Mapping of erosion rates in marly badlands based on a coupling of anatomical changes in exposed roots with slope maps derived from LiDAR data

Black marls form very extensive outcrops in the Alps and constitute some of the most eroded terrains, thus causing major problems of sedimentation in artificial storage systems (e.g. reservoirs) and river systems. In the experimental catchments near Draix (France), soil erosion rates have been measured in the past at the plot scale through a detailed monitoring of surface elevation changes and at the catchment scale through continuous monitoring of sediment yield in traps at basin outlets. More recently, erosion rates have been determined by means of dendrogeomorphic techniques in three monitored catchments of the Draix basin. A total of 48 exposed roots of Scots pine have been sampled and anatomical variations in annual growth rings resulting from denudation analysed. At the plot scale, average medium‐term soil erosion rates derived from exposed roots vary between 1·8 and 13·8 mm yr^?1 (average: 5·9 mm yr^?1) and values are significantly correlated with slope angle. The dendrogeomorphic record of point‐scale soil erosion rates matches very well with soil erosion rates measured in the Draix basins. Based on the point‐scale measurements and dendrogeomorphic results obtained at the point scale, a linear regression model involving slope angle was derived and coupled to high‐resolution slope maps obtained from a LiDAR‐generated digital elevation model so as to generate high‐resolution soil erosion maps. The resulting regression model is statistically significant and average soil erosion rates obtained from the areal erosion map (5·8, 5·2 and 6·2 mm yr^?1 for the Roubine, Moulin and Laval catchments, respectively) prove to be well in concert with average annual erosion rates measured in traps at the outlet of these catchments since 1985 (6·3, 4·1 and 6·4 mm yr^?1). This contribution demonstrates that dendrogeomorphic analyses of roots clearly have significant potential and that they are a powerful tool for the quantification and mapping of soil erosion rates in areas where measurements of past erosion is lacking. Copyright © 2011 John Wiley & Sons, Ltd.     

Nuclear and incommensurate magnetic structure of NaFeGe2O6 between 5?K and 298?K and new data on multiferroic NaFeSi2O6

The compound NaFeGe₂O₆ was grown synthetically as polycrystalline powder and as large single crystals suitable for X-ray and neutron-diffraction experiments to clarify the low temperature evolution of secondary structural parameters and to determine the low temperature magnetic spins structure. NaFeGe₂O₆ is isotypic to the clinopyroxene-type compound aegirine and adopts the typical HT-C2/c clinopyroxene structure down to 2.5?K. The Na-bearing M2 polyhedra were identified to show the largest volume expansion between 2.5?K and room temperature, while the GeO₄ tetrahedra behave as stiff units. Magnetic susceptibility measurements show a broad maximum around 33?K, which marks the onset of low-dimensional magnetic ordering. Below 12?K NaFeGe₂O₆ transforms to an incommensurately modulated magnetic spin state, with k?=?[0.323, 1.0, 0.080] and a helical order of spins within the M1-chains of FeO₆ octahedra. This is determined by neutron-diffraction experiments on a single crystal. Comparison of NaFeGe₂O₆ with NaFeSi₂O₆ is given and it is shown that the magnetic ordering in the latter compound, aegirine, also is complex and is best described by two different spin states, a commensurate one with C2??/c?? symmetry and an incommensurate one, best being described by a spin density wave, oriented within the (1 0 1) plane.     

Survival of the thinnest: rediscovery of Bauer’s (1898) ichthyosaur tooth sections from Upper Jurassic lithographic limestone quarries,south Germany

