Water Temperature Dynamics in a Complex of Reservoirs and Its Effect on the Temperature Patterns of a Mountain River

The article presents the spatial and temporal dynamics of water temperature in two reservoirs on the upper course of the Dunajec River in the Polish Carpathians. It aims at presenting how spatial patterns and time evolution of water temperature in the reservoirs affect the water temperature in the river. The analysis is based on the results of water temperature measurements in hydrometric verticals in two reservoirs as well as in the river upstream and downstream of the reservoirs. The measurements were carried out in 2012 and 2013, in hydrometeorological conditions typical for each season of the year. Based on the measurements, it has been demonstrated that the complex of reservoirs affects the water temperature in the river over the year and the existence of the smaller lower reservoir may attenuate the cooling or heating effect of the main reservoir on the river.     

The formation of an anabranching planform in a sandy floodplain by increased flows and sediment load

Anabranching rivers evolve in various geomorphic settings and various river planforms are present within these multi‐channel systems. In some cases, anabranches develop meandering patterns. Such river courses existed in Europe prior to intensive hydro‐technical works carried out during the last 250 years. Proglacial stream valleys, inherited from the last glaciation, provided a suitable environment for the development of anabranching rivers (wide valleys floors with abundant sand deposits). The main objective of the present study is to reconstruct the formation of an anabranching river planform characterized by meandering anabranches. Based on geophysical and geological data obtained from field research and a reconstruction of palaeodischarges, a model of the evolution of an anabranching river formed in a sandy floodplain is proposed. It is demonstrated that such a river system evolves from a meandering to an anabranching planform in periods of high flows that contribute to the formation of crevasse splays. The splay channels evolve then into new meandering flow paths that form ‘second‐order’ crevasses, avulsions and cutoffs. The efficiency of the flow is maintained by the formation of cutoffs and avulsions preventing the development of high sinuosity channels, and redirecting the flow to newly formed channels during maximum flow events. A comparison with other anabranching systems revealed that increased discharges and sediment loads are capable of forming anabranching planforms both in dryland and temperate climate zones. The sediment type available for transport, often inherited from older sedimentary environments, is an important variable determining whether the channel planform is anabranching, with actively migrating channels, or anastomosing, with stable, straight or sinuous branches. Copyright © 2017 John Wiley & Sons, Ltd.     

Identifying slope processes over time and their imprint in soils of medium‐high mountains of Central Europe (the Karkonosze Mountains,Poland)

Soils in mountainous areas are often polygenetic, developed in slope covers that relate to glacial and periglacial activities of the Pleistocene and Holocene and reflect climatic variations. Landscape development during the Holocene may have been influenced by erosion/solifluction that often started after the Holocene climatic optimum. To trace back soil evolution and its timing, we applied a multi‐methodological approach. This approach helped us to outline scenario of soil transformation. According to our results, some aeolian input must have occurred in the late Pleistocene. During that time and the early Holocene, the soils most likely had features of Cryosols or Leptosols. Physico‐chemical and mineralogical analyses have indicated that the material was denudated (between late Boreal to the Atlantic) from the ridge and upper‐slope positions forming a colluvium at mid‐slope positions. Later, during the Sub‐Boreal, mass wasting of the remains of silt material deposited at the end of the Pleistocene age on the ridge top seems to have occurred. In addition, the cool and moist conditions caused the deposition of a colluvium at the lower‐slope positions. The next phase was characterized by the transformation of Leptosols/Cambisols into Podzols at upper‐slope or shoulder positions and to Albic Cambisols at mid‐slope positions. During the Sub‐Boreal period, Stagnosols started to form at the lower part of the slope catena. Overall, the highest erosion rates were calculated at the upper‐slope position and the lowest rates at mid‐slope sites. Berylium‐10 (¹⁰Be) data showed that the Bs, BC/C were covered during the Holocene by a colluvium with a different geological composition which complicated the calculation of erosion or accumulation rates. The interpretation of erosion and accumulation rates in such multi‐layered materials may, therefore, be hampered. However, the multi‐methodological reconstruction we applied shed light on the soil and landscape evolution of the eastern Karkonosze Mountains. Copyright © 2017 John Wiley & Sons, Ltd.     

环形带地震活动能量场分析方法

将地震活动能量作为随机场,采用自然正交函数(或称经验正交函数)展开方法进行分析,计算单元取为环形,选择7级、6级地震作为样本,计算了这些7级、6级地震前环形带地震活动典型场的时间因子曲线。结果表明,选取的7级、6级地震震例震前环形带地震活动典型场的时间因子曲线明显出现了偏离正常变化的异常,异常出现时间大多在震前3年至临震时。环形带地震活动场分析方法还能够分析发生异常的空间分布情况。最后就环形带地震活动场分析方法的应用效果、参数选取以及应用于实际地震预测工作的有关问题进行了讨论。     

