Heavy Oils and Oil Sands: Global Distribution and Resource Assessment

Gl obal recoverable resources of heavy oil and oil sands have been assessed by CNPC using a geology-based assessment method combined with the traditional volumetric method, spatial interpolation method, parametric-probability method etc. The most favourable areas for exploration have been selected in accordance with a comprehensive scoring system. The results show: (1) For geological resources, CNPC estimate 991.18 billion tonnes of heavy oil and 501.26 billion tonnes of oil sands globally, of which technically recoverable resources of heavy oil and oil sands comprise 126.74 billion tonnes and 64.13 billion tonnes respectively. More than 80% of the resources occur within Tertiary and Cretaceous reservoirs distributed across 69 heavy-oil basins and 32 oil-sands basins. 99% of recoverable resources of heavy oil and oil sands occur within foreland basins, passive continental-margin basins and cratonic basins. (2) Since residual hydrocarbon resources remain following large-scale hydrocarbon migration and destruction, heavy oil and oil sands are characterized most commonly by late hydrocarbon accumulation, the same basin types and source-reservoir conditions as for conventional hydrocarbon resources, shallow burial depth and stratabound reservoirs. (3) Three accumulation models are recognised, depending on basin type: degradation along slope; destruction by uplift; and migration along faults. (4) In addition to mature exploration regions such as Canada and Venezuela, the Volga-Ural Basin and the Pre-Caspian Basin are less well-explored and have good potential for oil-sand discoveries, and it is predicted that the Middle East will be an important region for heavy-oil development.     

An X-Ray Diffraction Study of an Inclusion in Diamond from the Luobusha Chromite Deposit in Tibet, China

Diamond was found in podiform chromitites of ophiolite and harzburgite from Luobusha, Tibet. There are silicate inclusions in some diamond grains from this area. In the present work, the CCD (charge coupled detector) technology of X-ray powder diffraction was applied to the study of the inclusion in diamond from the ophiolite of Tibet. Diffraction patterns are obtained even though the inclusion is only 20 μm in crystal size. The results show that the inclusion in diamond consists of talc and clinochrysotile. Therefore, it is clear that the diamond from the ophiolite of Luobusha, Tibet, is natural diamond rather than a synthetic one.     

A Comparison Study on the δD Value of Polycyclic Aromatic Hydrocarbons in Hydrous Pyrolysate of Herbaceous Peat with Different Water Medium

To investigate the influence of diagenetic water media on the hydrogen isotopes of individual sedimentary aromatic compounds, a series of hydrous pyrolyses were conducted on herbaceous peat. Polycyclic aromatic hydrocarbons (PAHs) in hydrous pyrolysed samples and their hydrogen isotopic composition characteristics were studied. The aqueous medium demonstrated a significant influence on the hydrogen isotopic composition of the individual PAHs generated during pyrolysis. The results showed that the PAHs formed after pyrolysis in the presence of a saltwater medium with high δD value from a salt lake had a heavy hydrogen isotopic composition. The PAHs formed after pyrolysis in the presence of a fresh water medium with low δD value from a swamp had a light hydrogen isotopic composition. The difference in the average PAH δD value between the two hydrous experiments varied from –174‰ to –109‰, suggesting that the hydrogen isotopic composition of individual sedimentary PAHs can reflect the source of the diagenetic water medium. In addition, a comparative study found that the hydrogen isotopes of PAHs were superior to those of n-alkanes in the same sample for diagenetic water indications. The results indicated that the exchange of water-derived inorganic hydrogen and organic hydrogen was more intensive in freshwater experiments than in saltwater experiments. With an increase in the simulation temperature, the average δD value of PAHs generated in the hydrous simulation experiments showed an increasing trend, reflecting that the δD value of sedimentary PAHs formed with the participation of diagenetic water media was still closely related to the thermal maturity of organic matter. Comparative studies showed that the δD values of different types of organic compounds produced by hydrous pyrolysis of peat were in the order, PAHs > n-alkanes > methane.     

Typical Geochemical Elements in Loess Deposit in the Northeastern Tibetan Plateau and Its Paleoclimatic Implication

Widespread and thick loess deposit in the northeastern Tibetan Plateau records paleoclimatic changes over the Quaternary period. In this study, we investigate a loess section located in a high terrace of the Huangshui River in the Xining Basin, and collect samples at 20-cm intervals by digging a well of 16-m depth （including paleosol S1 and SO and several loess interlayers over the last glacial-interglacial cycle and the Holocene）. Concentration of some active elements （Sr and Ca） and inert elements （Rb, Zr, Ti） in these loess samples are measured. The results show that ratios of those elements （oxide）, such as Rb/Sr, Ti/Sr, and Zr/CaO ratios, would indicate sensitively paleoclimatic changes, especially the history of precipitation over the last glacial-interglacial and the Holocene. Moreover, the curves of Rb/Sr, Ti/Sr, and Zr/CaO ratios had almost the same variable trends from the bottom to the top and also closely correlated with values of magnetic susceptibility and the global marine δ^18O record. But compared with the curves of magnetic susceptibility, the changes of ratios of these elements （oxide） are clearer and easy to understand. Therefore, the ratios of these typical chemical elements in the loess deposit may be used as an excellent index to investigate the history of paleoclimate, particularly precipitation changes in the northeastern Tibetan Plateau.     

