Error analysis in hypocentral locations at Phlegraean Fields

The location reliability of the earthquakes occurred at Phlegraean Fields has been analyzed, and the theoretical errors, inferred from the diagonal elements of the covariance matrix, have been estimated. Using only first P-phase arrivals to the local network (22 stations) and assuming a reading error of 0.05 sec., the average error on the spatial coordinates is estimated to be of the order of 0.2 km.Shallow events (depth<1 km) are very poorly constrained in depth at the borders of the network. The use of both P and S arrival times, recorded by a smaller three component network (10 stations), improves the depth determination.Further analysis has been performed on a set of about 350 selected earthquakes, using two different velocity models.Differences in depth considerably greater than the theoretical errors, and showing highly different patterns have been found.Tests with artificial events, randomly distributed in space, indicate that the observed depth distribution is essentially due to the used velocity model.     

Hydraulics of runoff and loess loam deposition

On many more or less loamy soils, rill erosion is reported to start on slopes that are equal to or steeper than 2–3°; critical Froude numbers for the start of rill wash on these slopes vary between 2·0 and 3·0. This explains why colluvial deposition often occurs on slopes below 2–3°, when water spreads out at the downslope extremities of the rills. The critical hydraulic conditions for loess loam deposition were tested in the laboratory for slopes of 0·5° and 2°, applying unit-discharges (q) up to 10 cm²/s. It appeared from these experiments that for afterflow, without raindrop impact, deposition starts for critical load concentrations (c_cr) varying between several g/1 and about 60 g/l. Under rain c_cr amounts to a minimum value of 100–125 g/l and it increases when the runoff film becomes thinner. Nevertheless, deposition in pluvial runoff is also possible, as was the case during the Weichselian, according to data from quarries in Belgium and in The Netherlands. A modified Kalinske equation is proposed for c_cr prediction, with the introduction of a typical empirical coefficient C_r and considering such factors as shear stress and mean particle size. Massive sedimentation may occur when it stops raining and afterflow starts, since c_cr values are then much lower. It is shown from the Shields' diagram that loamy suspensions are more sensitive to sedimentation than sands in clear water.     

K-Ar ages of basic rocks in the Patia Valley, southwest Colombia

The Patia Valley situated between the Western and Central Cordilleras of the southwest Colombian Andes contains two areas in which Mesozoic basic and ultrabasic rocks crop out in abundance. Late Cretaceous Diabase Group pillow basalts which make up much of the Western Cordillera are at least 81 ± 5 Ma in the E1 Tambo-E1 Peñol area. 105-97 Ma hornblende and whole-rock dates from the ophiolitic Los Azules complex indicate an Albian age of formation, although many dates are lower (65-62 Ma) owing the low-grade ocean-floor metamorphism. The metamorphic age distribution here supports an end of Cretaceous emplacement for the complex rather than the Early-Mid Cretaceous emplacement suggested for North Colombian ophiolites similarly aligned along the Romeral fault system. Tertiary dacites intruding the Low Azules complex are 36-15 Ma.     

Evolution of polycyclic alkanes in the Espirito Santo Basin

The distributions of polycyclic alkanes were monitored in a Neocomian sequence (well 1-ESS-34) from the Espirito Santo Basin, southeast Brazil. The profiles included, apart from regular hopanes, significant concentrations of 18α(H), 28,30-bisnorhopane and subordinate amounts of gammacerane. Sterane concentrations, normally with hopane/sterane <5, were compatible with other geochemical data indicating a predominantly planktonic/microbial source of the deposited organic matter. Sample maturities ranged from very immature to the onset of oil generation, allowing biomarker distributions to be followed along a broad maturation range. The ability of certain molecular ratios (e.g. C₂₇ 17α(H)/17β(H)hopanes) to reflect a maturity sequence with depth in the closely-spaced strata of the immature upper levels (Jiquiá Stage) showed the value of molecular techniques over classical geochemical methods (e.g. vitrinite reflectance) for the study of immature sequences. The presence in the oils of southern Espirito Santo of 28,30-bisnorhopane, gammacerane and methyl steranes in similar concentrations as in extracts of the deepest levels of the 1-ESS-34 well qualify the Jiquia Stage as the probable source rock of oils accumulated in the basin.     

