Amplifying (or Reversing) the Territorial Disparities in Land Vulnerability to Soil Degradation: The Case of Italy

This article analyzes the territorial disparities in the level of land vulnerability (TDLV) to soil degradation caused by five processes (soil erosion, salinization, sealing, contamination, and compaction) as well as by climate variations in Italy in 1990 and 2000. The analysis reveals, for each soil degradation process, a typical spatial distribution across Italy. Three processes (soil salinization, compaction, and sealing) contribute significantly to the increase in land vulnerability, which is mainly concentrated in risky areas. The observed disparities highlight a growing environmental divide between northern Italy (an economically developed region, not at risk of desertification) and southern Italy and the two main islands (dry, disadvantaged regions at risk of desertification). The knowledge of such a territorial divide and of the underlying soil degradation processes is regarded as important for environmental policies at the country and regional scales aimed at sustaining the economic and socioenvironmental cohesion between areas that are either vulnerable or nonvulnerable to soil degradation. The proposed approach should be seen as part of a decision-making tool informing policies and supporting the design of management solutions, hopefully reversing disparities in land vulnerability to soil degradation.     

Scaling Transition in Earthquake Sources: A Possible Link Between Seismic and Laboratory Measurements

We estimate the corner frequencies of 20 crustal seismic events from mainshock–aftershock sequences in different tectonic environments (mainshocks 5.7 < M _W < 7.6) using the well-established seismic coda ratio technique (Mayeda et al. in Geophys Res Lett 34:L11303, 2007; Mayeda and Malagnini in Geophys Res Lett, 2010), which provides optimal stability and does not require path or site corrections. For each sequence, we assumed the Brune source model and estimated all the events’ corner frequencies and associated apparent stresses following the MDAC spectral formulation of Walter and Taylor (A revised magnitude and distance amplitude correction (MDAC2) procedure for regional seismic discriminants, 2001), which allows for the possibility of non-self-similar source scaling. Within each sequence, we observe a systematic deviation from the self-similar \( M_{0} \propto \mathop f\nolimits_{\text{c}}^{ - 3} \) line, all data being rather compatible with \( M_{0} \propto \mathop f\nolimits_{\text{c}}^{ - (3 + \varepsilon )} \) , where ε > 0 (Kanamori and Rivera in Bull Seismol Soc Am 94:314–319, 2004). The deviation from a strict self-similar behavior within each earthquake sequence of our collection is indicated by a systematic increase in the estimated average static stress drop and apparent stress with increasing seismic moment (moment magnitude). Our favored physical interpretation for the increased apparent stress with earthquake size is a progressive frictional weakening for increasing seismic slip, in agreement with recent results obtained in laboratory experiments performed on state-of-the-art apparatuses at slip rates of the order of 1 m/s or larger. At smaller magnitudes (M _W < 5.5), the overall data set is characterized by a variability in apparent stress of almost three orders of magnitude, mostly from the scatter observed in strike-slip sequences. Larger events (M _W > 5.5) show much less variability: about one order of magnitude. It appears that the apparent stress (and static stress drop) does not grow indefinitely at larger magnitudes: for example, in the case of the Chi–Chi sequence (the best sampled sequence between M _W 5 and 6.5), some roughly constant stress parameters characterize earthquakes larger than M _W ~ 5.5. A representative fault slip for M _W 5.5 is a few tens of centimeters (e.g., Ide and Takeo in J Geophys Res 102:27379–27391, 1997), which corresponds to the slip amount at which effective lubrication is observed, according to recent laboratory friction experiments performed at seismic slip velocities (V ~ 1 m/s) and normal stresses representative of crustal depths (Di Toro et al. in Nature in press, 2011, and references therein). If the observed deviation from self-similar scaling is explained in terms of an asymptotic increase in apparent stress (Malagnini et al. in Pure Appl Geophys, 2014, this volume), which is directly related to dynamic stress drop on the fault, one interpretation is that for a seismic slip of a few tens of centimeters (M _W ~ 5.5) or larger, a fully lubricated frictional state may be asymptotically approached.     