Environmental Investigation and Evaluation of Land Subsidence in the Datong Coalfield Based on InSAR Technology

Heavy mining of Jurassic and Carboniferous horizontal coal seams in the Datong coalfield has seriously affected the local geological environment, which is mainly manifested by such geohazards as soil avalanches, landslides, mudflows, surface subsidence, surface cracks, surface solid waste accumulation and surface deformation. More seriously, coal mining causes groundwater to leak. Overpumping of groundwater has resulted in substantial land subsidence of the urban area in Datong City. Based on the previous geo-environmental investigation in the work area, the authors used radar remote sensing techniques such as InSAR （synthetic aperture radar interferometry） and D-InSAR （differential synthetic aperture radar interferometry）, supplemented by the optical remote sensing method, for geo-environmental investigation to ascertain the geo-environmental background of the Datong Jurassic and Carboniferous-Permian coalfield and evaluate the effects of the geohazards, thus providing a basis for the geo-environmental protection, geohazard control and prevention, land improvement and optimization of the human environment. In this study 8 cog-nominal ERS-1/2 SAR data frames during 1992 to 2003 were used, but the following processing was made： （1） the multitemporal SAR magnitude images were used to interpret the geological structure, vegetation, microgeomorphology and drainage system; （2） the multi-temporal InSAR coherent images were used to make a classification of surface features and evaluate the coherence change due to coal mining; and （3） the multi-temporal cog-nominal SAR images were used to complete D-InSAR processing to remove the information of differential deformation areas （sites）. In the end, a ten-year time series of differential interferograms were obtained using the multi-temporal cog-nominal SAR images. In the tests, 84 deformed areas （sites） were obtained, belonging to those in 1993-1996, 1996-1997, 1997-1998, 1998-2001, 1998-2002 and 2001-2003 respectively. Of the 84 areas, 44 are m     

Titanium Isotope Analysis of Igneous Reference Materials using a Double-spike MC-ICP-MS Method

Ti separation was achieved by ion-exchange chromatography using Bio-Rad AG 1-X8 anion-exchange and DGA resins. For high-Fe/Ti and high-Mg/Ti igneous samples, a three-column procedure was required, whereas a two-column procedure was used for low-Fe/Ti and low-Mg/Ti igneous samples. The Ti isotopes were analysed by MC-ICP-MS, and instrumental mass bias was corrected using a 47Ti-49Ti double-spike technique. The 47Ti-49Ti double-spike and SRM 3162a were calibrated using SRM 979-Cr, certificated value 53Cr/52Crtrue = 0.11339. Isobaric interference was evaluated by analysing Alfa-Ti doped with Na, Mg, Ca, and Mo, and results indicate that high concentrations of Na and Mg have no significant effect on Ti isotope analyses; however, Ca and Mo interferences lead to erroneous δ49/47Ti values when Ca/Ti and Mo/Ti ratios exceed 0.01 and 0.1, respectively. Titanium isotopic compositions were determined for 12 igneous reference materials, BCR-2, BHVO-2, GBW07105, AGV-1, AGV-2, W-2, GBW07123, GBW07126, GBW07127, GBW07101, JP-1, and DTS-2b. Samples yield δ49/47Ti (‰) of ?0.035 ± 0.022, ?0.038 ± 0.031, 0.031 ± 0.022, 0.059 ± 0.038, 0.044 ± 0.037, 0.000 ± 0.015, 0.154 ± 0.044, ?0.044 ± 0.018, 0.010 ± 0.022, 0.064 ± 0.043, 0.169 ± 0.034, and ?0.047 ± 0.025 (relative to OL-Ti, ±2SD), respectively; of which isotopic compositions of DTS-2b, JP-1, GBW07101, GBW07105, GBW07123, GBW07126, and GBW07127 are reported for the first time. Standard Alfa-Ti was analysed repeatedly over a ten-month period, indicating a reproducibility of ±0.047 (2SD) for δ49/47Ti, similar to the precisions obtained for geochemical reference materials.     

