Coral communities and reefs from Guerrero,Southern Mexican Pacific

Corals in the Eastern Pacific extend south from the Gulf of California to Ecuador and oceanic Chile, and west from Colombia to Clipperton Atoll. Nevertheless, large stretches of the Mexican Pacific remain fundamentally unstudied. Therefore, to assess the current conditions of coral communities, a coastal fringe ～300 km long (17°40′ N, 101°39′ W to 16°46′ N, 99°49′ W) was surveyed within the Southern Mexican Pacific, between 2005 and 2009. Fifteen stony coral species were identified at 13 coral communities and six Pocillopora‐dominated fringing reefs, with Pocillopora verrucosa and Pocillopora damicornis the primary contributing taxa. Reef development was identified in embayments or behind rocks or islands that offered shelter from northern and northwestern winds. Observations of Pocillopora effusus, Pocillopora inflata, Porites lobata, Pavona clavus, and Pavona varians expanded the species known geographic ranges by several degrees of latitude, suggesting reef building fauna comprised a mixture of widespread and relatively rare Eastern Pacific corals. Results indicated greater live coral cover in the Ixtapa‐Zihuatanejo area (15–73%) than in the Acapulco localities, which had high algal dominance; the reefs in the latter region exhibited high erosion. Regional differences are likely the result of long‐standing anthropogenic pressures around Acapulco since 1950, when it became an important tourist destination. This paper is the first detailed report of ecologically stressed corals and coral reefs from the state of Guerrero on the Mexican Southern Pacific coast.     

Tectonic setting of the Azores Plateau deduced from a OBS survey

The studies of Azores seismicity generally show shocks with either normal faulting or right-lateral strike-slip along the ESE direction, compatible with a eastward relative motion of the Eurasian (EU) relative to the African (AF) plate. However, the 1 January 1980 earthquake was interpreted as a clear left-lateral strike-slip shock along the N150E direction. This pattern is difficult to explain in terms of the relative motion between the EU, AF and North American (NA) plates: all available models for the present day movement of this triple junction fail to explain the regional variability in the stress conditions of the area. Here we present data from a 34-day long Ocean Bottom Seismograph array deployment. We show that the seismicity is distributed along a band aligned with the island chain itself, and is concentrated along several faults with an approximate N150E strike, cutting the Azores plateau in all the area covered by the OBS network. The combination of these new results with other geophysical data permits us to conclude that the tectonic setting of the Azores plateau is characterised by the existence of two sets of faults, in the N120E and N150E directions, defining several crustal blocks, whose relative motion accommodates the interaction of the three megaplates. The deformation of these tectonic blocks is probably driven by the shear between the EU and AF plates. This model explains well the spatial variability of the stress conditions in the Azores domain, the combination of dextral and sinistral strike slip mechanisms and the observed seismotectonics of the Azores islands.     

The European vision for oceans and seas—Social and political dimensions of the Green Paper on Maritime Policy for the EU

The EU Green Paper on Maritime Policy is the European response to the new generation of ocean strategies based on science, technology and innovation aimed at new objectives, such as the strengthening of security and access to new resources. The European character of the proposal is found in the presence of social, cultural and historical elements, what is called the “European vision”. The viability of a European vision of the oceans and the idea of maritime empire as an extension of the current concept of empire within the general context of emerging ocean strategies are the elements offered up for debate on this European Union initiative.     

Sedimentary petrology and geochemistry of siliciclastic rocks from the upper Jurassic Tordillo Formation (Neuquén Basin, western Argentina): Implications for provenance and tectonic setting

The Upper Jurassic Tordillo Formation is exposed along the western edge of the Neuquén Basin (west central Argentina) and consists of fluvial strata deposited under arid/semiarid conditions. The pebble composition of conglomerates, mineralogical composition of sandstones and pelitic rocks, and major- and trace-element geochemistry of sandstones, mudstones, and primary pyroclastic deposits are evaluated to determine the provenance and tectonic setting of the sedimentary basin. Conglomerates and sandstones derived almost exclusively from volcanic sources. The stratigraphic sections to the south show a clast population of conglomerates dominated by silicic volcanic fragments and a predominance of feldspathic litharenites. This framework composition records erosion of Triassic–Jurassic synrift volcaniclastic rocks and basement rocks from the Huincul arch, which was exhumed as a result of Late Jurassic inversion. In the northwestern part of the study area, conglomerates show a large proportion of mafic and acidic volcanic rock fragments, and sandstones are characterised by a high content of mafic volcanic rock fragments and plagioclase. These data suggest that the source of the sandstones and conglomerates was primarily the Andean magmatic arc, located west of the Neuquén Basin. The clay mineral assemblage is interpreted as the result of a complex set of factors, including source rock, climate, transport, and diagenesis. Postdepositional processes produced significant variations in the original compositions, especially the fine-grained deposits. The Tordillo sediments are characterised by moderate SiO₂ contents, variable abundances of K₂O and Na₂O, and a relatively high proportion of ferromagnesian elements. The degree of chemical weathering in the source area, expressed as the chemical index of alteration, is low to moderate. The major element geochemistry and Th/Sc, K/Rb, Co/Th, La/Sc, and Cr/Th values point to a significant input of detrital volcanic material of calcalkaline felsic and intermediate composition. However, major element geochemistry is not useful for interpreting the tectonic setting. Discrimination plots based on immobile trace elements, such as Ti, Zr, La, Sc, and Th, show that most data lie in the active continental margin field. Geochemical information is not sufficiently sensitive to differentiate the two different source areas recognized by petrographic and modal analyses of conglomerates and sandstones.     

