Comparing efficacy of different taxonomic resolutions and surrogates in detecting changes in soft bottom assemblages due to coastal defence structures

Sandy shores on the West coast of the North Adriatic Sea are extensively protected by different types of defence structures to prevent coastal erosion. Coastal defence schemes modify the hydrodynamic regime, the sediment structure and composition thus affecting the benthic assemblages. This study examines the effectiveness in detecting changes in soft bottom assemblages caused by coastal defence structures by using different levels of taxonomic resolution, polychaetes and/or bivalves as surrogates and different data transformations. A synoptic analyses of three datasets of subtidal benthic macrofauna used in studies aimed at assessing the impact of breakwaters along the North Adriatic coast has been done. Analyses of similarities and correlations between distance matrices were done using matrices with different levels of taxonomic resolution, and with polychaetes or bivalves data alone. Lentidium mediterraneum was the most abundant species in all datasets. Its abundance was not consistently related to the presence of defence structures. Moreover, distribution patterns of L. mediterraneum were masking the structure of the whole macrofaunal assemblages. Removal of L. mediterraneum from the datasets allowed the detection of changes in benthic assemblages due to coastal defences. Analyses on different levels of taxonomic resolution showed that the level of family maintained sufficient information to detect the impacts of coastal defence structures on benthic assemblages. Moreover, the outcomes depended on the transformation used. Patterns of distribution of bivalves, used as surrogates, showed low correlations with the patterns of the total macrofaunal species assemblages. Patterns of polychaetes, if identified to the species or genus level showed higher correlations with the whole dataset. However, the identification of polychaetes to species and genus level is as costly as the identification of all macrobenthic taxa at family level.This study provided additional evidences that taxonomic sufficiency is a useful tool in environmental monitoring, also in investigations on the impacts of coastal defence structures on subtidal macrofauna. The use of coarser taxonomic level, being time-efficient, would allow improving sampling designs of monitoring programs by increasing replication in space and time and by allowing long term monitoring studies.     

Sediment transport at the network scale and its link to channel morphology in the braided Vjosa River system

In this article we apply the CASCADE network-scale sediment connectivity model to the Vjosa River in Albania. The Vjosa is one of the last unimpaired braided rivers in Europe and, at the same time, a data scarce environment, which limits our ability to model how this pristine river might respond to future human disturbance. To initialize the model, we use remotely sensed data and modeled hydrology from a regional model. We perform a reach-by-reach optimization of surface grain size distribution (GSD) and bedload transport capacity to ensure equilibrium conditions throughout the network. In order to account for the various sources of uncertainty in the calculation of transport capacity, we performed a global sensitivity analysis. The modeled GSD distributions generated by the sensitivity analysis generally match the six GSDs measured at different locations within the network. The modeled bedload sediment fluxes increase systematically downstream, and annual fluxes at the outlet of the Vjosa are well within an order of magnitude of fluxes derived from previous estimates of the annual suspended sediment load. We then use the modeled sediment fluxes as input to a set of theoretically derived functions that successfully discriminate between multi-thread and single-thread channel patterns. This finding provides additional validation of the model results by showing a clear connection between modeled sediment concentrations and observed river morphology. Finally, we observe that a reduction in sediment flux of about 50% (e.g., due to dams) would likely cause existing braided reaches to shift toward single thread morphology. The proposed method is widely applicable and opens a new avenue for application of network-scale sediment models that aid in the exploration of river stability to changes in water and sediment fluxes.     

Assessment of CMIP3 climate models and projected changes of precipitation and temperature in the Yangtze River Basin, China

The projected changes of precipitation and temperature in the Yangtze River Basin in the 20th Century from 20 models of the CMIP3 (phase 3 of the Coupled Model Inter-comparison Project) dataset are analyzed based on the observed precipitation and temperature data of 147 meteorological stations in the Yangtze River Basin. The results show that all models tend to underestimate the annual mean temperature over the Yangtze River Basin, and to overestimate the annual mean precipitation. The temporal changes of simulated annual mean precipitation and temperature are broadly comparable with the observations, but with large variability among the results of the models. Most of the models can reproduce maximum precipitation during the monsoon season, while all models tend to underestimate the mean temperature of each month over the Yangtze River Basin. The Taylor diagram shows that the differences between modeled and observed temperature are relatively smaller as compared to differences in precipitation. For a detailed investigation of regional characteristics of climate change in the Yangtze River Basin during 2011–2050, the multi-model ensembles produced by an upgraded REA method are carried out for more reliable projections. The projected precipitation and temperature show large spatial variability in the Yangtze River Basin. Mean precipitation will increase under the A1B and B1 scenarios and decrease under the A2 scenario, with linear trends ranging from ?21 to 28.5?mm/decade. Increasing mean temperature can be found in all scenarios with linear trends ranging from 0.15 to 0.48°C/decade. Grids in the head region of the Jingshajiang catchment show distinct increasing trends for all scenarios. Some physical processes associated with precipitation are not well represented in the models.     

