Plate motion on Europa and nonrigid behavior of the Icy lithosphere: The Castalia Macula region

We have developed a generalized quantitative technique for determining the finite pole of rotation between two rigid plates and use it to critically examine differing reconstructions of a region surrounding a prominent dark spot on Europa, Castalia Macula. This region is located near the equator of Europa's trailing hemisphere and has been suggested as a site where crustal convergence may have occurred. Previous reconstructions of the region have indicated that a ridge set and/or a band-like complex that define a collection of tectonic plates in the region accommodated surface contraction. However, a critical examination of the differences between these reconstructions has been complicated by the lack of a finite pole of rotation for the plates involved in either reconstruction. We have applied our modeling technique, coupled with a detailed examination of the morphology and cross-cutting relationships involving this ridge set and band-like complex, to determine if a unique reconstruction exists for several tectonic plates in this region. The cross-cutting relationships involving the ridge set also allow us to test the general assumption that plates behave rigidly on Europa. Assuming rigid behavior, our results suggest that a unique reconstruction does exist, indicating the ridge set accommodated surface contraction. However, analysis performed to test the assumption of plate rigidity indicates that one or more of the plates in the region did not behave rigidly. This does not rule out surface contraction along the ridge set but does indicate that a component of nonrigid behavior must be considered.     

Field-scale Variations in Plant and Grasshopper Communities: A GIS-based Assessment

GIS technology allowed us to examine species-specific occurrence and abundance patterns of important grassland herbivore species through the use of appropriate statistical methods and the superior spatial representation commonly available in existing GIS packages. The study was conducted on a 254 ha grassland area located 10 km south of Three Forks, Gallatin County, Montana, in the Agropyron spicatum province of the western steppe region of the U.S.A. From an ecological perspective, grasshopper species distribution and abundance patterns observed on a local, non-uniform landscape (2.6 km 2) were consistent with results found in other studies at the valley (≈1,400 km 2) and state-level (≈237,000 km 2) scales. Our observations at the local scale further demonstrate the importance of vegetation type and specific local stand physiognomies in structuring grasshopper populations. The application of results from studies conducted at various scales to the development of decision support tools for resource managers is also discussed.     

Timing of magma extraction during the Campanian Ignimbrite eruption (Campi Flegrei Caldera)

A core drilled within the northern part of the city of Napoli has offered the unique opportunity to observe in one single sequence the superposition of the four pyroclastic flow units emplaced during the Campanian Ignimbrite (CI) eruption. Such a stratigraphic succession has never been encountered before in natural or in man made exposures. Therefore the CI sequence was reconstructed only on the basis of stratigraphic correlations and compositional data (in literature). The occurrence of four superposed CI flows, together with all the data available (in literature) allowed us to better constrain the chemical stratigraphy of the deposit and the compositional structure of the CI magma chamber. The CI magma chamber includes two cogenetic magma layers, separated by a compositional gap. The upper magma layer was contaminated by interaction with radiogenic fluids. The two magma layers were extruded either individually or simultaneously during the course of the eruption. In the latter case they produced a hybrid magma. But no evidence of input of new geochemically and isotopically distinct magma batches just prior or during the eruption has been found. Comparison with the exposed CI deposits has permitted reconstruction of variable eruption phases and related magma withdrawal and caldera collapse episodes. The eruption was likely to have began with phreatomagmatic explosions followed by the formation of a sustained plinian eruption column fed by the simultaneous extraction from both magma layers. Towards the end of this phase the upward migration of the fragmentation surface and the decrease in magma eruption rate and/or activation of fractures formed an unstable pulsating column that was fed only by the most-evolved magma layer. This plinian phase was followed by the collapse of the eruption column and the beginning of caldera formation. At this stage expanded pyroclastic flows fed by the upper magma layer in the chamber generated. During the following major caldera collapse episode, the maximum mass discharge rate was reached and both magma layers were tapped, generating expanded pyroclastic flows. Towards the end of the eruption, only the deeper and less differentiated magma layer was tapped producing more concentrated pyroclastic flows that traveled short distances.     

