Soft proton flux on <Emphasis Type="Italic">ATHENA</Emphasis> focal plane and its impact on the magnetic diverter design

The experience gained with the current generation of X-ray telescopes like Chandra and XMM-Newton has shown that low energy “soft” protons can pose a severe threat to the possibility to exploit scientific data, reducing the available exposure times by up to 50% and introducing a poorly reproducible background component. These soft protons are present in orbits outside the radiation belts and enter the mirrors, being concentrated towards the focal plane instruments, losing energy along their path and finally depositing their remaining energy in the detectors. Their contribution to the residual background will be even higher for ATHENA with respect to previous missions, given the much higher collecting area of the mirrors, even if the instruments will likely suffer no significant radiation damage from this particles flux. As a consequence this soft proton flux shall be damped with the use of a magnetic diverter to avoid excess background loading on the WFI or X-IFU instruments. We present here a first complete evaluation of this background component for the two focal plane instruments of the ATHENA mission in absence of a magnetic diverter, and derive the requirements for such device to reduce the soft protons induced background below the level required to enable the mission science. We estimate the soft proton flux expected in L2 for the interplanetary component and for the component generated locally by acceleration processes in the magnetotail. We produce a proton response matrix for each of the two instruments of ATHENA focal plane, exploiting two independent Monte Carlo simulations to estimate the optics concentration efficiency, and Geant4 simulations to evaluate the energy loss inside the radiation filters and deposited in the detector. With this modular approach we derive the expected fluxes and spectra for the soft protons component of the background. Finally, we calculate the specifics of a magnetic diverter able to reduce such flux below the required level for both X-IFU and WFI.     

Temporal correlation of population composition and environmental variables in the marine invader Ciona robusta

The capacity for ascidians to inhabit coastal sea floor worldwide relies on their peculiar tolerance to environmental variables and pollution, which is considered, together with high levels of genetic diversity, among the main drivers of their invasive potential. In spite of the continued interest in the genetics of invasive species, little attention has been paid toward the microevolutionary processes that drive structure and fate of ascidian populations over time under chemically polluted conditions. Understanding the interplay between environmental and population dynamics is critical to predict the biodiversity of marine coastal ecosystems. In the present study, a local population of the ascidian Ciona robusta living in the Fusaro Lagoon has been monitored over a 13‐month period of sampling. Physico‐chemical parameters (temperature, salinity, turbidity, dissolved oxygen, heavy metals), genetic composition (microsatellites, ITS‐2), abundance and biomass (wet and dry weight) were assessed with the aim to infer fine‐scale temporal variation of population structure with respect to rapid environmental change. Analysis of biomass showed that C. robusta is highly sensitive to salinity and oxygen concentrations. Further, genetic analysis suggested a highly dynamic population structure, likely due to the strong clustering of temporal samples and distinct responses to environmental conditions, including bioaccumulation of heavy metals. Here, we hypothesize that rapid variation in allele frequencies of neutral markers in C. robusta populations may increase the ability of the species to colonize habitats that are subject to strong variation and are under heavy human pressure.     

Characteristics of the Sahara as a meteorite recovery surface

We describe the geological, geomorphological, and paleoclimatic setting of the Sahara of North Africa in particular, focused on the main meteorite dense collection areas (DCA; Morocco, Algeria, Tunisia, and Libya). We report on the outcome of several meteorite recovery field expeditions in Morocco and Tunisia since 2008, by car and by foot, that applied systematic search methods. The number of meteorites collected is 41 ordinary chondrites and one brachinite. The statistics of unpaired ordinary chondrites indicates that H chondrites are more abundant (21) than L chondrites (12), while LL chondrites are rare (2). Our meteorite density estimates for Tunisia and Morocco are in the order of magnitude of 1 met km^?2. An estimate of the total maximum number of meteorites that could be recovered from the Sahara is 780,000 meteorites. We selected 23 meteorites from Aridal, Bou Kra, Bir Zar, and Tieret DCAs for ¹⁴C dating. The results show a wide range of terrestrial ages from 0.4 to more than 40 kyr with a majority of meteorites showing ages between 0.4 and 20 kyr. The weathering degree of these meteorites is ranges from minor (W1) to strong (W4). The highest weathering grades result from repeated oscillations between high and low humidity in the Sahara. However, there appears to be no correlation between weathering grade and terrestrial age of meteorites.     

Joint cosmological formation of QSOs and bulge-dominated galaxies

Older and more recent pieces of observational evidence suggest a strong connection between QSOs and galaxies; in particular, the recently discovered correlation between black hole and galactic bulge masses suggests that QSO activity is directly connected to the formation of galactic bulges. The cosmological problem of QSO formation is analysed in the framework of an analytical model for galaxy formation; for the first time a joint comparison with galaxy and QSO observables is performed. In this model it is assumed that the same physical variable that determines galaxy morphology is able to modulate the mass of the black hole responsible for QSO activity. Both halo spin and the occurrence of a major merger are considered as candidates for this role. The predictions of the model are compared with available data for the type-dependent galaxy mass functions, the star formation history of elliptical galaxies, the QSO luminosity function and its evolution (including the obscured objects contributing to the hard-X-ray background), the mass function of dormant black holes and the distribution of black hole-to-bulge mass ratios. A good agreement with observations is obtained if the halo spin modulates the efficiency of black hole formation, and if the galactic haloes at z =0 have shone in an inverted order with respect to the hierarchical one (i.e., stars and black holes in bigger galactic haloes have formed before those in smaller ones). This inversion of hierarchical order for galaxy formation, which reconciles galaxy formation with QSO evolution, is consistent with many pieces of observational evidence.     