Channelized and hillslope sediment transport and the geomorphology of mountain belts

This paper uses the results of landscape evolution models and morphometric data from the Andes of northern Peru and the eastern Swiss Alps to illustrate how the ratio between sediment transport on hillslopes and in channels influences landscape and channel network morphologies and dynamics. The headwaters of fluvial- and debris-flow-dominated systems (channelized processes) are characterized by rough, high-relief, highly incised surfaces which contain a dense and hence a closely spaced channel network. Also, these systems tend to respond rapidly to modifications in external forcing (e.g., rock uplift and/or precipitation). This is the case because the high channel density results in a high bulk diffusivity. In contrast, headwaters where landsliding is an important sediment source are characterized by a low channel density and by rather straight and unstable channels. In addition, the topographies are generally smooth. The low channel density then results in a relatively low bulk diffusivity. As a consequence, response times are greater in headwaters of landslide-dominated systems than in highly dissected drainages. The Peruvian and Swiss case studies show how regional differences in climate and the litho-tectonic architecture potentially exert contrasting controls on the relative importance of channelized versus hillslope processes and thus on the overall geomorphometry. Specifically, the Peruvian example illustrates to what extent the storminess of climate has influenced production and transport of sediment on hillslopes and in channels, and how these differences are seen in the morphometry of the landscape. The Swiss example shows how the bedding orientation of the bedrock drives channelized and hillslope processes to contrasting extents, and how these differences are mirrored in the landscape. An erratum to this article can be found at     

Behavior of epidote at high pressure and high temperature: a powder diffraction study up to 10 GPa and 1,200 K

The thermo-elastic behavior of a natural epidote [Ca_1.925 Fe_0.745Al_2.265Ti_0.004Si_3.037O₁₂(OH)] has been investigated up to 1,200 K (at 0.0001 GPa) and 10 GPa (at 298 K) by means of in situ synchrotron powder diffraction. No phase transition has been observed within the temperature and pressure range investigated. P–V data fitted with a third-order Birch–Murnaghan equation of state (BM-EoS) give V ₀ = 458.8(1)ų, K _T0 = 111(3) GPa, and K′ = 7.6(7). The confidence ellipse from the variance–covariance matrix of K _T0 and K′ from the least-square procedure is strongly elongated with negative slope. The evolution of the “Eulerian finite strain” vs “normalized stress” yields Fe(0) = 114(1) GPa as intercept values, and the slope of the regression line gives K′ = 7.0(4). The evolution of the lattice parameters with pressure is slightly anisotropic. The elastic parameters calculated with a linearized BM-EoS are: a ₀ = 8.8877(7) Å, K _T0(a) = 117(2) GPa, and K′(a) = 3.7(4) for the a-axis; b ₀ = 5.6271(7) Å, K _T0(b) = 126(3) GPa, and K′(b) = 12(1) for the b-axis; and c ₀ = 10.1527(7) Å, K _T0(c) = 90(1) GPa, and K’(c) = 8.1(4) for the c-axis [K _T0(a):K _T0(b):K _T0(c) = 1.30:1.40:1]. The β angle decreases with pressure, β_P(°) = β_P0 −0.0286(9)P +0.00134(9)P ² (P in GPa). The evolution of axial and volume thermal expansion coefficient, α, with T was described by the polynomial function: α(T) = α₀ + α₁ T ^−1/2. The refined parameters for epidote are: α₀ = 5.1(2) × 10⁻⁵ K⁻¹ and α₁ = −5.1(6) × 10⁻⁴ K^1/2 for the unit-cell volume, α₀(a) = 1.21(7) × 10⁻⁵ K⁻¹ and α₁(a) = −1.2(2) × 10⁻⁴ K^1/2 for the a-axis, α₀(b) = 1.88(7) × 10⁻⁵ K⁻¹ and α₁(b) = −1.7(2) × 10⁻⁴ K^1/2 for the b-axis, and α₀(c) = 2.14(9) × 10⁻⁵ K⁻¹ and α₁(c) = −2.0(2) × 10⁻⁴ K^1/2 for the c-axis. The thermo-elastic anisotropy can be described, at a first approximation, by α₀(a): α₀(b): α₀(c) = 1 : 1.55 : 1.77. The β angle increases continuously with T, with β_T(°) = β_T0 + 2.5(1) × 10⁻⁴ T + 1.3(7) × 10⁻⁸ T ². A comparison between the thermo-elastic parameters of epidote and clinozoisite is carried out.     