Fluid seepage along the San Clemente Fault scarp: basin-wide impact on barium cycling

Material fluxes associated with fluid expulsion at cold seeps and their contribution to oceanographic budgets have not been accurately constrained. Here we present evidence that the barium released at cold seeps along the San Clemente Fault zone may significantly impact the geochemical budget of barium within the basin. Barium fluxes at seep localities on the fault scarp, measured with benthic chambers, reach values as high as 5 mmol m⁻² day⁻¹. This is the largest dissolved barium flux measured to date at a cold seep. The discharge of barium-rich fluids results in formation of massive barite deposits along the escarpment wall. The deposits are young (approximately 8 yr) and appear to grow at a minimum rate of 0.2 cm yr⁻¹. This rapid growth rate requires a barium efflux rate that is about two orders of magnitude higher than the measured dissolved flux. We believe that the discrepancy reflects a highly localized seepage system and that chambers positioned as close as possible to the growing chimneys did not sample the foci of fluid discharge. Transport of fine barite particles from the seeps may be responsible for excess rates of barium accumulation throughout the San Clemente Basin, relative to other basins in the California Margin. Based on a preliminary budget, we estimate that cold-seep barite is accumulating at the basin floor in San Clemente at a rate of 2 μmol m⁻² day⁻¹, a value that is comparable to the total barium accumulation rates driven by detrital and biogenic components in neighboring basins. Remobilization of cold-seep barite on the basin floor adds to that driven by the biogenic barium flux and results in benthic barium recycling rates (effluxes) within the San Clemente Basin that are as much as seven times higher than the effluxes from surrounding borderland basins. Our estimates imply that processes associated with fluid seepage along the San Clemente Fault significantly contribute to the basin’s barium cycle. The strontium isotopic composition of the seep barite is significantly different from marine ‘biogenic’ barite, which is known to accurately record seawater composition. In addition, the seep deposits are depleted in ²²⁶Ra relative to their modern biogenic counterparts, and are likely to be a source of radium-depleted particulate barium to the basin. Thus the impact of barite transport from seeps on the San Clemente escarpment to the basin floor might also have implications for the geochemistry of elements other than barium.     

Individual and Synergistic Effects of Metronidazole,Amoxicillin, and Ciprofloxacin on Methane Fermentation with Sewage Sludge

Methane fermentation is widely used to dispose of sewage sludge at wastewater treatment plants (WWTPs), due to production of renewable energy in the form of biogas. Antibiotics present in wastewater may accumulate in a sewage sludge. The aim of the present study is to investigate the impact of three antibiotics from different classes in three different doses on methane production from sewage sludge. For this purpose, metronidazole (MET), amoxicillin (AMO), and ciprofloxacin (CIP) are individually added to anaerobic reactors with sewage sludge collected from municipal WWTP. The antibiotics’ highest concentration (1024 mg kg^?1 of AMO; 512 mg kg^?1 of MET and CIP) lowers methane production and methane content in biogas. MET exerts the most marked effect and lowers methane production to 36.8 ± 3.7 mL CH₄ kg^?1 volatile solids. Tested antibiotics probably inhibit methanogenic archaea, which results in volatile fatty acids (VFAs) accumulation. Addition of MET results in accumulation of many kinds of VFAs with the highest concentration of acetic acid (17.52 ± 1.85 g L^?1). The addition of of AMO results in accumulation of butyric acid only (253.00 ± 15.89 g L^?1). However, addition of CIP results in accumulation of mainly acetic acid (7.58 ± 0.82 g L^?1) and isovaleric acid (2.01 ± 0.41 g L^?1). Next, synergistic effect of these antibiotics in a low concentration of 16 mg kg^?1 of AMO, 8 mg kg^?1 of MET, and 2 mg kg^?1 of CIP is measured in semi‐continuous conditions and causes inbibition of methane production and accumulation of VFAs.     