The Würm in NW Iberia, a pollen record from Area Longa (Galicia)

The pollen record at Area Longa is the westernmost sequence available for investigation of the last glaciation in continental Europe. It is located in a region, NW Iberia, for which data from times earlier than the late glacial period are scarce. It comprises a series of exposed limnetic levels that lie above an Eemian (Oxygen Isotope Stage [OIS] 5e) beach and are separated by inorganic layers. The oldest limnetic level (Level I), attributed to the early glacial period (OIS 5a to OIS 5d), shows a dominance of woodland with high proportions of Fagus pollen and is tentatively identified with St. Germain I. The lower pleniglacial (OIS 4) Level II records a stadial landscape of grassland and shrub. Level III, from the pleniglacial interstade (OIS 3), reflects a complex period in which three warmer woodland phases alternated with periods of more open vegetation. This cyclical behavior correlates with the ice core isotope record and with the general tendencies observed in other Würmian pollen records, but the composition of our pollen profiles differs from those observed in these other records. In NW Iberia, the dominant trees were deciduous taxa, not conifers. Of particular note is the presence of lowland Fagus woodlands during the pre-Würm, and the occurrence of Carpinus considerably farther west than the boundary of its current distribution in the Iberian Peninsula.     

Indications of an extreme event deposits along the west coast of India: evidences from GPR investigations

The ground-penetrating radar (GPR) was used to trace the subsurface details in the Palshet coastal zone (Maharashtra) as it exhibits an interesting array of geomorphological features. Furthermore, our main goal was to identify and locate features that might have formed during a reported extreme event and its effects on the flow of the nearby Sundri River. Two profiles (8 and 4 m depth) were collected across the beach and along the backshore, respectively. While the 8-m depth profile (west to east; across the beach) indicates a series of coastline regression in this area, the 4-m depth profile along the coastline (north to south) in the backshore zone reveals two significant incidents viz., (1) stages of development of the paleo-channels that indicate the migration of the Sundri River towards south and (2) huge sediment deposits up to 2.5-m thick in the backshore area. The erosional relict surface (~2.5 m depth) was traced along with various spells of sediments that perhaps occurred due to an extreme event. Sand samples were collected from two trial pits along the GPR profiles to understand the sedimentology and mineralogy in the backshore area. These data together with beach profiles and geomorphological maps suggest that the sands were deposited by an extreme event perhaps during the 1854 cyclonic storm. The sands were trapped in suitable geomorphological sites along the Palshet coast and these sand deposits of about 2.5 m thickness forced the River Sundri to shift its course towards the south. This new revelation facilitates a further study that could focus on the nearby coastal areas to document such extreme event deposits and their influence on the geomorphic set-up.     

Aeolian dune migration along the Ceará coast, north-eastern Brazil

Aeolian dune dimensions and migration rates are analysed along the Ceará coast, north-east Brazil. Dunes that are currently mobile along the Ceará coast are composed of barchans and sand sheets. The results show that barchans maintain an equilibrium form, which can be characterized by values of dimensionless shape parameters H/W and W/L , where H is the dune height, W is the wing-to-wing width and L is the dune length. Dunes are highly mobile, with average migration rates of 17·5 m year⁻¹ for barchans and 10 m year⁻¹ for sand sheets. The calculated migration rates were found to depend strongly on dune dimensions for both barchans and sand sheets, i.e. the larger the dune is, the lower the migration rate will be. This size dependence was associated with the existence of a representative common transport rate along the dune fields, which induces a different dune migration rate dependent on dune size. Finally, from the observed dune evolution, an aggregated scale aeolian sediment transport was inferred. This bulk transport rate, of the order of 90–100 m³ m⁻¹ year⁻¹, is only valid for a timescale of years to decades, which is the timescale used in dune evolution analysis.     

Kinematic interaction factors of deep foundations with inclined piles

The beneficial or detrimental role of battered piles on the dynamic response of piled foundations has not been yet fully elucidated. In order to shed more light on this aspect, kinematic interaction factors of deep foundations with inclined piles, are provided for single‐battered piles, as well as for 2 × 2 and 3 × 3 groups of piles subjected to vertically incident plane shear S waves. Piles are modelled as linear‐elastic Bernoulli beams, whereas soil is assumed to be a linear, isotropic, homogeneous viscoelastic half‐space. Different pile group configurations, pile‐soil stiffness ratios, and rake angles are considered. The relevance and main trends observed in the influence of the rake angle on the kinematic interaction factors of the analysed foundations are inferred from the presented results. An important dependence of the kinematic interaction factors on the rake angle is observed together with the existence of an inclination angle at which cap rotation and excitation become out of phase in the low‐to‐mid frequency range. The existence of a small batter angle that provides minimum cap rotation is also shown. Copyright © 2014 John Wiley & Sons, Ltd.     

Mode Identification from Line Profiles using the Direct Fitting Technique

The method of moments and the direct fitting method are the onlyspectroscopic methods of mode identification which allow a determination ofall pulsational parameters. The pulsation parameters are required to predictthe light amplitude and phase which can be important discriminants in modeidentification. The direct fitting method has several advantages over themethod of moments. It is not restricted to low spherical harmonic degree or form of the eigenfunction and is not sensitive to the placement of the continuum. In the last few years the method has been applied to several different types of stars. We briefly describe the method and give someexamples of its application.