrix diffusion and sorption are accounted for by using a particle tracking method through the addition of a time delay added to the advective transport time. For a given diffusion and sorption property (P _m) value and for a heterogeneous fracture, the peak concentration is larger compared to a homogeneous fracture. The cumulative breakthrough curve for a heterogeneous fracture is similar to that for a homogeneous fracture and a less sorptive/diffusive tracer. It is demonstrated that the fracture area that meets the flowing water, the specific flow-wetted surface (sFWS) of the fracture, can be determined by matching the observed breakthrough curve for a heterogeneous fracture to that for a homogeneous fracture with an equivalent property parameter. SWIW tests are also simulated with a regional pressure gradient present. The results point to the possibility of distinguishing the effect of the regional pressure gradient from that of diffusion through the use of multiple tracers with different P _m values.     

Non-glacial paleoenvironments and the extent of Weichselian ice sheets on Severnaya Zemlya, Russian High Arctic

The extent of the Barents-Kara Sea ice sheet (northern Europe and Russia) during the Last Glacial Maximum (LGM), in Marine Isotope Stage (MIS) 2 is controversial, especially along the southern and northeastern (Russian High Arctic) margins. We conducted a multi-disciplinary study of various organic and mineral fractions, obtaining chronologies with ¹⁴C and luminescence dating methods on a 10.5 m long core from Changeable Lake (4 km from the Vavilov Ice Cap) on Severnaya Zemlya. The numeric ages indicate that the last glaciation at this site occurred during or prior to MIS 5d-4 (Early Middle Weichselian). Deglaciation was followed by a marine transgression which affected the Changeable Lake basin. After the regression the basin dried up. In late Middle Weichselian time (ca 25–40 ka), reworked marine sediments were deposited in a saline water body. During the Late Weichselian (MIS 2), the basin was not affected by glaciation, and lacustrine sediments were formed which reflect cold and arid climate conditions. During the termination of the Pleistocene and into the Holocene, warmer and wetter climate conditions than before led to a higher sediment input. Thus, our chronology demonstrates that the northeastern margin of the LGM Barents-Kara Sea ice sheet did not reach the Changeable Lake basin. This result supports a modest model of the LGM ice sheet in northern Europe determined from numeric ice sheet modelling and geological investigations.     

Modeling the onset of photosynthesis after the Chicxulub asteroid impact

We do a preliminary modelling of the photosynthetic rates of phytoplankton at the very beginning of the Paleogene, just after the impact of the Chicxulub asteroid, which decisively contributed to the last known mass extinction of the Phanerozoic eon. We assume the worst possible scenario from the photobiological point of view: an already clear atmosphere with no ozone, as the timescale for soot and dust settling (years) is smaller than that of the full ozone regeneration (decades). Even in these conditions we show that most phytoplankton species would have had reasonable potential for photosynthesis in all the three main optical ocean water types. This modelling could help explain why the recovery of phytoplankton was relatively rapid after the huge environmental stress of that asteroid impact. In a more general scope, it also reminds us of the great resilience of the unicellular biosphere against huge environmental perturbations.     

In-phase anomalies in Beryllium-10 production and palaeomagnetic field behaviour during the Iceland Basin geomagnetic excursion

Increases in the production rate of cosmogenic radionuclides associated with geomagnetic excursions have been used as global tie-points for correlation between records of past climate from marine and terrestrial archives. We have investigated the relative timing of variations in ¹⁰Be production rate and the corresponding palaeomagnetic signal during one of the largest Pleistocene excursions, the Iceland Basin (IB) event (ca. 190 kyr), as recorded in two marine sediment cores (ODP Sites 1063 and 983) with high sedimentation rates. Variations in ¹⁰Be production rate during the excursion were estimated by use of ²³⁰Th_xs normalized ¹⁰Be deposition rates and authigenic ¹⁰Be/⁹Be. Resulting ¹⁰Be production rates are compared with high-resolution records of geomagnetic field behaviour acquired from the same discrete samples. We find no evidence for a significant lock-in depth of the palaeomagnetic signal in these high sedimentation-rate cores. Apparent lock-in depths in other cores may sometimes be the result of lower sample resolution. Our results also indicate that the period of increased ¹⁰Be production during the IB excursion lasted longer and, most likely, started earlier than the corresponding palaeomagnetic anomaly, in accordance with previous observations that polarity transitions occur after periods of reduced geomagnetic field intensity prior to the transition. The lack of evidence in this study for a significant palaeomagnetic lock-in depth suggests that there is no systematic offset between the ¹⁰Be signal and palaeomagnetic anomalies associated with excursions and reversals, with significance for the global correlation of climate records from different archives.