Long term shoreline oscillation and changes of Cauvery delta coastline inferred from satellite imageries

Coastal zone is highly volatile ecosystem which is always in adjustments. Loss of shore line will cause severe impact on human life and as well as their properties. Remote sensing is a reliable technique to study the historical shoreline changes. Therefore in this paper long term shoreline oscillations of Cauvery delta shorelines at Poompuhar, Tharangambadi and Nagapattinam were studied using satellite imageries and the same was physically observed at the above three locations with the help of reference pillars and compared mutually. It was observed that the shoreline at Poompuhar is under accretion at the rate of 1.79m/ year and other shoreline stretches at Tharangambadi and Nagapattinam were under erosion at 0.4888m/ year and 0.4985m/ year respectively. It was also observed that the remote sensing study qualitatively matches with the physical observation for all the three coastal stretches of the study area.     

Using gravity and topography-implied anomalies to assess data requirements for precise geoid computation

Many regions around the world require improved gravimetric data bases to support very accurate geoid modeling for the modernization of height systems using GPS. We present a simple yet effective method to assess gravity data requirements, particularly the necessary resolution, for a desired precision in geoid computation. The approach is based on simulating high-resolution gravimetry using a topography-correlated model that is adjusted to be consistent with an existing network of gravity data. Analysis of these adjusted, simulated data through Stokes’s integral indicates where existing gravity data must be supplemented by new surveys in order to achieve an acceptable level of omission error in the geoid undulation. The simulated model can equally be used to analyze commission error, as well as model error and data inconsistencies to a limited extent. The proposed method is applied to South Korea and shows clearly where existing gravity data are too scarce for precise geoid computation.     

A hierarchical model for estimating methane emission from wetlands using MODIS data and ARIMA modeling

A three-step hierarchical Semi Automated Empirical Methane Emission Model (SEMEM) has been used to estimate methane emission from wetlands and waterlogged areas in India using Moderate Resolution Imagine Spectroradiometer (MODIS) sensor data onboard Terra satellite. Wetland Surface Temperature (WST), methane emission fluxes and wetland extent have been incorporated as parameters in order to model the methane emission. Analysis of monthly MODIS data covering the whole of India from November 2004 to April 2006 was carried out and monthly methane emissions have been estimated. Interpolation techniques were adopted to fill the data gaps due to cloudy conditions during the monsoon period. AutoRegressive Integrated Moving Average (ARIMA) model has been fitted to estimate the emitted methane for the months of May 2006 to August 2006 using SPSS software.     

CPLat: first operational experimental processing center for SIRGAS in Argentina

The SIRGAS permanent GPS network which is in fact the IGS network densification for the American continent, consists today of more than 200 stations covering the continent and islands. It is currently processed by the IGS RNAAC SIR centre at Deutsches Geodätisches Forschungsinstitut producing weekly free solutions relying on IGS final orbits and EOP that contribute to the ITRF through IGS. By August 2006, the SIRGAS Working Group I had accepted five proposals for experimental processing centers within the region that would collaborate with IGS RNAAC SIR. One of them, Centro de Procesamiento La Plata (CPLat) in Argentina, began processing 60 stations on October 2006. By January 2007 CPLat reached operational capability, delivering weekly free solution SINEX files, with an internal consistency of 1.5 mm average for the horizontal components, and 3 mm in the vertical. Comparisons with IGS global and IGS RNAAC SIR weekly solutions were taken as external consistency indications, showing average RMS residuals of 1.8, 2.4 and 5 mm for the north, east, and vertical component, respectively. Analysis and comparison of adjusted solution time series from CPLat and other processing centers has proved to be highly valuable for solution QC, namely detection and identification of station anomalous behavior or modelling problems. These procedures will ensure the maintenance of the performance specifications for CPLat solutions. Action is being taken in order to guarantee the continuity of this effort beyond the experimental phase.     

An approach to aid INS using time-differenced GPS carrier phase (TDCP) measurements

This paper presents a simple and effective approach that incorporates single-frequency, L1 time-differenced GPS carrier phase (TDCP) measurements without the need of ambiguity resolution techniques and the complexity to accommodate the delayed-state terms. Static trial results are included to illustrate the stochastic characteristics and effectiveness of the TDCP measurements in controlling position error growth. The formulation of the TDCP observation model is also described in a 17-state tightly-coupled GPS/INS iterative, extended Kalman filter (IEKF) approach. Preliminary land vehicle trial results are also presented to illustrate the effectiveness of the TDCP which provides sub-meter positional accuracies when operating for more than 10 min.     

Urban cadastral mapping using very high resolution remote sensing data

With growing urban expanses, one of the pre-requisites for effective governance is Urban Information Systems (UIS) with content down to individual properties (and individuals). The basic input i.e., a map, in UIS should show individual property boundaries showing the plan outline of all structures existing within, at a scale of 1:1000 and larger with sub-metre to centimeters planimetric and geometric accuracy. With very high resolution remote sensing data of the order of 1m available in hand, it is possible to prepare maps with high resolution spatial content. The present exercise demonstrates a method of preparing a geometrically and planimetrically accurate urban cadastral map on very large scale for a small area of about 5 sq km. IKONOS merged data with 1m resolution is used for the purpose. Mapping was done in conjunction with on-site measurements and sketches. Guides are used to maintain shape symmetry and accuracy of buildings and other features. Working out cost of mapping per unit area is another objective in the present exercise. For want of fully or semi-automatic methods of information extraction from very high resolution remote sensing data, it is imperative that mapping should be carried out in conjunction with some on-site measurements wherever necessary.     

Use of laser range and height texture cues for building identification

Airborne LiDAR has found application in an increasing number of mapping and Geo-data acquisition tasks. Apart from terrain information generation, applications such as automatic detection and modeling of objects like buildings or vegetation for the generation of 3-D city models have been explored. Besides the height itself, height texture defined by local variations of the height is a significant parameter for object recognition. The paper explores the potential of the analysis of height texture as a cue for the automatic detection of objects in LiDAR datasets. A number of texture measures were computed. Based on their definition and computation these measures were used as bands in a classification algorithm, and objects like buildings, single trees, and roads could be recognized.     

A study on the reference frame consistency in recent Earth gravitational models

All gravity field functionals obtained from an Earth gravitational model (EGM) depend on the underlying terrestrial reference frame (TRF), with respect to which the EGM’s spherical harmonic coefficients refer to. In order to maintain a coherent framework for the comparison of current and future EGMs, it is thus important to investigate the consistency of their inherent TRFs, especially when their use is intended for high precision studies. Following the methodology described in an earlier paper by Kleusberg (1980), the similarity transformation parameters between the associated reference frames for several EGMs (including the most recent CHAMP/GRACE models at the time of writing this paper) are estimated in the present study. Specifically, the differences between the spherical harmonic coefficients for various pairs of EGMs are parameterized through a 3D-similarity spatial transformation model that relates their underlying TRFs. From the least-squares adjustment of such a parametric model, the origin, orientation and scale stability between the EGMs’ reference frames can be identified by estimating their corresponding translation, rotation and scale factor parameters. Various aspects of the estimation procedure and its results are highlighted in the paper, including data weighting schemes, the sensitivity of the results with respect to the selected harmonic spectral band, the correlation structure and precision level of the estimated transformation parameters, the effect of the estimated differences of the EGMs’ reference frames on their height anomaly signal, and the overall feasibility of Kleusberg’s formulae for the assessment of TRF inconsistencies among global geopotential models.