During the late Early Cretaceous, the shallow-water domains of the western Tethys are characterized by the widespread deposition of Urgonian-type carbonates rich in rudists, corals and other oligotrophic, shallow-marine organisms. In the Helvetic Alps, the Urgonian occurrences have been dated by ammonite biostratigraphy as Late Barremian and Early Aptian. For the more proximal occurrences in the western Swiss Jura, a recent age model based on bio-, chemo- and sequence stratigraphy has been proposed, which allows for an improved correlation with the Helvetic counterparts. In order to corroborate the recently proposed age model for the Jura, a set of well-preserved rhynchonellids collected from five different lithostratigraphical formations and members (“Marnes bleues d’Hauterive”, “Marnes d’Uttins”, basal marly layers within the “Urgonien Jaune”, “Marnes de la Russille”, “Urgonien Blanc”) has been analysed for its strontium–isotope ratios (⁸⁷Sr/⁸⁶Sr). In addition, K–Ar dating was performed on well-preserved glauconite grains from two different levels (“Marnes d’Uttins” and a basal layer within the “Urgonien Jaune”). The correlation of the Sr–isotope data set with a belemnite-based, ammonite-calibrated reference curve provides an age model which is coherent with recently published ages based on calcareous nannofossil biostratigraphy and the correlation of trends in chemo- and sequence stratigraphy. K–Ar dating on well-preserved glauconite grains from the “Marnes d’Uttins” and lowermost part of the “Urgonien Jaune” delivered ages of 127.5 ± 2.3 and 130.7 ± 2.6 Ma, respectively. Whereas the age of the glauconitic level near the base of the “Urgonien Jaune” is chronostratigraphically meaningful, the K–Ar age of the “Marnes d’Uttins” appears too young relative to the presently used time scale. This may be related to rejuvenation of the K–Ar chronometer due to post-depositional Ar loss, most likely during hardground formation. The ages obtained here confirm the Late Barremian age for the onset of the Urgonian platform, an age which is conform with ages obtained in the Helvetic Alps and elsewhere along the northern Tethyan margin.     

Optimal design of pumping tests in leaky aquifers for stream depletion analysis

We analyze the optimal design of a pumping test for estimating hydrogeologic parameters that are subsequently used to predict stream depletion caused by groundwater pumping in a leaky aquifer. A global optimization method is used to identify the test’s optimal duration and the number and locations of observation wells. The objective is to minimize predictive uncertainty (variance) of the estimated stream depletion, which depends on the sensitivities of depletion and drawdown to relevant hydrogeologic parameters. The sensitivities are computed analytically from the solutions of Zlotnik and Tartakovsky [Zlotnik, V.A., Tartakovsky, D.M., 2008. Stream depletion by groundwater pumping in leaky aquifers. ASCE Journal of Hydrologic Engineering 13, 43–50] and the results are presented in a dimensionless form, facilitating their use for planning of pumping test at a variety of sites with similar hydrogeological settings. We show that stream depletion is generally very sensitive to aquitard’s leakage coefficient and stream-bed’s conductance. The optimal number of observation wells is two, their optimal locations are one close to the stream and the other close to the pumping well. We also provide guidelines on the test’s optimal duration and demonstrate that under certain conditions estimation of aquitard’s leakage coefficient and stream-bed’s conductance requires unrealistic test duration and/or signal-to-noise ratio.     

Predictive error dependencies when using pilot points and singular value decomposition in groundwater model calibration

A significant practical problem with the pilot point method is to choose the location of the pilot points. We present a method that is intended to relieve the modeler from much of this responsibility. The basic idea is that a very large number of pilot points are distributed more or less uniformly over the model area. Singular value decomposition (SVD) of the (possibly weighted) sensitivity matrix of the pilot point based model produces eigenvectors of which we pick a small number corresponding to significant eigenvalues. Super parameters are defined as factors through which parameter combinations corresponding to the chosen eigenvectors are multiplied to obtain the pilot point values. The model can thus be transformed from having many-pilot-point parameters to having a few super parameters that can be estimated by nonlinear regression on the basis of the available observations. (This technique can be used for any highly parameterized groundwater model, not only for models parameterized by the pilot point method.)     

Functioning of intertidal flats inferred from temporal and spatial dynamics of O<Subscript>2</Subscript>, H<Subscript>2</Subscript>S and pH in their surface sediment

In this article, we describe the dynamics of pH, O₂ and H₂S in the top 5–10 cm of an intertidal flat consisting of permeable sand. These dynamics were measured at the low water line and higher up the flat and during several seasons. Together with pore water nutrient data, the dynamics confirm that two types of transport act as driving forces for the cycling of elements (Billerbeck et al. 2006b): Fast surface dynamics of pore water chemistry occur only during inundation. Thus, they must be driven by hydraulics (tidal and wave action) and are highly dependent on weather conditions. This was demonstrated clearly by quick variation in oxygen penetration depth: Seeps are active at low tide only, indicating that the pore water flow in them is driven by a pressure head developing at low tide. The seeps are fed by slow transport of pore water over long distances in the deeper sediment. In the seeps, high concentrations of degradation products such as nutrients and sulphide were found, showing them to be the outlets of deep-seated degradation processes. The degradation products appear toxic for bioturbating/bioirrigating organisms, as a consequence of which, these were absent in the wider seep areas. These two mechanisms driving advection determine oxygen dynamics in these flats, whereas bioirrigation plays a minor role. The deep circulation causes a characteristic distribution of strongly reduced pore water near the low water line and rather more oxidised sediments in the centre of the flats. The two combined transport phenomena determine the fluxes of solutes and gases from the sediment to the surface water and in this way create specific niches for various types of microorganisms.     