The use of the slope–area function to analyse process domains in complex badland landscapes

This paper explores the effectiveness of the widely-used functional relationship between drainage area (A in m²) and slope (S in m/m) to identify local process domains and aid interpretation of process interactions in a complex badland landscape. In order to perform this investigation, a series of sub-basins tributary to the Formone River in the Orcia catchment (central Italy) were selected as a suitable study area within which to explore our questions, given these basins' general representativeness of local terrain, the availability of a high resolution digital terrain model and previous extensive geomorphological research. Eroding basins containing both calanchi and landslides are common in the sub-humid badland landscape of central Italy, where field observation identifies a complex pattern of erosive processes associated with a history of uplift, despite which parts of the local landscape appear disconnected. Results reveal that the shape of all S–A curves (plotted using S data binned on log A) is comparable with that described in the literature, although sub-basins containing calanchi generally plot with higher S values than non-calanchi ones, except in the ‘fluvial’ section of the plots. Second, when viewed on total data (non-binned) S–A plots, landslide source area domains and calanchi domains are entirely coincident in all basins, supporting a cause–effect relationship. Additional plotting of the frequency characteristics of the raw data in a new way supports the interpretation that calanchi frequently initiate in landslide scars. In general though, although the S–A plots can contribute to the disentanglement of geomorphological behaviour in some complex erosional landscapes, it became apparent that in this landscape, process domains do not separate out with clarity along the A axis as suggested by theory. Despite this, an alternative, broader-scale morphoevolutive model can be proposed for the development of within-landslide calanchi, driven by changes to basin connectivity to the base channel. © 2018 John Wiley & Sons, Ltd.     

Status and outlook of hiking trails in the central part of the Low Tatra Mountains in Slovakia between 1980–1981 and 2013–2014

This study presents a methodology for assessment of the condition of hiking trails (HTs) and their impact zones in the central part of the Low Tatra mountain range, based on comparison of two complex data sets gathered in 33 years apart. The first field investigation was performed in 1980 and 1981, and the second in 2013 and 2014. The main goal was to perform a landscape typology in order to assess the susceptibility of landscape complexes to occurrence of anthropogenic and natural destruction processes and to assess the condition and prospects of HTs and their impacts on the adjacent alpine environment. Landscape complexes were characterised by selected abiotic, biotic and technical parameters of HTs and their impact zones. Due to the high variability of these parameters over the length of the HTs, we had to decide on how to map them. This was done using a square grid with 100 m-sized cells. For each cell with HT, the parameters were assigned the typical value within that cell. In total, 26.3 km of HT were studied, stretching over 266 grid cells. On comparison of the two data sets, it was seen that, 64% (171 grid cells) display a generally positive condition, with 54% (143 grid cells) even exhibiting significant improvement or continuously positive state of their condition. 36% (95 grid cells) were in bad condition, including 3% (9 grid cells) whose state had deteriorated, and 2% (6 grid cells) whose state had significantly deteriorated, in the time between the two assessments.     

Regional scenarios of sea level rise and impacts on Basque (Bay of Biscay) coastal habitats,throughout the 21st century

Global climate models have predicted a rise on mean sea level of between 0.18 m and 0.59 m by the end of the 21st Century, with high regional variability. The objectives of this study are to estimate sea level changes in the Bay of Biscay during this century, and to assess the impacts of any change on Basque coastal habitats and infrastructures. Hence, ocean temperature projections for three climate scenarios, provided by several atmosphere–ocean coupled general climate models, have been extracted for the Bay of Biscay; these are used to estimate thermosteric sea level variations. The results show that, from 2001 to 2099, sea level within the Bay of Biscay will increase by between 28.5 and 48.7 cm, as a result of regional thermal expansion and global ice-melting, under scenarios A1B and A2 of the Intergovernmental Panel on Climate Change. A high-resolution digital terrain model, extracted from LiDAR, data was used to evaluate the potential impact of the estimated sea level rise to 9 coastal and estuarine habitats: sandy beaches and muds, vegetated dunes, shingle beaches, sea cliffs and supralittoral rock, wetlands and saltmarshes, terrestrial habitats, artificial land, piers, and water surfaces. The projected sea level rise of 48.7 cm was added to the high tide level of the coast studied, to generate a flood risk map of the coastal and estuarine areas. The results indicate that 110.8 ha of the supralittoral area will be affected by the end of the 21st Century; these are concentrated within the estuaries, with terrestrial and artificial habitats being the most affected. Sandy beaches are expected to undergo mean shoreline retreats of between 25% and 40%, of their width. The risk assessment of the areas and habitats that will be affected, as a consequence of the sea level rise, is potentially useful for local management to adopt adaptation measures to global climate change.     

