Electrochemical Ozone Production as an Environmentally Friendly Technology for Water Treatment

Perspectives, advances and environmental aspects concerning electrochemical ozone production applied to water purification are presented and discussed in relation to the conventional corona process (silent electric discharge). Ozone generated using a laboratory‐made electrochemical reactor was applied for the discoloration/degradation of dyes used in the Brazilian textile industry and for degradation of endocrine disruptors. A constant ozone load of 0.35 ± 0.02 g/h was used throughout. The study, concerning color removal from dye solutions, revealed that total discoloration is rapidly achieved. The degradation rate of the textile dyes evaluated by TOC is little affected by the dye composition and considerably influenced by the pH and ozonation time. Analysis of the COD/TOC‐ratio indicates that ozonation increases oxidation feasibility of the organic matter (dye by‐products) when compared to the original compounds. Ozonation of mixed aqueous solutions containing different endocrine disruptors revealed these compounds are totally degraded with a very high removal rate.     

Paleomagnetic constraints on the Plio–Pleistocene geodynamic evolution of the external central–northern Apennines (Italy)

We report on new paleomagnetic results obtained from 27 sites sampled in the Plio–Pleistocene sequences at the external front of the central–northern Apennines. Previous analyses of Miocene (Messinian) sediments indicated that the present shape of the northern Apenninic arc is due to the oroclinal bending of an originally straight belt oriented around N320° and that vertical axis rotations accompanied the migration of the thrust fronts toward the Adriatic foreland [F. Speranza et al., J. Geophys. Res. 102 (1997) 3153–3166]. We tried to provide new paleomagnetic constraints for the timing and rates of the oroclinal bending process during the Pliocene and the Pleistocene. The results suggest that CCW rotations observed in the northern part of the studied area are possibly younger than 3 Ma. No regional rotation is recorded in the Pliocene and Pleistocene sediments from the southern part of the study area, analogously to the Messinian sediments of the ‘Acquasanta’ domain of Speranza et al. [F. Speranza et al., J. Geophys. Res. 102 (1997) 3153–3166]. A local significant CCW rotation (23°±10°) is identified in the Early Pleistocene sediments that crop out along the Adriatic coast between Ascoli and Pescara, indicating differential motion of the thrust sheets. This rotation must be younger than 1.43 Ma.     

Failure analysis of the granite for a dam foundation

This paper presents the numerical and experimental investigation of a dam foundation. The site consists of granite and especially weathered granite. Numerical and analytical analyses have been conducted to evaluate suitability of the granite for a dam foundation. Mohr–Coulomb failure criterion has been used to calculate the compressive strength of the rock mass. Finite element implementation of Mohr–Coulomb criterion has been used for deformation and settlement analysis. Packer testing and in-situ estimation of rock mass deformability using the Goodman jack have been performed. The results of the evaluations show that very small normal and differential settlements can be expected in structural regions due to dam construction, and the compacted concrete dam can safely be constructed on either the competent granite or the weathered granite. However, the dam foundation on the weathered granite has high conductivity potential problems for the reservoir.     

Mineralogy,chemistry, and grain size composition of recent sediments in the northern Tyrrhenian Sea: Contribution to the study of sediment transport and distribution

As a contribution to an environmental study on Tuscany's marine shelf, textural, mineralogical, and chemical characteristics of recent sediments in the northern Tyrrhenian Sea between Elba Island and Livorno have been analyzed. The data provide clear information on sediment sources and movement patterns. The main sediment source appears to be the Cecina River; very subordinate is the contribution of the Fine River. As to sediment movement patterns, the surveyed basin appears to be divided into two subbasins: (1) a greater, southern subbasin, bounded by Tuscany mainland, Elba Island and Elba Ridge, and Capraia Isle, and Vada Shoals; and (2) a smaller, northern subbasin, enclosed between Vada Shoals and Meloria Shoals (off Livorno port).In the former the coarse-grade Cecina River sediments are transported southward along most of the mainland coast by littoral drift and coastal current; a northward flowing countercurrent seems to be active only in the southernmost part. Silts and clays are distributed in concentric belts around basin's central part, being transported mainly by slow circular water movements. In the marginal western zone, very little terrigenous influx is coupled with a high biologic productivity, and biogenic debris sedimentation prevails there.In the northern subbasin the sediment contribution from Fine River is more appreciable. Here the environmental energies are very low and the coarse sediments are restricted to a few small pocket beaches where they are deposited by local creeks. Most of the subbasin area is occupied by sapropelitic muds, again distributed by slow small-scale gyres.     