Chemical Analysis of Iron Meteorites by Inductively Coupled Plasma-Mass Spectrometry

Iron meteorites were analysed for nineteen siderophile and chalcophile elements by conventional inductively coupled plasma-mass spectrometry with the specific aim of demonstrating that this technique is an effective alternative to the more routine, yet complex, methodologies adopted in this field such as instrumental or radiochemical neutron activation analysis. Two aliquots of each meteorite sample, in the form of small shavings, were dissolved, one in 6 mol l^-1 HNO₃ and the other in aqua regia , and diluted to a final concentration of 1 mg sample per 1 ml of solution, without pre-concentrating the analytes. Nitric acid solutions were used for the determination of the elements Cr, Co, Ni, Cu, Ga, Ge and As; aqua regia solutions were analysed for the elements Mo, Ru, Rh, Pd, In, Sn, Sb, W, Re, Ir, Pt and Au. Samples were analysed by external calibration, carried out using synthetic multi-elemental solutions, and internal standardisation (with Be, Rb and Bi selected as internal standards). The results obtained from the analyses of nine geochemically well-characterized iron meteorites (Canyon Diablo, Odessa, Toluca, Coahuila, Sikhote-Alin, Buenaventura, Tambo Quemado, Gibeon, NWA 859) with widely variable chemical compositions are in good agreement with literature values for most elements. Detection limits were generally below the lowest concentration observed in iron meteorites. The most notable exception is for Ge, which cannot be successfully determined in the low-Ge meteorites of groups IVA, IVB and IIIF and a number of ungrouped irons. A test of the overall reproducibility of the adopted method, undertaken by repeatedly analysing the same Odessa IAB meteorite specimen, yielded relative standard deviations (1 s ) of between 1 and 6% for all elements except Cr (40%).     

Organic pollutants (PAHs, PCBs) in sediments from the Mar Piccolo in Taranto (Ionian Sea, Southern Italy)

Polychlorinated biphenyls (PCBs) and 17 parent polycyclic aromatic hydrocarbons (PAHs) were determined in surface sediments from nine stations in the Mar Piccolo of Taranto (Ionian Sea, Southern Italy). Total PAH concentrations ranged from 380 to 12,750 microg/kg d.w., while total PCB levels ranged from 2 to 1684 microg/kg d.w.; this values were higher than those found in others marine coastal areas of the Mediterranean Sea. For PAHs, low molecular weight/high molecular weight, phenanthrene/anthracene and fluoranthene/pyrene ratio were used for discriminating between pyrolitic and petroleum origin. Results showed that PAHs were mainly of pyrolitic origin. PCB and PAH levels in sediments were compared with Sediments Quality Guidelines (ERM-ERL, TEL-PEL indexes) for evaluation probable toxic effects on marine organism. Finally, ERM and PEL quotients were used to evaluate the degree to which chemicals exceed guidelines. Results suggest an ecotoxicological risk for benthic organisms mainly in the first inlet, where high concentrations of PCBs were found in sediments influenced by harbour activities.     

Effects of climate warming on Olive and olive fly (Bactrocera oleae (Gmelin)) in California and Italy

Climate change is expected to alter the geographic distribution and abundance of many species. Here we examine the potential effects of climate warming on olive (Olea europaea) and olive fly (Bactrocera oleae) across the ecological zones of Arizona–California (AZ–CA) and Italy. A weather-driven physiologically-based demographic model was developed from the extensive literature and used to simulate the phenology, growth and population dynamics of both species. Observed weather for several years from 151 sites in AZ–CA and 84 sites in Italy were used in the study. Three climate-warming scenarios were developed by increasing observed average daily temperature 1°, 2° and 3°C. Predictions of bloom dates, yield, total fly pupae and percent infestation were mapped using GRASS GIS. Linear multiple-regression was used to estimate the effects of weather on yield and fly abundance. Olive has a much wider temperature range of favorability than olive fly. The model predicted the present distributions of both species and gave important insights on the potential effects of climate warming on them. In AZ–CA, climate warming is expected to contract the range of olive in southern desert areas, and expand it northward and along coastal areas. Olive fly is currently limited by high temperature in the southern part of its range and by cold weather in northern areas. Climate warming is expected to increase the range of olive fly northward and in coastal areas, but decrease it in southern areas. In Italy, the range of olive is expected to increase into currently unfavorable cold areas in higher elevations in the Apennine Mountains in central Italy, and in the Po Valley in the north. Climate warming is expected to increase the range of olive fly northward throughout most of Italy.     

Sample return of interstellar matter (SARIM)

The scientific community has expressed strong interest to re-fly Stardust-like missions with improved instrumentation. We propose a new mission concept, SARIM, that collects interstellar and interplanetary dust particles and returns them to Earth. SARIM is optimised for the collection and discrimination of interstellar dust grains. Improved active dust collectors on-board allow us to perform in-situ determination of individual dust impacts and their impact location. This will provide important constraints for subsequent laboratory analysis. The SARIM spacecraft will be placed at the L2 libration point of the Sun–Earth system, outside the Earth’s debris belts and inside the solar-wind charging environment. SARIM is three-axes stabilised and collects interstellar grains between July and October when the relative encounter speeds with interstellar dust grains are lowest (4 to 20 km/s). During a 3-year dust collection period several hundred interstellar and several thousand interplanetary grains will be collected by a total sensitive area of 1 m². At the end of the collection phase seven collector modules are stored and sealed in a MIRKA-type sample return capsule. SARIM will return the capsule containing the stardust to Earth to allow for an extraction and investigation of interstellar samples by latest laboratory technologies.