Sedimentary Environments of Cambrian–Ordovician Source Rocks and Ultra-deep Petroleum Accumulation in the Tarim Basin

The Tarim Basin is the only petroliferous basin enriched with marine oil and gas in China. It is presently also the deepest basin for petroleum exploration and development in the world. There are two main sets of marine Source Rocks (SRs) in the Tarim Basin, namely the high over-mature Cambrian–Lower Ordovician (∈–O1) and the moderately mature Middle–Upper Ordovician (O2–3). The characteristic biomarkers of SRs and oils indicate that the main origin of the marine petroleum is a mixed source of ∈–O1 and O2–3 SRs. With increasing burial, the hydrocarbon contribution of the ∈–O1 SRs gradually increases. Accompanied by the superposition of multi-stage hydrocarbon-generation of the SRs and various secondary alteration processes, the emergence and abnormal enrichment of terpenoids, thiophene and trimethylaryl isoprenoid in deep reservoirs indicate a complex genesis of various deep oils and gases. Through the analysis of the biofacies and sedimentary environments of the ∈–O1 and O2–3 SRs, it is shown that the lower Paleozoic high-quality SRs in the Tarim Basin were mainly deposited in a passive continental margin and the gentle slope of the platform, deep-water shelf and slope facies, which has exhibited a good response to the local tectonic-sedimentary environment. The slope of the paleo-uplift is the mutual area for the development of carbonate reservoirs and the deposition of marine SRs, which would be favorable for the accumulation of petroleum. Due to the characteristics of low ground temperature, the latest rapid and deep burial does not cause massive oil-cracking in the paleo-uplift and slope area. Therefore, it is speculated that the marine reservoirs in the slope of the Tabei Uplift are likely to be a favorable area for deep petroleum exploration, while the oil-cracking gas would be a potential reserve around the west margin of the Manjiaer Depression. Hydrocarbons were generated from various unit SRs, mainly migrating along the lateral unconformities or reservoirs and the vertical faults. They eventually brought up three major types of exploration fields: middle and lower Cambrian salt-related assemblages, dolomite inner reservoirs and Middle and Lower Ordovician oil-bearing karst, which would become the most favorable target of marine ultra-deep exploration in the Tarim Basin.     

Effect of Shale Reservoir Characteristics on Shale Oil Movability in the Lower Third Member of the Shahejie Formation,Zhanhua Sag

To reveal the effect of shale reservoir characteristics on the movability of shale oil and its action mechanism in the lower third member of the Shahejie Formation(Es3l), samples with different features were selected and analyzed using N2 adsorption, high-pressure mercury injection capillary pressure(MICP), nuclear magnetic resonance(NMR), high-speed centrifugation, and displacement image techniques. The results show that shale pore structure characteristics control shale oil movability directly. Movable oil saturation has a positive relationship with pore volume for radius > 2 μm, as larger pores often have higher movable oil saturation, indicating that movable oil is present in relatively larger pores. The main reasons for this are as follows. The relatively smaller pores often have oil-wetting properties because of organic matter, which has an unfavorable effect on the flow of oil, while the relatively larger pores are often wetted by water, which is helpful to shale oil movability. The rich surface provided by the relatively smaller pores is beneficial to the adsorption of immovable oil. Meanwhile, the relatively larger pores create significant pore volume for movable oil. Moreover, the larger pores often have good pore connectivity. Pores and fractures are interconnected to form a complex fracture network, which provides a good permeability channel for shale oil flow. The smaller pores are mostly distributed separately;thus, they are not conducive to the flow of shale oil. The mineral composition and fabric macroscopically affect the movability of shale oil. Calcite plays an active role in shale oil movability by increasing the brittleness of shale and is more likely to form micro-cracks under the same stress background. Clay does not utilize shale oil flow because of its large specific surface area and its block effect. The bedding structure increases the large-scale storage space and improves the connectivity of pores at different scales, which is conducive to the movability of shale oil.     

Tonian Tectonic‐Strata Regions and their Geological Significance in China

The continent of China developed through the coalescence of three major cratons(North China, Tarim and Yangtze) and continental micro-blocks through the processes of oceanic crust disappearance and acceretionary-collision of continental crusts. The strata of the Chinese continental landmass are subdivided into 12 tectonic-strata regions. Based on the composition of geological features among the three main cratons, continental micro-blocks and other major global cratons, their affinities can be p...     

赣南天门山-红桃岭钨锡矿田成岩成矿时代精细测定及其地质意义

素有“世界钨都”美誉的赣南产有密集的与花岗岩类侵入体密切相关的钨锡多金属矿床,然而,目前对钨锡成矿和花岗岩成岩年龄还缺乏很好的约束。本文以天门山-红桃岭钨锡矿田为对象,在详细的矿田地质调查和典型矿床解剖基础之上,采用高精度测年技术开展了成岩成矿年代学研究。利用锆石SHRIMPU-Pb法,分别获得天门山似斑状黑云母二长花岗岩体和红桃岭黑云母花岗岩体成岩年龄分别为151.8±2.9Ma(n=14,MSWD=1.3)和151.4±3.1Ma(n=11,MSWD=0.34);利用辉钼矿Re-Os等时线法,分别获得牛岭内带石英脉型和樟斗外带石英脉型钨矿成矿年龄分别为154.9±4.1~154.6±9.7Ma和149.1±7.1Ma(n=6,MSWD=1.3)。可见,本区钨矿床成矿和与之有密切成因关系的花岗岩成岩年龄限定在晚侏罗世,对应于区域华南中生代第二次大规模成矿作用,钨成矿与花岗岩成岩基本不存在时差。