Urban development and flooding in Houston Texas, inferences from remote sensing data using neural network technique

The effects of urban development on the natural ecosystem and its link to the increased flooding in Houston, Texas were evaluated. Houston is suitable for this type of analysis due to its 1.95 million population, large geographic area and fast growth rate. Using neural network techniques, four Landsat Thematic Mapper images were grouped into five land use classes for the period 1984 to 2003: vegetation, bare ground, water, concrete and asphalt. Results show that asphalt and concrete increased 21% in the time period 1984–1994, 39% in 1994–2000 and 114%, from 2000 to 2003, while vegetation suffered an overall decrease. When change detection data are compared with runoff ratio data, a relationship between increased runoff and urban development is apparent, which indicates increased chances of flooding. Initial results of this work are made available to the public in GIS format via internet using Arc Internet Map Server (ArcIMS) at .     

Soil responses near Delhi ridge and adjacent regions in Greater Delhi during incidence of a local earthquake

In this study, soil response was carried out for the Greater Delhi region. A folded Proterozoic formation was identified as Delhi ridge, passes through its central part along SSW–NNE direction, and appears to be a main geomorphic feature for the study area. The Delhi ridge is an exposed quartzite rock of about 10–100 m wide and ~25 km long with gentler dipping both toward east and west. We have considered the exposed part as an outcrop side near the ridge axis and the dipping area as rigid base away from the ridge axis for ground motion study during the occurrence of the 25 November 2007 earthquake with magnitude M _L 4.3 (Richter scale) that occurred at Delhi–Haryana State boundary. The degree of shaking was very strong and reported major cracks in the buildings near the epicenter area. We have studied the soil response parameters at the surface level, considering horizontally stratified soil layers above rigid base. The equivalent linear method was used for soil response analysis at 25 sites in Greater Delhi area. The peak amplification factors vary from 3.2 to 5.9 and peak resonance frequency varies from 1.2 to 5.3 Hz. The correlation among the peak amplification factor (A) and frequency (f) was empirically established as A = 0.36f + 3.60. Increasing peak amplification factor was found at sites with increasingly thicker alluvium deposit with lower frequency contains ground motion and vice versa. Seismic zoning map was also reconstructed for peak amplification factors and predominant periods for the study area for the mitigation purposes of earthquake damage. The average shear wave velocity up to 30 m soil depth is also obtained for site classification. The average velocity to 30 m [ $ \overline{{V_{\text{s}} }} (30) $ ] is a widely used parameter for classifying sites for predicting their potentiality to amplify seismic shaking. A lower value [ $ \overline{{V_{\text{s}} }} (30) $ ] thus yields a more conservative estimate of ground motion, which generally increases as $ \overline{{V_{\text{s}} }} (30) $ decreases. Present estimate of $ \overline{{V_{\text{s}} }} (30) $ varies from 315 to 419 m/s. In this study, we have identified two site classes C and D, as per National Earthquake Hazard Reduction Program. The city planner or engineers can directly use these data for site-specific assessment during retrofitting of the existing structure, demolition of the old buildings and design a new structure to avoid major destruction of the buildings due to future earthquake.     

Is area affected by flood or stagnant water independently associated with poorer health outcomes in urban slums of Dhaka and adjacent rural areas?

This study investigated the association of flood/stagnant water (FSW) with various health outcomes among respondents living in urban slums of Dhaka and adjacent rural areas. We also assessed the differences of individual-, household- and area-level characteristics between the FSW-affected and non-affected areas. Bangladesh as a whole and slums in the megacity of Dhaka in particular are severely affected by the FSW. Data were collected from 3,207 subjects (aged 10+ years) through baseline surveys conducted in March 2008 and 2009. Twelve big slums in Dhaka and three adjacent villages were selected as study areas. Face-to-face interviews using a multidimensional pre-tested questionnaire were conducted by the trained university graduates. We performed various types of analyses ranging from the simple frequency analysis to the multivariable-adjusted logistic regression modelling. Our empirical findings suggest that slums were more affected by the FSW as compared to the rural areas. People living in the FSW-affected areas were more vulnerable in terms of individual-, household- and area-level characteristics than non-affected people. Age was also significantly associated with various health outcomes. According to multivariable analyses controlled for various factors, the FSW-affected people reported significantly higher likelihoods of health symptoms (namely fever, cold/cough, weakness), communicable diseases (namely diarrhoea and gastric disease) and poor mental well-being as compared to the non-affected people. Only the burden of non-communicable diseases was lower in the FSW-affected areas than the non-affected areas. Our findings lead us to conclude that the FSW-affected area is an independent risk factor for various physical and mental health problems. Urban slums are more affected than rural areas by the FSW. Therefore, we underscore the necessities of well-designed and comprehensive public health interventions focusing on individual, community and higher levels of interventions to reduce the FSW-related health and other consequences among the people living in the FSW-affected areas and urban slums in the rapidly growing city of Dhaka, Bangladesh.     

