Sensitivity of simulated flow fields and bathymetries in meandering channels to the choice of a morphodynamic model

Morphodynamic models are used by river practitioners and scientists to simulate geomorphic change in natural and artificial river channels. It has long been recognized that these models are sensitive to the choice of parameter values, and proper calibration is now common practice. This paper investigates the less recognized impact of the choice of the model itself. All morphodynamic models purport to simulate the same flow and sediment dynamics, often relying on the same governing equations. Yet in solving these equations, the models have different underlying assumptions, for example regarding spatial discretization, turbulence, sediment inflow, lateral friction, and bed load transport. These differences are not always considered by the average model user, who might expect similar predictions from calibrated models. Here, a series of numerical simulations in meandering channels was undertaken to test whether six morphodynamic codes (BASEMENT, CCHE‐2D, NAYS, SSIIM‐1, TELEMAC‐2D and TELEMAC‐3D) would yield significantly different equilibrium bathymetries if subjected to identical, initial flow conditions. We found that, despite producing moderately similar velocity patterns on a fixed‐flat bed (regression coefficient r of 0.77 ± 0.20), the codes disagree substantially with respect to simulated bathymetries (r = 0.49 ± 0.31). We relate these discrepancies to differences in the codes' assumptions. Results were configuration specific, i.e. codes that perform well for a given channel configuration do not necessarily perform well with higher or lower sinuosity configurations. Finally, limited correlation is found between accuracy and code complexity; the inclusion of algorithms that explicitly account for the effects of local bed slope and channel curvature effects on transport magnitude and direction does not guarantee accuracy. The range of solutions obtained from the evaluated codes emphasizes the need for carefully considering the choice of code. We recommend the creation of a central repository providing universal validation cases and documentation of recognized fluvial codes in commonly studied fluvial settings. Copyright © 2016 John Wiley & Sons, Ltd.     

An integrated approach for investigating geomorphic response to extreme events: methodological framework and application to the October 2011 flood in the Magra River catchment,Italy

A high‐magnitude flash flood, which took place on 25 October 2011 in the Magra River catchment (1717 km²), central‐northern Italy, is used to illustrate some aspects of the geomorphic response to the flood. An overall methodological framework is described for using interlinked observations and analyses of the geomorphic impacts of an extreme event. The following methods and analyses were carried out: (i) hydrological and hydraulic analysis of the event; (ii) sediment delivery by event landslide mapping; (iii) identification and estimation of wood recruitment, deposition, and budgeting; (iv) interpretation of morphological processes by analysing fluvial deposits; (v) remote sensing and geographic information system (GIS) analysis of channel width changes. In response to the high‐magnitude hydrological event, a large number of landslides occurred, consisting of earth flows, soil slips, and translational slides, and a large quantity of wood was recruited, in most part deriving from floodplain erosion caused by bank retreat and channel widening. The most important impact of the flood event within the valley floor was an impressive widening of the overall channel bed and the reactivation of wide portions of the pre‐event floodplain. Along the investigated (unconfined or partly confined) streams (total investigated length of 93.5 km), the channel width after the flood was up to about 20 times the channel width before the event. The study has shown that a synergic use of different methods and types of evidence provides fundamental information for characterizing and understanding the geomorphic effects of intense flood events. The prediction of geomorphic response to a flood event is still challenging and many limitations exist; however a robust geomorphological analysis can contribute to the identification of the most critical reaches. Copyright © 2016 John Wiley & Sons, Ltd.     

Microseismicity induced during fluid-injection: A case study from the geothermal site at Groß Schönebeck,North German Basin

The technical feasibility of geothermal power production in a low enthalpy environment will be investigated in the geothermal site at Groß Schönebeck, North German Basin, where a borehole doublet was completed in 2007. In order to complete the Enhanced Geothermal System, three massive hydraulic stimulations were performed. A seismic network was deployed including a single 3-component downhole seismic sensor at only 500 m distance to the injection point. Injection rates reached up to 9 m³/min and the maximum injection well-head pressure was as high as ～60 MPa. A total of 80 very small (?1.8 < M _W < ?1.0) induced seismic events were detected. The hypocenters were determined for 29 events. The events show a strong spatial and temporal clustering and a maximum seismicity rate of 22 events per day. Spectral parameters were estimated from the downhole seismometer and related to those from other types of induced seismicity. The majority of events occurred towards the end of stimulation phases indicating a similar behavior as observed at similar treatments in crystalline environments but in our case at a smaller level of seismic activity and at lower magnitudes.     

Detecting short-term evolution of Etnean scoria cones: a LIDAR-based approach

The 2001 and 2002–2003 flank eruptions on Mount Etna (Italy) were characterized by intense explosive activity which led to the formation of two large monogenetic scoria cones (one from each eruption) on the upper southern flank of the volcano. Continuous monitoring of Etna, especially during flank eruptions, has provided detailed information on the growth of these cones. They differ in genesis, shape, and size. A set of high resolution (1 m) digital elevation models (DEMs) derived from light detection and ranging (LIDAR) data collected during four different surveys (2004, 2005, 2006, and 2007) has been used to map morphology and to extract the morphometric parameters of the scoria cones. By comparing LIDAR-derived DEMs with a pre-eruption (1998) 10 m DEM, the volume of the two scoria cones was calculated for the first time. Comparison of the LIDAR-derived DEMs revealed in unprecedented detail morphological changes during scoria cone degradation. In particular, the morphologically more exposed and structurally weaker 2002–2003 cone was eroded rapidly during the first few years after its emplacement mainly due to gravitational instability of slopes and wind erosion.     

