New insight on the genus Nolaniceras Casey, 1961 (Ammonoidea,Cretaceous) and its consequences on the biostratigraphy of the Aptian Stage

Nolaniceras nolani ( Seunes, 1887) has been widely quoted in the Upper Aptian literature over the years. Re-examination of the holotype of the species shows that it has always been misidentified and that this taxon is represented by a single specimen, the holotype, of uncertain age. As a consequence, its use as an index species for the Upper Aptian should be reconsidered and abandoned.     

Effects of the geometry of two‐dimensional fractures on their hydraulic aperture and on the validity of the local cubic law

Flow through rough fractures is investigated numerically in order to assess the validity of the local cubic law for different fracture geometries. Two‐dimensional channels with sinusoidal walls having different geometrical properties defined by the aperture, the amplitude, and the wavelength of the walls' corrugations, the corrugations asymmetry, and the phase shift between the two walls are considered to represent different fracture geometries. First, it is analytically shown that the hydraulic aperture clearly deviates from the mean aperture when the walls' roughness, the phase shift, and/or the asymmetry between the fracture walls are relatively high. The continuity and the Navier–Stokes equations are then solved by means of the finite element method and the numerical solutions compared to the theoretical predictions of the local cubic law. Reynolds numbers ranging from 0.066 to 66.66 are investigated so as to focus more particularly on the effect of flow inertial effects on the validity of the local cubic law. For low Reynolds number, typically less than 15, the local cubic law properly describes the fracture flow, especially when the fracture walls have small corrugation amplitudes. For Reynolds numbers higher than 15, the local cubic law is valid under the conditions that the fracture presents a low aspect ratio, small corrugation amplitudes, and a moderate phase lag between its walls.     

Petrography of alluvial sands as a past and present environmental indicator: Case of the Loire River (France)

Four sample sets of the Upper and Middle Loire river sands were analyzed in order to study the impact of natural and anthropogenic factors on their petrographic composition in space (on an 800 km stretch) and time. Composition was determined by modal analysis of three sand-size fractions using a polarizing optical microscope and calculated for each sample (“standard sand” = Sst). The watershed is composed mainly of endogenic (Massif Central) and sedimentary (southern Parisian Basin) rocks. B-set sands collected in channels for different water flows in 1996 show that Sst compositions vary by only 5 %. Present-day sands in the Upper Loire and Middle Loire have very high petrographic immaturity comparing to others worldwide fluvial sands, although bio-climatic conditions favor sand maturation by source-rock weathering in the watershed. This shows the strong impact of the Massif Central on sediment yield due to relief rejuvenation as a consequence of the formation of the Alps during the Quaternary. Fluvial sands stored during the Weichselian and the Holocene in the Middle Loire floodplain, although partly weathered since their deposition, show higher inputs from the endogenic rocks of the Massif Central than present-day deposits. This can be explained by Weichselian periglacial conditions and the development of crop farming since the Neolithic, which favored mechanical erosion, particularly in the Massif Central which is characterized by a cold, humid climate and steep slopes. The upstream-downstream change in the composition of presently deposited sand is low in the diked area. It shows however that basalt and some heavy mineral grains are vulnerable to abrasion during transport and indicates a marked sediment yield from ancient sediment stored in the floodplain. This is in line with the high incision of the river bed over the last 150 years partly due to dam construction and aggregate mining.     

Crack nucleation in saturated porous media

Crack nucleation has been the subject of important contributions in the last two last decades. However, it seems that few attention has been granted to the case of saturated porous media. This is the question addressed in the present paper which is devoted to nucleation in traction mode. From a physical point of view, nucleation is a sudden phenomenon, so that the material response is both adiabatic and undrained. In the spirit of the variational approach, the nucleated crack is viewed as the final state of a region of space in which the material undergoes a full damage process. In traction mode, the opening of a saturated crack in undrained condition induces a drop of fluid pressure. In case of low fluid compressibility, the presence of the fluid delays the brittle failure usually associated with nucleation, as long as the fluid pressure remains above the saturation vapor pressure. Nucleation is therefore possible only if a partial vaporization of the fluid takes place.     

The multiple chronological techniques applied to the Lake Suigetsu SG06 sediment core,central Japan

The varved sediment of Lake Suigetsu (central Japan) provides a valuable opportunity to obtain high‐resolution, multi‐proxy palaeoenvironmental data across the last glacial/interglacial cycle. In order to maximize the potential of this archive, a well‐constrained chronology is required. This paper outlines the multiple geochronological techniques being applied – namely varve counting, radiocarbon dating, tephrochronology (including argon–argon dating) and optically stimulated luminescence (OSL) – and the approaches by which these techniques are being integrated to form a single, coherent, robust chronology. Importantly, we also describe here the linkage of the floating Lake Suigetsu (SG06) varve chronology and the absolute (IntCal09 tree‐ring) time scale, as derived using radiocarbon data from the uppermost (non‐varved) portion of the core. This tie‐point, defined as a distinct (flood) marker horizon in SG06 (event layer B‐07–08 at 1397.4 cm composite depth), is thus derived to be 11 255 to 11 222 IntCal09 cal. years BP (68.2% probability range).     