大地电场台站日变幅年度变化趋势分析

为了直观展示大地电场日变幅年度变化趋势,获取多年尺度下数据变化形态及特征,选取2012-2015年,4个地电台网8个存在潮汐地电场变化的地电台站观测数据,进行去除台阶、异常数据及滤波处理,计算地电场日变幅。结果显示：①2012-2013年大多数台站存在春冬低、夏秋高的日变幅趋势性特征;②2014-2015年存在几种不同日变幅年度变化趋势,同时同一台站不同测道间日变幅变化趋势存在差异性,该变化趋势和差异性的存在可能与地下介质结构变化和介质的非均匀性有一定关系。     

大尺度雁列断层粘滑运动数值模拟

通过ANSYS软件建立二维雁列断层模型,采用粘弹性力学参数,建立摩擦系数接触单元,模拟10万年时间大尺度雁列走滑断层活动（地震相关活动）,分析挤压条件下的断层活动特征,研究结果表明：①断层时空区域不同,所受应力也不同,接近贯通区域重合地区所受应力较大,粘滑运动剧烈,由贯通区域向断层两侧逐渐延伸,所受应力依次减小;②摩擦系数越小,地震发生频率越高,地震运动周期越短,则位错量相对较小,易发生震级较小地震;摩擦系数越大,地震发生频率越低,地震运动周期越长,则位错量相对较大,易发生震级较大地震;③给定的边界挤压速率越大,地震发生频率越高,地震运动周期越短,则位错量增大,易发生震级较大地震。     

Numerical study on transient harbor oscillations induced by successive solitary waves

Tsunamis are traveling waves which are characterized by long wavelengths and large amplitudes close to the shore. Due to the transformation of tsunamis, undular bores have been frequently observed in the coastal zone and can be viewed as a sequence of solitary waves with different wave heights and different separation distances among them. In this article, transient harbor oscillations induced by incident successive solitary waves are first investigated. The transient oscillations are simulated by a fully nonlinear Boussinesq model, FUNWAVE-TVD. The incident successive solitary waves include double solitary waves and triple solitary waves. This paper mainly focuses on the effects of different waveform parameters of the incident successive solitary waves on the relative wave energy distribution inside the harbor. These wave parameters include the incident wave height, the relative separation distance between adjacent crests, and the number of elementary solitary waves in the incident wave train. The relative separation distance between adjacent crests is defined as the ratio of the distance between adjacent crests in the incident wave train to the effective wavelength of the single solitary wave. Maximum oscillations inside the harbor excited by various incident waves are also discussed. For comparison, the transient oscillation excited by the single solitary wave is also considered. The harbor used in this paper is assumed to be long and narrow and has constant depth; the free surface movement inside the harbor is essentially one-dimensional. This study reveals that, for the given harbor and for the variation ranges of all the waveform parameters of the incident successive solitary waves studied in this paper, the larger incident wave heights and the smaller number of elementary solitary waves in the incident tsunami lead to a more uniform relative wave energy distribution inside the harbor. For the successive solitary waves, the larger relative separation distance between adjacent crests can cause more obvious fluctuations of the relative wave energy distribution over different resonant modes. When the wave height of the elementary solitary wave in the successive solitary waves equals to that of the single solitary wave and the relative separation distance between adjacent crests is equal to or greater than 0.6, the maximum oscillation inside the harbor induced by the successive solitary waves is almost identical to that excited by the single solitary wave.     

Ground roll attenuation based on an empirical curvelet transform

In the field of seismic exploration, ground roll seriously affects the deep effective reflections from subsurface deep structures. Traditional curvelet transform cannot provide an adaptive basis function to achieve a suboptimal denoised result. In this paper, we propose a method based on empirical curvelet transform (ECT) for ground roll attenuation. Unlike the traditional curvelet transform, this method not only decomposes seismic data into multiscale and multi-directional components, but also provides an adaptive filter bank according to frequency content of seismic data itself. So, ground roll can be separated by using this method. However, as the frequency of reflection and ground roll components are close, we apply singular value decomposition (SVD) in the curvelet domain to differentiate the ground roll and reflection better. Examples of synthetic and field seismic data reveal that the proposed method based ECT performs better than the traditional curvelet method in terms of the suppression of ground roll.     

Study and application of PS-wave pre-stack migration in HTI media and an anisotropic correction method

Anisotropy correction is necessary during the processing of converted PSwave seismic data to achieve accurate structural imaging, reservoir prediction, and fracture detection. To effectively eliminate the adverse effects of S-wave splitting and to improve PSwave imaging quality, we tested methods for pre-stack migration imaging and anisotropic correction of PS-wave data. We based this on the propagation rules of seismic waves in a horizontal transverse isotropy medium, which is a fractured medium model that reflects likely subsurface conditions in the field. We used the radial (R) and transverse (T) components of PS-wave data to separate the fast and slow S-wave components, after which their propagation moveout was effectively extracted. Meanwhile, corrections for the energies and propagation moveouts of the R and T components were implemented using mathematical rotation. The PS-wave imaging quality was distinctly improved, and we demonstrated the reliability of our methods through numerical simulations. Applying our methods to three-dimensional and three-component seismic field data from the Xinchang-Hexingchang region of the Western Sichuan Depression in China, we obtained high-quality seismic imaging with continuous reflection wave groups, distinct structural features, and specific stratigraphic contact relationships. This study provides an effective and reliable approach for data processing that will improve the exploration of complex, hidden lithologic gas reservoirs.