Bacterial contribution to sedimentary organic matter; a comparative study of lipid moieties in bacteria and Recent sediments

A systematic study of the lipid composition of thirteen bacterial species and three Recent sediments (methanogenic sediment, cyanobacterial mat and evaporative gypsum crust) was undertaken in an attempt to recognize bacterial organic matter in sediments. A sequential method, which distinguishes between three different modes of occurrence of lipid moieties (free, OH⁻- and H⁺-labile), was applied. The acid-labile fractions are discussed.The three main groups of bacteria, archaebacteria, gram-positive eubacteria and gram-negative eubacteria, are easily distinguished. Methanogenic and extremely halophilic archaebacteria are characterized by the presence of diphytanyl glyceryl ether and the absence of fatty acids. The gram-positive eubacteria contain primarily iso- and anteiso-branched fatty acids whereas the gram-negative bacteria and sediments are dominated by β- and α-hydroxy fatty acids. A wide variety of H⁺-labile hydroxy fatty acids was observed which included several, as yet unknown, structures.β-Hydroxy fatty acids in this H⁺-labile mode of occurrence are exclusively present in bacteria. Their distribution patterns in sediments are considered “fingerprints” of past and present bacterial populations. The specific differences in β -hydroxy fatty acid compositions observed in the different bacteria and the three sediments investigated, suggest that amide-linked β-hydroxy fatty acid patterns are useful as markers of bacterial populations and therefore of environmental conditions.     

Coastal slope terracing and relative sea-level changes: Deductions based on computer simulations

Although a traditional geological survey of terraced coastal slopes is an essential part of studies aimed to reconstruct relative sea-level changes, the stratigraphic and chronological data so obtained frequently prove inadequate to completely unravel the sometimes very complex history of sea-level fluctuation, especially where erosion has prevailed over deposition and/or deposits are difficult to date. On the basis of our experience we think that much additional information can be gained through geomorphological interpretation of the profiles of those slopes. In order to facilitate such interpretation, a computer simulation model is developed that is able to predict the morphogenic response to a variety of possible relative-sea-level histories. The results can be used to envisage some new interpretation keys for the analysis of real situations and, hopefully, as bases for the conception of general models of coastal slope evolution under the action of a variable sea level. Though preliminary, the results so far obtained permit identification of the geomorphological consequences (in terms of resulting slope profile) of ordered successions of transgressions and regressions of different amplitude, rate, order and style. Moreover they provide interesting insights into the role that different styles of tectonic uplift may play in the phenomenon of multiple terracing of coastal slopes.     

Understanding the inelastic seismic behaviour of asymmetric-plan buildings

Studied in this paper is the inelastic seismic behaviour of asymmetric-plan buildings using the histories of base shear and torque. The first step in understanding this behaviour is to construct the base shear and torque surface (BST) for the building, which represents all combinations of shear and torque that applied statically lead to collapse of the structure. Several factors controlling the shape of this surface, such as strength eccentricity and bidirectional ground motion, are identified. Also, their effects on the building responses are studied considering several structural configurations. The results obtained show that the BST surface, in conjunction with the base-shear and torque histories, provides a useful conceptual framework for understanding the behaviour of asymmetric systems. Furthermore, using these surfaces, relevant aspects of the behaviour and design of such buildings become apparent even before dynamic analysis of the structure.     

Multispectral remote sensing of biomass burning in West Africa

Remote sensing measurements provide a vauable means of determining the extent of burning areas and of estimating the overall distribution of pollutant sources (identified from experimental studies) in time and space. This distribution has to be taken into account in the boundary conditions of chemistry atmospheric models.Recent methods developed for the remote sensing of active fires in tropical or temperated forest zones, have been found to be completely inadequate for fire detection on West African savannas. In order to accurately estimate the active fire distribution in the function of different sorts of West African savannas (Sahelian, Sudanian and Guinean) and forests, a multispectral methodology has been developed based on NOAA/11-AVHRR satellite data, with the purpose of eliminating as much as possible the problems related to large surface heterogeneity, confusion and bias, produced by clouds, smoke, haze, background emissivities, etc.Unlike other methods, the results show that the multispectral method, in spite of its selectivity, provides realistic results, and does not under- or over-estimate the number of fires that can be sensed by the satellite. Consequently, this methodology is more appropriate than the simplest ones for a systematic sensing of this phenomenon.     