Potassium induced salinity tolerance in wheat (Triticum aestivum L.)

Water culture experiments were conducted to study the response of ten wheat genotypes to external K application (10 mmol KCI dm^?3) at seedling stage under saline condition (0 and 100 mmol NaCl dm^?3). The data showed that there was an increase in the shoot and root length with the application of external K. The increase was more pronounced under control than under saline conditions. The better performing genotypes under two treatments were Bhitai, NIAB-41, NIAB-I076 and Khirman. The enhanced growth of these genotypes under saline condition might be due to the quick response to external K application, resulting in high K/Na ratio. The results indicated that the genotypes, which have the ability of enhanced K/Na discrimination, might perform better under saline conditions when sufficient potassium is applied in the rooting medium.     

Dynamic analysis of strain localization in water‐saturated clay using a cyclic elasto‐viscoplastic model

A computational framework is presented for dynamic strain localization and deformation analyses of water‐saturated clay by using a cyclic elasto‐viscoplastic constitutive model. In the model, the nonlinear kinematic hardening rule and softening due to the structural degradation of soil particles are considered. In order to appropriately simulate the large deformation phenomenon in strain localization analysis, the dynamic finite element formulation for a two‐phase mixture is derived in the updated Lagrangian framework. The shear band development is shown through the distributions of viscoplastic shear strain, the axial strain, the mean effective stress, and the pore water pressure in a normally consolidated clay specimen. From the local stress–strain relations, more brittleness is found inside the shear bands than outside of them. The effects of partially drained conditions and mesh‐size dependency on the shear banding are also investigated. The effect of a partially drained boundary is found to be insignificant on the dynamic shear band propagation because of the rapid rate of applied loading and low permeability of the clay. Using the finer mesh results in slightly narrower shear bands; nonetheless, the results manifest convergency through the mesh refinement in terms of the overall shape of shear banding and stress–strain relations. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of biochar from sugarcane filter-cake and its impacts on physiological performance of lettuce (<Emphasis Type="Italic">Lettuce sativa</Emphasis>) grown on cadmium contaminated soil

Soil contamination with cadmium has become major concern all over the world because of its adverse impacts on ecosystem health and agricultural land. Soil amendment with biochar may have varied effects on physical and chemical properties of soil. The objective of the study was to explore the impact of sugarcane filter-cake biochar on physiological performance and growth of lettuce in an aged soil. Four different doses (0, 1.5%, 3%, and 5%) of biochar were used in the soil and conditioned for 1 month. After this, lettuce seedlings were grown in the soil. The results showed that the biochar treatment improved the fresh and dry biomass of leaves and roots as well as plant height while diminished the bioavailability of cadmium from the soil. As compared to control, biochar significantly enhanced the chlorophyll content in lettuce leaves. Due to the biochar amendment, the oxidative stress decreased in lettuce shoots over the control. As compared to control, concentration of cadmium in lettuce significantly decreased after the application of biochar. It was concluded that biochar could mitigate the toxicity of cadmium in lettuce by altering the biochemical and physiological processes in cadmium contaminated soil.     

Occurrence of scheelite-powellite in the rocks of Mahakoshal Group, Wyndhamganj area, Sonbhadra district, Uttar Pradesh

Scheelite and Powellite occur as dissemination and fractures filling in the hornfels and tourmaline-garnet granite in the Palaeoproterozoic rocks of Mahakoshal Group, at about 2.5 km north of Wyndhamganj, Sonbhadra district, Uttar Pradesh. This new find opens new vistas for the search of tungsten mineralization along the contact zones of Mahakoshal Group and the younger granite.     

Nutrient and metal accumulation in a freshwater tidal marsh

Stratigraphic records from sediment cores collected in a freshwater tidal marsh and in the estuary upstream and downstream from the marsh were used to determine the accumulation of nutrients and trace metals over long time periods. Analysis of pollen and seeds show that the high marsh has formed only within the past 100 yr, following increased sedimentation rates in the area. Variations in nutrient and trace metal accumulations over several decades show that pollutants from agricultural runoff and wastewater discharge are stored to a greater extent in high-marsh than in low-marsh sediments. Greater accumulation rates in the high marsh are probably related to its greater sedimentary organic carbon concentration.     

