Influencing factors of seed long-distance dispersal on a fragmented forest landscape on Changbai Mountains,China

Seed long-distance dispersal(LDD) events are typically rare, but are important in the population processes that determine large-scale forest changes and the persistence of species in fragmented landscapes. However, previous studies focused on species dispersed via animal-mediated LDD, and ignored those dispersed by wind. The aim of this study was to assess the effects of canopy openness, edge, seed source, and patch tree density on the LDD of seeds by wind in forest. We collected birch seeds, a typical wind-dispersed species, throughout a larch plantation. We then assessed the relationship between birch LDD and each factor that may influence LDD of seeds by wind including distance to edge, canopy openness size, distance to mature forest, and the tree density of the larch plantation. We used univariate linear regression analysis to assess the influence of those factors on birch LDD, and partial correlations to calculate the contribution of each factor to LDD. The results showed that both canopy openness and edge had significant influences on birch LDD. Specifically, a negative relationship was observed between distance to edge and birch LDD, whereas there was a positive correlation between canopy openness size and LDD. In contrast, the distance to the mature forest was not correlated with birch LDD. Our results suggest that patch tree density could potently affect the probability of LDD by wind vectors, which provides novel and revealing insights regarding the effect of fragmentation on wind dynamics. The data also provide compelling evidence for the previously undocumented effect of habitat fragmentation on wind-dispersed organisms. As such, these observations will facilitate reasonable conservation planning, which requires a detailed understanding of the mechanisms by which patch properties hamper the delivery of seeds of wind-dispersed plants to fragmented areas.     

考虑方位漂移的水平井井眼轨道设计

目前,深层页岩气水平井在钻井过程中经常出现方位漂移的问题,方位漂移严重影响了水平井的井眼轨迹控制,进而影响水平井的准确中靶。在现场施工中,通常根据施工区以前的钻井经验,在进行定向造斜时,先估计出一个“方位超前角”,这种现场的做法有着很大的不确定性,并且可能出现较大误差。本文提出了考虑方位漂移的水平井井眼轨道优化设计的方法,解决了仅凭现场经验给出的“超前角”不准确的问题。考虑方位漂移的水平井井眼轨道优化设计按照井段划分,将地层因素与井身剖面结合起来求取井段的平均方位漂移率。根据该方法研制开发了考虑方位漂移的水平井井眼轨道优化设计软件,并通过举例进行了验证,证明了方法是可行的。     

地质导向技术在L型煤层气水平井 T-P05井中的应用

通过分析山西L型煤层气水平井的技术难点,着重建立造斜着陆与水平段导向两大导向模型,形成了以标志层划分与对比、地层倾角推算、地质建模和实时轨迹控制四个方面为主的L型煤层气水平井地质导向技术流程,该技术在T-P05井的成功应用,不仅丰富了煤层气水平井地质导向技术的内容与方法,更进一步验证了该技术在现场具有较强的可操作性和良好的应用前景,值得大力推广。     

贵州松桃高地特大型富锰矿床主要地质特征

位于贵州铜仁松桃国家锰矿整装勘查区内的高地富锰矿床,(332)+(333)类碳酸锰富锰矿石资源量达7 166. 84万吨,锰平均品位25. 75%,矿体平均厚度4. 52 m,富锰矿体赋存于总资源量达1. 61亿吨的高地超大型锰矿床之中,由一个单一的富锰矿体构成,是我国新发现的首个特大型富锰矿床,富锰矿资源量相当于我国富锰矿资源量总和的2倍。成因类型属古天然气渗漏沉积型锰矿床,富锰矿产于古天然气渗漏沉积成矿系统中心相区。高地富锰矿床地处独特的"新月形"南华纪早期李家湾-高地-道坨(Ⅳ级)地堑盆地中心,菱锰矿体中均出现以块状构造夹被沥青充填的气泡状富菱锰矿石。地表燕山期北北东向的断裂构造十分发育,但主要为上陡下缓犁式正断层,未触及高地深部隐伏巨型锰矿体,以致富锰矿体保存亦十分完整,易于开发利用。     