The southern cape conductive belt (South Africa): Its composition, origin and tectonic significance

Magnetometer array studies have led to the discovery and mapping of the Southern Cape Conductive Belt (SCCB) crossing the southern tip of Africa from west to southeast coasts. The SCCB lies just south of the Namaqua-Natal Belt of cratonic rocks remobilized about 1000 m.y. B.P. It is shown that it coincides with a zone of weakness which has been exploited by three major geosynclinal accumulations over some 600 m.y. Relationships between the SCCB and the basement geochronology, geology and tectonics are considered in detail. These relationships support the view that the conductive belt was formed by an accumulation of marine sediments and oceanic lithosphere at the top of a Proterozoic subduction which stopped about 1000 to 800 m.y. B.P. Associated with this subduction we propose a Proterozoic range of Andean mountains, whose roots are now exposed in the Namaqua-Natal Belt. Later subduction further south, near the present south coast, is proposed to account for the intrusion, between the south coast and the SCCB, of the Cape Granites in the time interval 600-500 m.y. B.P. There is some evidence for a third, yet more distant, subduction episode off Permian Gondwanaland. After outlining this tectonic history, the paper turns to a closer examination of the hypothesis that the Southern Cape Conductive Belt consists of partly serpentinized basalt accumulated at the top of a Proterozoic subduction. A large static magnetic anomaly, which correlates with the SCCB over most of its length, is well fitted by a model which strongly supports this hypothesis. Bouguer gravity anomalies along western and central profiles likewise support the hypothesis. A discussion follows of the process of formation of the proposed block of serpentinized marine rocks, beginning with serpentinization of the crust near oceanic ridges by reaction of warm, porous, newly-extruded basalt with seawater convecting through it. The serpentinized basalt is stable at crustal temperatures and pressures and so is transported in the seafloor until it reaches a subduction, where it accumulates because of its low density. Examples of such accumulations are cited. Finally, it is shown that any iron in the olivine and pyroxene in the original basalt precipitates, when these silicates are hydrated to serpentine, as magnetite which is the dominant mineral conferring high electrical conductivity and high magnetic susceptibility on serpentinites. In particular the Beattie static magnetic anomaly requires, in our model calculation, a very high susceptibility readily attainable in basalt at 15–20% serpentinization. The authors know of no other rock able to provide this high susceptibility. A similar percentage of serpentinization provides the density required to model the gravity anomalies.     

Production and pelagic dissolution of biogenic silica in the Southern Ocean

Vertical distributions of particulate silica, and of production and dissolution rates of biogenic silica, were determined on two N-S transects across the Pacific sector of the Antarctic Circumpolar Current during the austral spring of 1978. Particulate silica profiles showed elevated levels in surface water and near the bottom, with low (35–110 nmol Si · 1^?1) and vertically uniform values through the intervening water column. Both the particulate silica content of the upper 200 m and the production rate of biogenic silica in the photic zone increased from north to south, reaching their highest values near the edge of the receding pack ice. A significant, but variable, fraction (18–58%) of the biogenic silica produced in the surface layer was redissolving in the upper 90–98 m. Net production of biogenic silica in the surface layer (production minus dissolution) was proceeding at a mean rate of ca. 2 mmol Si · m^?2 · day^?1. This is ca. 4 times greater than the most recent estimate of the mean accumulation rate of siliceous sediments beneath the ACC. We estimate, based on mass balance, that the mean dissolution rate of biogenic silica in subsurface water column in the Southern Ocean is 1.2–2.9 mmol Si · m^?2 · day^?1.