Local geoid determination combining gravity disturbances and GPS/levelling: a case study in the Lake Nasser area, Aswan, Egypt

 The use of GPS for height control in an area with existing levelling data requires the determination of a local geoid and the bias between the local levelling datum and the one implicitly defined when computing the local geoid. If only scarse gravity data are available, the heights of new data may be collected rapidly by determining the ellipsoidal height by GPS and not using orthometric heights. Hence the geoid determination has to be based on gravity disturbances contingently combined with gravity anomalies. Furthermore, existing GPS/levelling data may also be used in the geoid determination if a suitable general gravity field modelling method (such as least-squares collocation, LSC) is applied. A comparison has been made in the Aswan Dam area between geoids determined using fast Fourier transform (FFT) with gravity disturbances exclusively and LSC using only the gravity disturbances and the disturbances combined with GPS/levelling data. The EGM96 spherical harmonic model was in all cases used in a remove–restore mode. A total of 198 gravity disturbances spaced approximately 3 km apart were used, as well as 35 GPS/levelling points in the vicinity and on the Aswan Dam. No data on the Nasser Lake were available. This gave difficulties when using FFT, which requires the use of gridded data. When using exclusively the gravity disturbances, the agreement between the GPS/levelling data were 0.71 ± 0.17 m for FFT and 0.63 ± 0.15 for LSC. When combining gravity disturbances and GPS/levelling, the LSC error estimate was ±0.10 m. In the latter case two bias parameters had to be introduced to account for a possible levelling datum difference between the levelling on the dam and that on the adjacent roads. Received: 14 August 2000 / Accepted: 28 February 2001     

Numerical Prediction of Induced Pressure and Lift of the Planing Surfaces

This paper discusses the numerical prediction of the induced pressure and lift of the planing surfaces in a steady motion based on the potential flow solver as well as the spray drag by use of the practical method.The numerical method for computation of the induced pressure and lift is potential-based boundary element method.Special technique is identified to present upwash geometry and to determine the spray drag.Numerical results of a planing flat plate and planing craft model 4666 are presented.It is shown that the method is robust and efficient and the results agree well with the experimental measurements with various Froude humors.     

The concept of ecological succession applied to phytoplankton over four consecutive years in five ponds featuring a salinity gradient

The distribution of phytoplankton abundance, biomass and species composition coupled with environmental factors and metazooplankton was studied relatively intensively and over a period of four consecutive years in five ponds featuring a gradient of increasing salinity from near to that of sea water to a nine-fold concentration from 2000 to 2003. The results indicate that the physical characteristics of the water (temperature and salinity) were quite similar over the years. Nutrients, which were concentrated in pond A1, decreased with increases in salt concentration. The composition of the phytoplankton community showed strong seasonality. Diatoms dominated in the first ponds A1, A16 and C2-1, followed by dinoflagellates. Chlorophyceae dominated the phytoplankton community in the hypersaline ponds M2 and TS. Cyanobacteriae were relatively abundant in ponds M2 and TS. The highest phytoplankton density and biomass were found in the ponds with the highest salinity due to the proliferation of Dunaliella salina (Chlorophyta: Volvocales). The inter-annual study of phytoplankton succession in the Sfax solar salterns showed slight differences among the years of study due to the stability of the environmental conditions. Phytoplankton communities were permanently primitive, stage 1 – structured as they failed to build complexity because of salt stress which operates for longer and above any other variables. This reduced frequency of disturbance to the existing course of regulation, allowed the community to “mature” from its “primitive” state, rather than experience frequent structural setbacks.     

Probabilistic seismic hazard assessment in the northeastern part of Algeria

This work involves updating the evaluation of seismic hazard in Northeast Algeria by a probabilistic approach. This reassessment attempts to resolve inconsistencies between seismic zoning in regional building codes and is further motivated by the need to refine the input data that are used to evaluate seismic hazard scenarios. We adopted a seismotectonic model that accounts for differences in interpretations of regional seismicity. We then performed a probabilistic assessment of regional seismic hazard in Northeast Algeria. Based on a homogeneous earthquake catalog and geological and seismotectonic data gathered in the first part of the study, a seismotectonic zoning map was created and seven risk areas were identified. For each area, peak ground acceleration hazard maps were produced. Details of the calculations are provided, including hazard curves at periods of 0.1, 0.2, 0.33, 0.5, 1.0, and 2.0 s and uniform hazard spectra at urban locations in the area, including Sétif, Constantine, Kherrata, Bejaia, and Jijel.     