利用GPR天线-目标极化的瞬时属性分析方法探测LNAPL污染土壤

轻非水相流体(LNAPL)泄漏后会对土壤和地下水造成严重污染,为了准确探测出LNAPL泄漏范围,本文将GPR天线-目标极化的瞬时属性分析方法应用于轻非水相流体污染土壤探测的研究中。采用注入柴油的石英砂砂箱在实验室建立污染土壤模型,利用探地雷达对该污染土壤分别进行天线方位为0°、90°的测量。LNAPL土壤污染物形状、大小、结构并不规则,因此可以通过0°和90°方位天线测量来分析天线-目标极化特征,了解目标物的走向、形状等地下介质信息。通过对预处理后的包含天线-目标极化特征的信息进行瞬时属性分析,LNAPL污染范围可以被清晰地识别,提高了GPR探测能力。     

滇东南富宁地区基性侵入岩及喷出岩时代

在滇东南富宁地区基性侵入岩、喷出岩较发育,前人将其划分为"半瓦型"侵入岩、"安定型"侵入岩和"龙康型"喷出岩3类,3类岩石普遍缺乏可靠的同位素年代学资料。在对富宁地区基性侵入岩、喷出岩进行区域地质调查的基础上,应用LAICP-MS技术对其进行锆石U-Pb测年,在半瓦型侵入岩和安定型侵入岩中分别获得了254.0±2.0Ma和244.2±4.4Ma的加权平均年龄,在龙康型喷出岩中获得251.9±3.0Ma和255.92±0.72Ma加权平均年龄。结合野外调查和综合研究,将富宁地区"安定型"侵入岩的时代界定于中三叠世,将"半瓦型"侵入岩和"龙康型"喷出岩的时代界定于晚二叠世。     

A simple approach to evaluating leakage through thin impervious element of high embankment dams

Internal erosion is the most common reason which induces failure of embankment dams besides overtopping. Relatively large leakage is frequently concentrated at defects of impervious element, and this will lead to eventual failure. The amount of leakage depends not only on integrity of impervious element, but also on dam height, shape of valley, shape of impervious element and water level in reservoir. The integrity of impervious element, which represents the relative level of seepage safety, is not easy to be determined quantitatively. A simple method for generalization of steady seepage state of embankment dams with thin impervious element is proposed in this paper. The apparent overall value of permeability coefficient for impervious element can be obtained by this method with reasonable accuracy and efficiency. A defect parameter of impervious element is defined as an index to characterize seepage safety of embankment dams. It equals the ratio of the apparent overall value of permeability coefficient to the measured value in laboratory for intact materials. Subsequently, seepage safety of three dams is evaluated and the evolution of defect level of impervious element of dams is investigated. It is proved that the newly proposed method in this paper is feasible in the evaluation of relative seepage safety level of embankment dams with thin impervious element.     

A direction-dependent shear strength criterion for rock joints with two new roughness parameters

The surface morphology of a rock joint is closely related to its mechanical properties. To reasonably characterize a rock surface, two new roughness parameters were proposed in this paper. One is related to the average slope angle of asperities that contribute to the shear strength, and the other reflects the frictional behavior of asperities that is defined as the maximum possible contact area in the shear direction. Taking the standard joint roughness coefficient profiles as example, these two roughness parameters can be applied to describe the directional characteristics of shear strength. Based on their relationships with initial dilation angles, the proposed roughness parameters were incorporated into a peak shear strength criterion. It is shown that the predicted peak shear strength is consistent with experimental data, and there is a power–law relationship. The application range of new roughness parameters was determined, which may facilitate a measurement process.     

3D打印技术在矿床学中的应用研究——以内蒙古乌力吉敖包萤石矿Ⅲ号矿体为例

3D打印(3D printing)是一种以三维模型为样本的快速成形技术,它通过逐层打印或粉末熔铸的方式来构造需要的立体图形。本文从3D打印技术的原理及其发展现状入手,重点列举内蒙古乌力吉敖包萤石矿,利用3D打印机打印具有现实可观性的地质体实体,探讨3D打印技术作为新兴的科技手段应用于矿床学教学与研究的应用价值和发展前景。研究发现,3D打印技术在矿体三维可视化中的应用符合地质图件立体化和3D打印技术多领域化的趋势,未来3D打印技术在地质领域的应用也有助于开拓矿床学教学和研究的新方式与新思路。