Gravity anomalies,flexure, and deformation of the converging Indian lithosphere in Nepal and Sikkim–Darjeeling Himalayas

Researchers ubiquitously noted that the common processes of partitioning oblique convergence in response to drag from the trench-hanging plate simultaneously produce radial slips, along-strike translation, and extension parallel to the deformation front. Here, we focus on the area between Nepal and Sikkim–Darjeeling Himalayas, and carry out gravity and finite-element stress modeling of the strike-orthogonal converging Indian lithosphere. We delineate the geometries of different layers and their interfaces through gravity modeling. The optimum model parameters along with rheological parameters of different layers are used for finite-element modeling. Finite-element modeling is done with boundary conditions of keeping the upper surface free and rigidly fixing the section of the northern boundary below the Main Himalayan Thrust. We impart on its frontal section an amount of 6 × 10¹² N/m force, equivalent to resistive force of the Himalayan–Tibet system, and analyze the maximum and minimum compressive stress fields evolved in the lithosphere. We testify our observations with earthquake database and other geophysical and geological studies. We note that an increasing flexing of the Indian lithosphere beyond the Main Boundary Thrust becomes maxima between the Main Central Thrust and South Tibetan Detachment in both the areas; however, more steepening of the Moho boundary is identified in the Sikkim–Darjeeling Himalaya. This abrupt change in lithospheric geometry beneath the Greater Himalaya is likely correlated with the sharp elevation changes in the topography. Although the highest seismicity concentration is dominant in this zone, the Lesser and the Tethys Himalayas in Sikkim–Darjeeling area also record relatively fair seismic activity. More compressive stress field in different layers right within the sharp bending zone supports this observation. We thus propose that the sharp bending zone beneath the Greater Himalaya is suffering maximum deformation, and the deformation is continued in the mantle too. We also identify both right-lateral shear and radial vergence slip, which are presumably associated with the general dynamics and kinematics of the Himalaya.     

Reflectance spectroscopy and remote sensing data for finding sulfide-bearing alteration zones and mapping geology in Gilgit-Baltistan,Pakistan

Gilgit-Baltistan region is covering the northern most part of Pakistan where the rocks of the Kohistan-Ladakh island arc and Karakoram plate are exposed. The area has greater potential for precious and base metals deposits which are needed to be explored through spectroscopy and remote sensing techniques. Minerals and rocks can nowadays be identified through the measurement of their absorption and reflectance features by spectroscopic analysis. Spectral reflectance analysis is also very important in selecting the appropriate spectral bands for remote-sensing data analysis of unknown or inaccessible areas. In this study, reflectance spectra in the spectral range of 0.35–2.5 μm of different types of unaltered and altered rocks found in the Machulu and Astor areas of northern Pakistan were obtained using an ASD spectroradiometer. The fresh rock samples showed low spectral reflectance as compared to the altered rock samples. The minerals jarosite, goethite, and hematite showed depth of absorption minima in the range of 0.4–1.15 μm due to the presence of iron (Fe), while jarosite and limonite showed absorption depth at 2.2 μm due to the presence of hydroxyl ions (OH^¯). The clay minerals montmorillonite and illite showed absorption depth at 1.93 and 2.1 μm, respectively. Muscovite showed depth of absorption minima at 1.4 and 1.9 μm in some samples. Calcite showed deep absorption minima at 2.32 μm, while anorthite showed absorption features at 1.4, 1.9, 2.24, and 2.33 μm. Olivine showed a slight depressed absorption feature at 1.07 μm. The copper-bearing phases malachite, chrysocolla, and azurite showed, respectively, a broad absorption feature in the range of 0.6–0.9 μm, a small absorption at 1.4 μm, and a deep absorption at 1.93 μm. The unmineralized samples exhibited high reflectance in the wavelength ranges of 0.6–0.8, 1.6–1.9, 2.0–2.3, 2.1–2.25, and 2.4–2.5 μm, respectively, while the mineralized samples showed reflectance bands in the wavelength ranges of 0.4–0.6, 1.3–1.8, and 2.1–2.2 μm. On this basis, the band ratio combinations 7/5–4/3–6/3 and 7/5–6/3–4/3 of Landsat 8 and 4/7–4/3–2/1 for ASTER data were found to be very effective in the lithological differentiation of major rock units.