The extent of soil erosion in upland England and Wales

Following recommendations by the 19th Royal Commission on Environmental Pollution, the area, causes and rates of upland soil erosion in England and Wales were investigated between 1997 and 1999. This paper describes the methods and results of the field survey of 1999 in which the extent of eroded ground was determined. 2. The area of degraded soil and the volume of eroded material were both determined from the dimensions of individual erosion features at 399 field sites located on an orthogonal grid across the uplands. Using measurements of individual erosion features, degraded soil extent in upland England and Wales was estimated at almost 25 000 ha, 2·46 per cent of the total upland area surveyed. Half this eroded area was revegetated and no longer subject to continued accelerated soil loss in 1999. The total volume of eroded material was estimated at 0·284 km³. Although deposition of eroded material occurred within 20 per cent of eroded field sites, the total volume of redeposited material was less than 1 per cent of the total volume of eroded soil. 3. Erosion was more extensive on peat soils than on dry, wet mineral or wet peaty mineral soils. In addition, the higher incidence of erosion at high altitudes and on low slopes reinforced the relationship between erosion and areas of peat formation. Copyright © 2002 John Wiley & Sons, Ltd.     

Comparison of the QBO and F10.7 Solar Flux Effects on Total Mass Density

Geomagnetism and Aeronomy - The comparison of the Quasi Biennial Oscillation (QBO) and F10.7 solar flux effects on Total Mass Density (TMD) obtained from NRLMSIS-00 model for 90 km altitude of...     

Coupling Effect of Riser on Integrated FPS in Deepwater Area

The main challenge in predicting global responses of floating vessels in deepwater and ultra-deepwater areas comes from the system's coupled effect.In this paper,the coupled approach is used to analyze effects of riser on floating system in deepwater.The analysis results show that the coupling effects of risers will mainly affect the low frequency (LF) motions of the system.That is because risers will provide the system with a significant low frequency (LF) damping which will vary with the sea states.Under ...     

The impact of water resources development projects on water vapor pressure trends in a semi-arid region, Turkey

The aim of this study was to investigate long-term seasonal trends and decadal change patterns of monthly mean water vapor pressure (WVP) observation series at 16 meteorological stations scattered point-wisely over the Southeastern Anatolian Project (GAP) area in Turkey, where large-scale soil and water development projects have been put into practice since the 1970s. The record length of WVP observation series of each station varied between 31- and 41-years between 1962 and 2002. The monthly mean WVP observation series of each station was rearranged on seasonal basis. Sequential Mann–Kendall trend test, Sen’s slope estimator, and Spearman’s rank–order correlation tests were employed for detection of likely trends, and Kruskall–Wallis test was used to detect decadal variations in WVP series of each observation station. A possible area of representation for each meteorological station was determined by using the Thiessen polygons technique in a geographical information systems media. It was found that 15 seasonal WVP series have a positive trend covering 97% of the GAP area in the summer season; although one WVP series has a negative trend direction. However, in the spring season, 33% of the area had a positive trend, and a negative trend did not appear in any stations. WVP records in the winter season showed an increasing trend over 19% of the GAP area, whereas a decreasing trend prevailed in 9% of the area. The study results led us to conclude that the substantial increase of WVP observations in summer season could be attributed to both the shift from rain-fed agriculture to irrigated agriculture being made increasingly spacious year by year and building large water reservoirs in the GAP located in a semi-arid region. The results also indirectly suggested that the historical trends in the WVP parameters might be related to global climate change phenomenon.     

Nonlinear Analysis of the Frequency-magnitude Relationship in the Western Circum-Pacific Region

— It has long been realized that the linear Gutenberg-Richter model arduously describes the frequency-magnitude relationship for the magnitude span ranging from small to large earthquakes because of the breakdown of the self-similarity rule due to the changing scaling of the magnitude. Three different segments should be observed from small (usually M < 3.0), through moderate (M < M_c, where M_c is the frequency-magnitude turning point caused by the seismogenic thickness), to large earthquakes (M M_c). We will only concentrate on the moderate and large earthquakes due to their importance. The breakdown of the self-similarity rule from moderate to large earthquakes occurs where the earthquake is big enough to cut through the entire seismogenic layer. A nonlinear hyperbolic model, which fits two linear relations smoothly, is studied in the present paper, where N is the cumulative number of earthquakes with magnitudes larger than or equal to M; a₁ to a₅ are constants to be calculated. The G-R linear relation is actually a special case of the present nonlinear model, i.e., a₃ or a₅ equal to zero. The nonlinear form, with the support of a reasonable physical mechanism, can generally give a better fitting with comparatively minor errors for complete data sets, especially for the areas where large earthquakes are numerous. In order to demonstrate its superiority to the linear G-R relation, thirteen seismogenic zones are examined around the western part of the Circum-Pacific region and western part of China and it is found that the fitting errors from this nonlinear model are, as expected, generally much smaller than those for G-R. Furthermore, the parameter a₄ is believed to relate with the saturated magnitude M_c,which to some extent reflects the mean thickness of the seismogenic layer.Acknowledgement. The author thanks Dr Paul W. Burton for his useful discussions. He appreciates two anonymous reviewers comments and suggestions which enhanced the quality of the paper. This research was partially supported by the project EPAN-M.4.3/2013555 of bilateral cooperation between Greece and China funded by the General Secretariat of Research & Technology of Greece and by the project of UK-China Science and Technology Fund funded by the British Council. Some figures were made with GMT software (WESSEL and SMITH, 1995).     

Removal of cyanide from aqueous solutions by plain and metal-impregnated granular activated carbons

In this study, the removal of free cyanide from aqueous solutions by activated carbon was investigated. Effects of metal impregnation (Cu and Ag), aeration, and concentrations of adsorbent and cyanide on the rate and extent of the removal of cyanide were studied. The results have shown that the capacity of activated carbon for the removal of cyanide can be significantly improved (up to 6.3-fold) via impregnation of activated carbon with metals such as copper and silver. Silver-impregnated activated carbon was found to be the most effective at the reduction of cyanide level in solution. This appeared to be coupled with its comparatively high metal content after impregnation process where silver (5.07%) could be more readily loaded on activated carbon than copper (0.43%). Kinetics and equilibrium data for cyanide removal by plain and metal-impregnated activated carbons were determined to be consistent with the pseudo second-order kinetics and the Langmuir adsorption isotherms, respectively. Aeration (0.27 l/min) was found to exert a profound effect on the process leading to a 5.5–49.1% enhancement in the performances of plain and metal-impregnated activated carbons. This enhancement could be attributed to the increase in the availability of active sites on activated carbon for adsorption and the catalytic oxidising activity of activated carbon in the presence of oxygen. Practical limiting capacity of plain, copper- and silver-impregnated activated carbons for the removal of cyanide were experimentally determined to be 19.7, 22.4 and 29.6 mg/g, respectively.