Update earthquake risk assessment in Cairo,Egypt

The Cairo earthquake (12 October 1992; m _b  = 5.8) is still and after 25 years one of the most painful events and is dug into the Egyptians memory. This is not due to the strength of the earthquake but due to the accompanied losses and damages (561 dead; 10,000 injured and 3000 families lost their homes). Nowadays, the most frequent and important question that should rise is “what if this earthquake is repeated today.” In this study, we simulate the same size earthquake (12 October 1992) ground motion shaking and the consequent social-economic impacts in terms of losses and damages. Seismic hazard, earthquake catalogs, soil types, demographics, and building inventories were integrated into HAZUS-MH to produce a sound earthquake risk assessment for Cairo including economic and social losses. Generally, the earthquake risk assessment clearly indicates that “the losses and damages may be increased twice or three times” in Cairo compared to the 1992 earthquake. The earthquake risk profile reveals that five districts (Al-Sahel, El Basateen, Dar El-Salam, Gharb, and Madinat Nasr sharq) lie in high seismic risks, and three districts (Manshiyat Naser, El-Waily, and Wassat (center)) are in low seismic risk level. Moreover, the building damage estimations reflect that Gharb is the highest vulnerable district. The analysis shows that the Cairo urban area faces high risk. Deteriorating buildings and infrastructure make the city particularly vulnerable to earthquake risks. For instance, more than 90 % of the estimated buildings damages are concentrated within the most densely populated (El Basateen, Dar El-Salam, Gharb, and Madinat Nasr Gharb) districts. Moreover, about 75 % of casualties are in the same districts. Actually, an earthquake risk assessment for Cairo represents a crucial application of the HAZUS earthquake loss estimation model for risk management. Finally, for mitigation, risk reduction, and to improve the seismic performance of structures and assure life safety and collapse prevention in future earthquakes, a five-step road map has been purposed.     

Application of two fuzzy models using knowledge-based and linear aggregation approaches to identifying flooding-prone areas in Tehran

Flooding is one of the most problematic natural events affecting urban areas. In this regard, developing flooding models plays a crucial role in reducing flood-induced losses and assists city managers to determine flooding-prone areas (FPAs). The aim of this study is to investigate on the prediction capability of fuzzy analytical hierarchy process (FAHP) and Mamdani fuzzy inference system (MFIS) methods as two completely and semi-knowledge-based models to identify FPAs in Tehran, Iran. Six flooding conditioning factors including density of channel, distance from channel, land use, elevation, slope, and water discharge were extracted from various geo-spatial datasets. A total of 62 flooding locations were identified in the study area based on the existing reports and field surveys. Of these, 44 (70%) floods were randomly selected as training data and the remaining 18 (30%) cases were used for the validation purposes. After the data preparation step, data were processed by means of two statistical (FAHP) and soft computing (MFIS) methods. Unlike most statistical and soft computing approaches which use flooding inventory data for both training and evaluation of models, only conditioning factor was involved in data processing and inventory data were used in the current study to assess models prediction accuracy. Also, the efficiency of two approaches was evaluated by pixel matching (PM) and area under curve to validate the prediction capability of models. The prediction rate for MFIS and FAHP was 89% and 84%, respectively. Moreover, according to the results obtained from PM, it was found out that about 90% of known flooding locations fell in high-risk areas, whereas it was 83% for FAHP, indicating that flooding susceptibility map of MFIS has higher performance.

     

Application of Rock Mass Characterization for Determining the Mechanical Properties of Rock Mass: a Comparative Study

The results of geotechnical explorations, engineering geological investigation (including laboratory and in situ tests) and field observations have been used, along with borehole logging charts, to obtain the rock mass geotechnical data. Based on the data, the rock mass along the Sabzkuh water conveyance tunnel route was classified by rock mass rating (RMR), Q-system (Q), rock mass index (RMi) and geological strength index (GSI) (3 methods). A new series of correlations were established between the systems based on the data collected from the study area. These relationships were then compared with those reported in the literature, and two new relations were recommended. The classifications were utilized to calculate mechanical properties (rock mass strength and deformation modulus) of the rock mass along the tunnel according to available empirical relations, and to distinguish the upper-bound and lower-bound relations.     

Life-cycle cost and sustainability analysis of light-frame wood residential communities exposed to tornados

Natural Hazards - Tornadoes pose a significant threat to residential communities, causing enormous physical damage and losses to their social fabric. The dominant type of single-family residential...     

Separation of magnetic anomalies into induced and remanent magnetization contributions

Inversion of magnetic data is complicated by the presence of remanent magnetization, and it provides limited information about the magnetic source because of the insufficiency of data and constraint information. We propose a Fourier domain transformation allowing the separation of magnetic anomalies into the components caused by induced and remanent magnetizations. The approach is based on the hypothesis that each isolated source is homogeneous with a uniform and specific Koenigsberger ratio. The distributions of susceptibility and remanent magnetization are subsequently recovered from the separated anomalies. Anomaly components, susceptibility distribution and distribution of the remanent and total magnetization vectors (direction and intensity) can be achieved through the processing of the anomaly components. The proposed method therefore provides a procedure to test the hypotheses about target source and magnetic field, by verifying these models based on available information or a priori information from geology. We test our methods using synthetic and real data acquired over the Zhangfushan iron-ore deposit and the Yeshan polymetallic deposit in eastern China. All the tests yield favourable results and the obtained models are helpful for the geological interpretation.