Elimination of Carbamazepine,Diclofenac and Naproxen from Treated Wastewater by Nanofiltration

Most conventional wastewater treatment plants remove very small amounts of micropollutants, such as pharmaceuticals. Here, the ability of two different types of submerged nanofiltration flat sheet modules to remove pharmaceuticals from wastewater is analyzed. The two nanofiltration membranes were used at relatively low pressures of only 0.3 and 0.7 bar. At such low pressures, the membranes did not retain salts to a great extent. This is advantageous in wastewater treatment because no salt concentrate is produced. Carbamazepine was retained only slightly by the nanofiltration membranes, whereas approximately 60% of diclofenac and naproxen were retained by both membranes. This level of effectiveness might not be enough to justify the use of such a system as an additional treatment step in wastewater treatment plants.     

Chicxulub impactites: Geochemical clues to the precursor rocks

Abstract— The 65 Ma Chicxulub impact structure, Mexico, with a diameter of ～180 km is the focus of geoscientific research because of its link to the mass extinction event at the Cretaceous‐Tertiary (K/T) boundary. Chicxulub, now buried beneath thick post‐impact sediments, is probably one of the best‐preserved terrestrial impact structures known. Because of its inaccessibility, only limited samples on the impact lithologies from a few drill cores are available. We report major element and Sr‐, Nd‐, O‐, and C‐isotopic data for Chicxulub impact‐melt lithologies and basement clasts in impact breccias of drill cores C‐1 and Y‐6, and for melt particles in the Chicxulub ejecta horizon at the K/T boundary in Beloc, Haiti. The melt lithologies with SiO₂ ranging from 58 to ～63 wt% show significant variations in the content of Al, Ca, and the alkalies. In the melt matrix samples, δ¹³C of the calcite is about ?3%o. The δ¹⁸O values for the siliceous melt matrices of Y‐6 samples range from 9.9 to 12.4%o. Melt lithologies and the black Haitian glass have rather uniform ⁸⁷Sr/⁸⁶Sr ratios (0.7079 to 0.7094); only one lithic fragment displays ⁸⁷Sr/⁸⁶Sr of 0.7141. The Sr model ages T^SrUR for most lithologies range from 830 to 1833 Ma; unrealistic negative model ages point to an open Rb‐Sr system with loss of Rb in a hydrothermal process. The ¹⁴³Nd/¹⁴⁴Nd ratios for all samples, except one basement clast with ¹⁴³Nd/¹⁴⁴Nd of 0.5121, cluster at 0.5123 to 0.5124. In an ?_Nd‐?_Sr diagram, impactites plot in a field delimited by ?_Nd of ?2 to ?6, and ?_Sr of 55 to 69. This field is not defined by the basement lithologies described to occur as lithic clasts in impact breccias and Cretaceous sediments. At least one additional intermediate to mafic precursor component is required to explain the data.     

A luminescence‐based chronology for the Harletz loess sequence,Bulgaria

The Harletz loess‐palaeosol sequence is located in northwestern Bulgaria and represents an important link between well‐studied loess sequences in eastern Romania and further sites to the west of the Carpathians (e.g. Serbia and Hungary). The aim of this study was to establish a chronostratigraphy of the deposits, using various methods of luminescence dating, together with basic stratigraphical field observations as well as magnetic properties. Luminescence dating was carried out using the quartz fine grain fraction and a SAR protocol, and the feldspar coarse grain fraction, applying the MET‐pIRIR protocol. Due to underestimation of the quartz fine grain fraction in the lower parts of the sequence, the resulting chronology is mainly based on the feldspar ages, which are derived from the stimulation temperature at 150 °C. A comparison with nearby sequences from Serbia, Hungary and Romania, and interpretations obtained through the stratigraphical and sedimentological signature of the sequence, supports the established chronology. Our data suggest that the prominent palaeosol (soil complex) in the upper quarter of the sequence was formed during MIS 5. It would follow that large parts of the Last Glacial loess overlying this palaeosol were probably eroded, and that the thick loess accumulation underlying this soil complex can be allocated to the penultimate glacial (MIS 6). A prominent MIS 6 tephra, which has been reported from other sequences in the area, is also present at Harletz.