A toxicity identification evaluation of silty marine harbor sediments to characterize persistent and non-persistent constituents

Sediment toxicity in silty marine harbor sediments is frequently dominated by ammonia or sulfide, leaving the adverse effects of persistent toxic substances unnoticed. To investigate the latter, we subjected interstitial water from three contaminated silty sediments to toxicity identification evaluation (TIE) phase I manipulations and tested for toxicity with four bioassays: the amphipod Corophium volutator (survival as an endpoint), the sea urchin Psammechinus miliaris (fertilization, embryo development) and the bacterium Vibrio fischeri (bioluminescence inhibition).The graduated pH manipulations identified the prominent toxicity of ammonia in the amphipod and sea urchin embryo tests, and also sulfide toxicity in the bacterium test. In two of the three samples tested with the amphipods, sea urchin embryos and bacteria, a small but significant reduction in interstitial water toxicity was achieved by removing persistent compounds through C(18) solid phase extraction. EDTA chelation resulted in a slight detoxification of the interstitial water for the amphipods and sea urchin embryos, but this was not related to any measured trace metals. Despite the presence of toxic levels of ammonia and sulfide in the harbor sediments, we established the adverse biological effects of persistent constituents by means of the TIE manipulations and in vivo interstitial water bioassays.     

Inorganic nitrogen control in wastewater treatment ponds from a fish farm (Orbetello, Italy): denitrification versus Ulva uptake

The aim of this study was to quantify the N removal efficiency of an Ulva-based phytotreatment system receiving wastewaters from a land-based fish farm (Orbetello, Italy), to identify the main biogeochemical pathways involved and to provide basic guidelines for treatment implementation and management. Fluxes of O2 and nutrients in bare and in Ulva colonised sediments were assessed by light/dark core incubations; denitrification by the isotope pairing technique and Ulva growth by in situ incubation of macroalgal disks in cages. O2 and nutrient budgets were estimated as sum of individual processes and further verified by 24-h investigations of overall inlet and outlet loads. Ulva uptake (up to 7.8 mmol Nm(-2) h(-1)) represented a net sink for water column and regenerated NH4+ whilst N removal via denitrification (10-170 micromol Nm(-2) h(-1)) accounted for a small percentage of inorganic nitrogen load (<5%). Laboratory experiments demonstrated a high potential for denitrification (over 800 microM Nm(-2) h(-1)) indicating that N loss could be enhanced. The control of Ulva standing stocks by optimised harvesting of surplus biomass may represent an effective strategy to maximise DIN removal and could result in the assimilation of approximately 50% of produced inorganic nitrogen.     

Structural setting and tectonic evolution of the Apennine Units of northern Calabria

A new structural–stratigraphic synthesis of the Apennine units of northern Calabria is presented. The Meso-Cenozoic successions are grouped into two tectonic units, named Pollino–Ciagola Unit (PCU) and Lungro–Verbicaro Unit (LVU), comprising terrains formerly attributed to five different tectonic units. FeMg carpholite and blue amphibole record HP–LT metamorphism in the LVU, followed by progressive decompression leading to final greenschist facies re-equilibration during dominantly extensional deformation. Final tectonic emplacement of the LVU over the PCU post-dated the metamorphism of the LVU and was accompanied by intense ductile deformation along zones of strain localisation in footwall rocks. All of the units were later affected by folding and minor thrusting during subsequent Apennine tectonics. To cite this article: A. Iannace et al., C. R. Geoscience 337 (2005).     

Facing the challenge of shrinking cities in East Germany: The case of Leipzig

In the early 20^th century, the East German city of Leipzig seemed well on its way to become a metropolis of international importance. The city was expected to grow towards over one million inhabitants in 2000. Seventy years later, Leipzigs population has shrunk to less than 500,000 inhabitants instead. The German partition after World War II took away most of its national administrative and economic functions and much of its hinterland. The socialist GDR regime worsened the long-term development perspectives and living circumstances of the city. The German reunification brought new development chances, but like most East German cities, Leipzigs hopes soon became disappointed. The local politicians faced a difficult redevelopment task: apart from the question how to revive the local and regional economy, they also had to deal with a housing vacancy rate of 20%, a huge need for renovation in the older neighbourhoods as well as in the socialist high-rise areas, the negative effects of urban sprawl on the city core, and various environmental pollution problems. After briefly describing the development path of Leipzig until the 1990s, the paper will discuss the current attempts of the city government to give Leipzig a more positive post-industrial future. On the one hand, Leipzig is developing a strategy to downsize the citys built environment and infrastructure to adapt to a probably lastingly smaller population. On the other hand, many growth instruments well known from the international scientific and political debate are tried to put Leipzig back on the (inter)national map. The paper will discuss these development strategies in the light of the international debate on the question how to fight the shrinking city, with specific attention for post-socialist cities.