Controls on event runoff coefficients in the eastern Italian Alps

Analyses of event runoff coefficients provide essential insight on catchment response, particularly if a range of catchments and a range of events are compared by a single indicator. In this study we examine the effect of climate, geology, land use, flood types and initial soil moisture conditions on the distribution functions of the event runoff coefficients for a set of 14 mountainous catchments located in the eastern Italian Alps, ranging in size from 7.3 to 608.4 km². Runoff coefficients were computed from hourly precipitation, runoff data and estimates of snowmelt. A total of 535 events were analysed over the period 1989–2004. We classified each basin using a “permeability index” which was inferred from a geologic map and ranged from “low” to “high permeability”. A continuous soil moisture accounting model was applied to each catchment to classify ‘wet’ and ‘dry’ initial soil moisture conditions. The results indicate that the spatial distribution of runoff coefficients is highly correlated with mean annual precipitation, with the mean runoff coefficient increasing with mean annual precipitation. Geology, through the ‘permeability index’, is another important control on runoff coefficients for catchments with mean annual precipitation less than 1200 mm. Land use, as indexed by the SCS curve number, influences runoff coefficient distribution to a lesser degree. An analysis of the runoff coefficients by flood type indicates that runoff coefficients increase with event snowmelt. Results show that there exists an intermediate region of subsurface water storage capacity, as indexed by a flow–duration curve-based index, which maximises the impact of initial wetness conditions on the runoff coefficient. This means that the difference between runoff coefficients characterised by wet and dry initial conditions is negligible both for basins with very large storage capacity and for basins with small storage capacity. For basins with intermediate storage capacities, the impact of the initial wetness conditions may be relatively large.     

The Vema Transverse Ridge (Central Atlantic)

Transverse ridges are elongate reliefs running parallel and adjacent to transform/fracture zones offsetting mid-ocean ridges. A major transverse ridge runs adjacent to the Vema transform (Central Atlantic), that offsets the Mid-Atlantic Ridge by 320 km. Multibeam morphobathymetric coverage of the entire Vema Transverse ridge shows it is an elongated (300 km), narrow (<30 km at the base) relief that constitutes a topographic anomaly rising up to 4 km above the predicted thermal contraction level. Morphology and lithology suggest that the Vema Transverse ridge is an uplifted sliver of oceanic lithosphere. Topographic and lithological asymmetry indicate that the transverse ridge was formed by flexure of a lithospheric sliver, uncoupled on its northern side by the transform fault. The transverse ridge can be subdivided in segments bound by topographic discontinuities that are probably fault-controlled, suggesting some differential uplift and/or tilting of the different segments. Two of the segments are capped by shallow water carbonate platforms, that formed about 3–4 m.y. ago, at which time the crust of the transverse ridge was close to sea level. Sampling by submersible and dredging indicates that a relatively undisturbed section of oceanic lithosphere is exposed on the northern slope of the transverse ridge. Preliminary studies of mantle-derived ultramafic rocks from this section suggest temporal variations in mantle composition. An inactive fracture zone scarp (Lema fracture zone) was mapped south of the Vema Transverse ridge. Based on morphology, a fossil RTI was identified about 80 km west of the presently active RTI, suggesting that a ridge jump might have occurred about 2.2 m.a. Most probable causes for the formation of the Vema Transverse ridge are vertical motions of lithospheric slivers due to small changes in the direction of spreading of the plates bordering the Vema Fracture Zone.     

Robustness and the Paradox of Bridging Organizations: The Exit Problem in Regional Water Governance Networks in Central America

Bridging organizations facilitate a range of governance processes, including cooperation and social learning, and are theorized to be a key component of robust governance systems. In this article, we use node removal simulations to test structural hypotheses of robustness in a regional water governance network in Central America. We investigate the response of network measures supporting core governance processes to the targeted removal of bridging organizations and other actors, which we compare to random and centrality-based simulations. The results indicate removing bridging organizations has a greater impact on the network than any other type of actor, suggesting bridging organizations are critical to the robustness of the governance system. Furthermore, network structures supporting cooperation may be less robust than structures facilitating social learning. We conclude with policy implications of the research findings as they relate to the exit problem in governance systems with a large presence of international development actors.     

Latitudinal variation in the aerial/aquatic ratio of oxygen consumption of a supratidal high rocky‐shore crab

The colonisation of the terrestrial environment by crustaceans is more apparent in tropical latitudes because of the high diversity of semi‐terrestrial and terrestrial crabs. However, in temperate regions there are also great numbers of crustaceans that inhabit ecological niches at the water–air interface. Grapsidae crabs (Decopoda) are especially important in studies of water‐to‐land transition as the family contains species occupying the intertidal and adjacent regions. A way to evaluate the ability of intertidal invertebrates to breathe air is to measure the aerial/aquatic oxygen consumption ratio. The objective of this study was to test the effect of thermal variation on the aquatic and aerial metabolism. We selected as study model the decopoda crab Cyclograpsus cinereus Dana and utilised five populations of the species spread over 2000 km along the Chilean coast. To determine the compensation capacity in respiration with respect to latitude, we evaluated metabolic rate at the same temperature in a common garden design in the laboratory, to examine the extent to which variation in crab physiology is environmentally determined. Whereas in our study, m_b (body mass) varied significantly with latitude, the difference in mass‐independent metabolism both in air and water persisted, indicating that observed differences in MR (Metabolic Rate) were not an effect of differences in body size. We demonstrated that C. cinereus is able to breath oxygen from air and water as expected for an amphibious crab. Almost all the studied populations of C. cinereus show a aerial/aquatic metabolism ratio near 1. The pattern found indicates an increase in metabolic rate, both aerial and aquatic, in low latitudes and therefore does not support the latitudinal compensation hypothesis for temperate habitats. Finally, these kinds of studies are required to make the necessary link between ecological physiology and macroecology and to help develop a global understanding of organismal function in marine systems.