Hydrogeochemical investigations and groundwater provinces of the Friuli Venezia Giulia Plain aquifers,northeastern Italy

Water resources are a key factor, particularly for the planning of the sustainable regional development of agriculture, as well as for socio-economic development in general. A hydrochemical investigation was conducted in the Friuli Venezia Giulia aquifer systems to identify groundwater evolution, recharge and extent of pollution. Temperature, pH, electric conductivity, total dissolved solids, alkalinity, total hardness, SAR, Ca²⁺, Na⁺, K⁺, Mg²⁺, Cl⁻, SO₄ ²⁻, NO₃ ⁻, HCO₃ ⁻ _, water quality and type, saturation indexes and the environmental stable isotope δ¹⁸O were determined in 149 sampling stations. The pattern of geochemical and oxygen stable isotope variations suggests that the sub-surface groundwater (from phreatic and shallow confined aquifers) is being recharged by modern precipitations and local river infiltrations. Four hydrogeological provinces have been recognised and mapped in the Friuli Venezia Giulia Plain having similar geochemical signatures. These provinces have different degrees of vulnerability to contamination. The deep confined groundwater samples are significantly less impacted by surface activities; and it appears that these important water resources have very low recharge rates and would, therefore, be severely impacted by overabstraction.     

Effect of the dilution process on the attenuation of contaminants in aquifers

This paper discusses the effects of the dilution process on levels of aquifer contamination attenuation, developing analytical equations for application in theoretical and practical cases. The key finding is that, in aquifers, the dilution process causes a reduction of the contaminant concentration. Analytical equations for the assessment of the contaminant attenuation capacity, by means of the dilution process in an aquifer, are put forward. In particular, the attenuation of the contaminant concentration in an aquifer, and thus the dilution, is described by the volumetric flow rate per unit width perpendicular to the flow direction (q _u). Moreover, a classification of q _u was developed, considering six classes of attenuation capacity due to dilution. For the equations validation, nitrate contamination attenuation due to dilution was analysed in two sample areas in Piedmont (North-West Italy). The results confirmed the hypothesis, evidencing high nitrate concentrations in areas with low q _u values, connected to low dilution rate of the contaminant in the groundwater; vice versa, low nitrate concentrations were evidenced in areas with high q _u values, due to a high nitrate dilution rate.     

Treatment of ground-motion predictive relationships for the reference seismic hazard map of Italy

In the framework of the 2004 reference seismic hazard map of Italy the amplitude of the strong-motion (expressed in terms of Peak Horizontal Acceleration with 10% probability of non-exceedence in 50 years, referred to average hard ground conditions) was computed using different predictive relationships. Equations derived in Italy and in Europe from strong-motion data, as well as a set of weak and strong-motion based empirical predictive relationships were employed in a logic tree procedure, in order to capture the epistemic uncertainty affecting ground-motion attenuation. This article describes the adjustments and conversions required to eliminate the incompatibilities amongst the relations. Particularly significant are distance conversions and style-of-faulting adjustments, as well as the problems related to the use of regional relations, such as the selection of a reference depth, the quantification of random variability and the strong-motion prediction. Moreover, a regional attenuation relationship specific for volcanic areas was also employed, allowing a more realistic evaluation of seismic hazard, as confirmed by the attenuation of macroseismic intensities.     

A cross-border regional earthquake early warning system: PRESTo@CE3RN

Since 2002 the Istituto Nazionale di Oceanografia e di Geofisica Sperimentale (OGS) in Udine (Italy), the Agencija Republike Slovenije za Okolje (ARSO) in Ljubljana (Slovenia) and the Zentralanstalt für Meteorologie und Geodynamik (ZAMG) in Vienna (Austria), are collecting, analyzing, archiving and exchanging seismic data in real time, initially in the framework of the EU Interreg IIIa Italia-Austria project “Trans-national seismological networks in the South-Eastern Alps”. As outcome of the successful cooperation, in the 2013 OGS, ARSO and ZAMG decided to officially merge their seismic monitoring efforts into the “Central and Eastern European Earthquake Research Network—CE³RN”. This work reports the results of a nine-month real-time test of the earthquake early warning (EEW) algorithm probabilistic and evolutionary early warning system carried out at the CE³RN. The study allowed identifying the actions to be implemented in order to let the CE³RN become in the next future an efficient cross-border EEW system.