Magnetic fabrics and their relationship with the emplacement of the Piracaia pluton,SE Brazil

Magnetic fabric and rock-magnetism studies were performed on the four units of the 578 ± 3-Ma-old Piracaia pluton (NW of São Paulo State, southern Brazil). This intrusion is roughly elliptical (~32 km²), composed of (i) coarse-grained monzodiorite (MZD-c), (ii) fine-grained monzodiorite (MZD-f), which is predominant in the pluton, (iii) monzonite heterogeneous (MZN-het), and (iv) quartz syenite (Qz-Sy). Magnetic fabrics were determined by applying both anisotropy of low-field magnetic susceptibility (AMS) and anisotropy of anhysteretic remanent magnetization (AARM). The two fabrics are coaxial. The parallelism between AMS and AARM tensors excludes the presence of a single domain (SD) effect on the AMS fabric of the units. Several rock-magnetism experiments performed in one specimen from each sampled units show that for all of them, the magnetic susceptibility and magnetic fabrics are carried by magnetite grains, which was also observed in the thin sections. Foliations and lineations in the units were successfully determined by applying magnetic methods. Most of the magnetic foliations are steeply dipping or vertical in all units and are roughly parallel to the foliation measured in the field and in the country rocks. In contrast, the magnetic lineations present mostly low plunges for the whole pluton. However, for eight sites, they are steep up to vertical. Thin-section analyses show that rocks from the Piracaia pluton were affected by the regional strain during and after emplacement since magmatic foliation evolves to solid-state fabric in the north of the pluton, indicating that magnetic fabrics in this area of the pluton are related to this strain. Otherwise, the lack of solid-state deformation at outcrop scale and in thin sections precludes deformation in the SW of the pluton. This evidence allows us to interpret the observed magnetic fabrics as primary in origin (magmatic) acquired when the rocks were solidified as a result of magma flow, in which steeply plunging magnetic lineation suggests that a feeder zone could underlie this area.     

Typical source areas of May 1998 flow-like mass movements in the Campania region, Southern Italy

Flow-like mass movements in granular materials are among the most serious natural hazards, systematically producing huge amounts of damage and numerous victims, especially when involving volcanic soils. This is the case of the events in Southern Italy in May 1998, when rainfall triggered many destructive landslides along the slopes of a carbonate massif mantled by pyroclastic soils. Due to the complexity of the occurred phenomena, a shared interpretation of their triggering stage is still not available.

As a contribution to the topic, the paper initially discusses the geological and geomorphological features of the massif combining them in three hillslopes models. The models are then associated to the hydrogeological features and anthropogenic factors in order to define six typical landslides source areas that are not casually distributed on the massif. The study subsequently focuses on the most frequent type of source areas, associated to the largest unstable soil volumes and longest run-out distances. For these source areas, the triggering mechanism is discussed, with an example of geotechnical validation being proposed for a well monitored mountain basin. The geotechnical modelling at site scale confirms the geological analyses at massif scale and provides further insights into the events, thus highlighting the potential of a multidisciplinary approach for the interpretation of very complex slope instability phenomena.     

Geostatistical Seismic Inversion with Direct Sequential Simulation and Co-simulation with Multi-local Distribution Functions

Stochastic sequential simulation is a common modelling technique used in Earth sciences and an integral part of iterative geostatistical seismic inversion methodologies. Traditional stochastic sequential simulation techniques based on bi-point statistics assume, for the entire study area, stationarity of the spatial continuity pattern and a single probability distribution function, as revealed by a single variogram model and inferred from the available experimental data, respectively. In this paper, the traditional direct sequential simulation algorithm is extended to handle non-stationary natural phenomena. The proposed stochastic sequential simulation algorithm can take into consideration multiple regionalized spatial continuity patterns and probability distribution functions, depending on the spatial location of the grid node to be simulated. This work shows the application and discusses the benefits of the proposed stochastic sequential simulation as part of an iterative geostatistical seismic inversion methodology in two distinct geological environments in which non-stationarity behaviour can be assessed by the simultaneous interpretation of the available well-log and seismic reflection data. The results show that the elastic models generated by the proposed stochastic sequential simulation are able to reproduce simultaneously the regional and global variogram models and target distribution functions relative to the average volume of each sub-region. When used as part of a geostatistical seismic inversion procedure, the retrieved inverse models are more geologically realistic, since they incorporate the knowledge of the subsurface geology as provided, for example, by seismic and well-log data interpretation.     

From the plutonic root to the volcanic roof of a continental magmatic arc: a review of the Neoproterozoic Araçuaí orogen,southeastern Brazil

International Journal of Earth Sciences - The Araçuaí-West Congo orogen (AWCO) is one of the various components of the Brasiliano/Pan-African orogenic network generated during the...