<Emphasis Type="Italic">P</Emphasis>–<Emphasis Type="Italic">T</Emphasis> and fluid evolution of barren and lithium pegmatites from Vlastějovice,Bohemian Massif,Czech Republic

Fluid inclusions, mineral thermometry and stable isotope data from two types of mineralogically and texturally contrasting pegmatites, barren ones and lithium ones, from the Moldanubian Zone of the Bohemian Massif were studied in order to constrain P–T conditions of their emplacement, subsolidus hydrothermal evolution and to estimate composition of the early exsolved fluid and that of the parental melt. Despite the fact that the lithium pegmatites are abundant throughout the crystalline units of the Bohemian Massif, data similar to this paper have not been published yet. The studied pegmatites are hosted by iron-rich calcic skarn bodies. This specific setting allowed scavenging of calcium, fluorine and some other elements from the host rocks into the pegmatitic melts and post-magmatic fluids. Such contamination process was important namely in the case of barren pegmatites, as can be deduced from the variation in anorthite contents in plagioclase and from the presence of fluorite, hornblende (with F content) or garnet in the contact zones of pegmatite dykes. Fluid inclusions were studied mostly in quartz, but also in fluorite, titanite and apatite. Early aqueous–carbonic and late aqueous fluids were identified in both pegmatite types. The P–T conditions of crystallization as well as the detailed composition of exsolved magmatic fluid, however, particularly differ. The magmatic fluids associated with barren pegmatites correspond to H₂O–CO₂ low salinity fluids, composition of which evolved from 20 to 23 to <5 mol% CO₂, and from 2 to 4–6 mol% NaCl eq. Sudden decrease in the CO₂ content of the post-magmatic fluids (<5 mol% CO₂) seems to coincide with the enrichment of the fluid in calcium (from the contamination process) and resulted in precipitation of calcites (frequently found as trapped solid phases in fluid inclusions). The fluids associated with lithium pegmatites are more complex (H₂O–CO₂/N₂–H₃BO₃–NaCl). The CO₂ content of early exsolved fluid is 26–20 mol% CO₂ and remains the same in the next fluid generation. The main difference between the magmatic and the first post-magmatic fluids is the presence of 7–9 wt% of H₃BO₃ (identified as daughter mineral sassolite) in the former. The second post-magmatic fluids are again CO₂-poor (∼4 mol%) and more saline (∼4 mol% NaCl eq.). The composition of exsolved fluid was further used to constrain volatile composition and content of the parental melts. Finally, P–T conditions of pegmatite crystallization are constrained: 600–640°C and 420–580 MPa for the barren pegmatites and 500–570°C and 310–430 MPa for the lithium pegmatite. While the emplacement of the former occurred in thermal equilibrium with the Moldanubian host rock environment, the emplacement of the later suggests substantial thermal disequilibrium.     

On the individual calibration of hailpads

This paper is a comparative study between the two most common hailpad calibration systems: one annual calibration of a whole consignment of material, and the individual calibration of each plate after a hailfall. Individual calibration attempts to minimize errors due to differences in sensitivity to the impact of hailstones between plates from the same consignment, or due to differences in the inking process before the actual measurement.The comparison was carried out using calibration data from the past few years in the hailpad network in south-western France, and data from an individual calibration process on material provided by the hailpad network in Lleida (Spain). The same type of material was used in the two cases.The results confirm that the error in measuring hailstone sizes is smaller in the case of an individual calibration of hailpads than when one single calibration process was carried out for a whole consignment. The former is approximately 80% of the latter. However, this error could have been higher if it had not been the same person carrying out the single calibration process and the measuring of the dents: it has been found that differences in the inking process may account for up to 20% of the error in the case of small hailstones. Calibration errors affecting other variables, e.g. energy or parameter λ of the exponential size distribution are generally higher (5% and 18%, respectively) than errors due to the spatial variability of the hailstones. However, the calibration method does not influence the maximum size, since the relative error attributed to the spatial variability is about 8 times the calibration error.In conclusion, if errors in determining energy or parameter λ are to be reduced to a minimum, it is highly advisable to be consistent in applying the measuring procedure (if possible with the same person carrying out the measurements all the time), and even to use individual calibration on each plate, always bearing in mind that technicians have to be trained appropriately in order to achieve the highest possible degree of uniformity.