In situ experimentation at the water/sediment interface in the deep sea: 1. Submersible experimental instrumentation developed for sampling and incubation

In order to make progress in the study of processes in deep-sea ecosystems, we have developed a strategy for the use of submersibles in conjunction with free vehicles. The BIOCYAN programme, which was conducted by French oceanographers at a permanent station in the Bay of Biscay, involved the use of submersibles for benthic ecological studies. It lead to the development of a variety of equipment for sampling and experimental studies. The submersible Cyana has a limited equipment workload, so the initial step was to develop a free vehicle which could function as a shuttle to act as an independent transport for equipment to be used from the submersible. Two other devices have been developed for sampling with precision the surficial layers of the sediment, one of which can be used in conjunction with an injection module to measure rates of processes in situ by incubations, following injection with labelled substrates. These devices, the free-lift shuttle, tube corers, a blade box corer and the associated injection module are described.     

Coastal neotectonics in Southern Central Andes: uplift and deformation of marine terraces in Northern Chile (27°S)

Neotectonic observations allow a new interpretation of the recent tectonic behaviour of the outer fore arc in the Caldera area, northern Chile (27°S). Two periods of deformation are distinguished, based on large-scale Neogene to Quaternary features of the westernmost part of the Coastal Cordillera: Late Miocene to Early Pliocene deformations, characterized by a weak NE–SW to E–W extension is followed by uppermost Pliocene NW–SE to E–W compression. The Middle Pleistocene to Recent time is characterized by vertical uplift and NW–SE extension. These deformations provide clear indications of the occurrence of moderate to large earthquakes. Microseismic observations, however, indicate a lack of shallow crustal seismicity in coastal zone. We propose that both long-term brittle deformation and uplift are linked to the subduction seismic cycle.     

Barium uptake into the shells of the common mussel (Mytilus edulis) and the potential for estuarine paleo-chemistry reconstruction

In this study we test if calcite shells of the common mussel, Mytilus edulis, contain barium in proportion to the water in which they grew. Similar to all bivalves analyzed to date, the [Ba/Ca]_shell profiles are characterized by a relatively flat background [Ba/Ca]_shell, interrupted by sharp [Ba/Ca]_shell peaks. Previous studies have focused on these [Ba/Ca]_shell peaks, but not on the background [Ba/Ca]_shell. We show that in both laboratory and field experiments, there is a direct relationship between the background [Ba/Ca]_shell and [Ba/Ca]_water in M. edulis shells. The laboratory and field data provided background Ba/Ca partition coefficients (D_Ba) of 0.10 ± 0.02 and 0.071 ± 0.001, respectively. This range is slightly higher than the D_Ba previously determined for inorganic calcite, and slightly lower than foraminiferal calcite. These data suggest that M. edulis shells can be used as an indicator of [Ba/Ca]_water, and therefore, fossil or archaeological M. edulis shells could be used to extend knowledge of estuarine dissolved Ba throughputs back in time. Moreover, considering the inverse relationship between [Ba/Ca]_water and salinity, background [Ba/Ca]_shell data could be used as an estuary specific indicator of salinity. The cause of the [Ba/Ca]_shell peaks is more confusing, both the laboratory and field experiments indicate that they cannot be used as a direct proxy of [Ba/Ca]_water or phytoplankton production, but may possibly be caused by barite ingestion.     

Assimilation of Hourly Surface Observations with the Canadian High-Resolution Ensemble Kalman Filter

An hourly-cycling ensemble Kalman filter (EnKF) working at 2.5?km horizontal grid spacing is implemented over southern Ontario (Canada) to assimilate Meteorological Terminal Aviation Routine Weather Reports (METARs) in addition to the observations assimilated operationally at the Canadian Meteorological Centre. This high-resolution EnKF (HREnKF) system employs ensemble land analyses and perturbed roughness length to prevent an ensemble spread that is too small near the surface. The HREnKF then performs continuously for a four-day period, from which twelve-hour ensemble forecasts are launched every six hours. The impact on analyses and short-term forecasts of assimilating METAR data is given special attention.

It is shown that using ensemble land surface analyses increases near-surface ensemble spreads for temperature and specific humidity. Perturbing roughness length enlarges the spread for surface wind. Given sufficient ensemble spread, the four-day case study shows that the near-surface model state is brought closer to surface observations during the cycling process. The impact of assimilating surface data can also be seen at higher levels by using aircraft reports for verification. The ensemble forecast verification suggests that METAR data assimilation improves ensemble forecasts of air temperature and dewpoint near the surface up to a lead time of six hours or even longer. However, only minor improvement is found in surface wind forecasts.