Possible northward extension of the Philippine Fault Zone offshore Luzon Island (Philippines)

The Philippine Fault Zone, a system of left-lateral strike-slip faults traversing the length of the Philippine Islands, is associated with the oblique convergence between the Philippine Sea Plate (PSP) and the Eurasian Plate (EP). Although it is a major deformational structure within the diffuse PSP–EP convergent boundary, some of its segments, particularly its marine extensions, are not well studied. To investigate the crustal deformation in the marine prolongation of the Philippine Fault Zone offshore Luzon Island, multi-channel seismic (MCS) data, gravity data and centroid moment tensor solutions were used in this study. Focal mechanism solutions from the Global CMT catalog were inverted to determine the average principal stress directions and consequently understand the prevailing stress regime in the study area. The stress inversion results indicate that the direction of maximum compression (σ1) is 321°N, which coincides with the PSP–EP convergence direction. From the MCS profiles, the study area was subdivided into deformation zone and a relatively stable zone. Thrust faulting, folding and general uplift are observed in the deformation zone. This zone is further subdivided into the active and inactive segments. In the active segment, uplift is occurring in the submarine ridge. This deformation pattern can be related to the ongoing uplift in some regions bisected by the PFZ. The inactive segment, characterized by intense folding of the sequences and faulting of the basement and overlying sequences, is suggested as the precursor of the Philippine Fault Zone. Deformation appears to be recently shifted to the east as delineated by an uplifted N-NW trending submarine ridge offshore NW Luzon Island.     

ESTUARINE AND COASTAL SEDIMENTATION PROBLEMS

This keynote lecture addresses engineering sedimentation problems in estuarine and coastal environments and practical solutions of these problems based on the results of field measurements, laboratory scale models and numerical models. The three most basic design rules are: (1) try to understand the physical system based on available field data; perform new field measurements if the existing field data set is not sufficient (do not reduce on the budget for field measurements); (2)try to estimate the morphological effects of engineering works based on simple methods (rules of thumb, simplified models, analogy models, i.e. comparison with similar cases elsewhere); and (3)use detailed models for fine-tuning and determination of uncertainties (sensitivity study trying to find the most influencial parameters). Engineering works should be designed in such a way that side effects (sand trapping, sand starvation, downdrift erosion) are minimum. Furthermore, engineering works should be designed and constructed or built in harmony rather than in conflict with nature. This ‘building with nature‘ approach requires a profound understanding of the sediment transport processes in morphological systems.     

Understanding Causes and Impacts of the Dinoflagellate, Cochlodinium polykrikoides, Blooms in the Chesapeake Bay

During August and September 2007, the lower Chesapeake Bay and its tributaries experienced a massive bloom of Cochlodinium polykrikoides Margalef (>10⁴ cells per milliliter) that persisted for over a month, was extremely patchy, and at times penetrated into the Atlantic Ocean. The onset of the bloom coincided with a period of intense rainfall and stormwater runoff after a protracted summer drought period. Genetic evidence showed this species to be distinct from many Asian strains but similar to other North American strains. Populations dominated by C. polykrikoides took up a variety of nitrogenous compounds to support their growth and were able to mobilize additional sources of organic nutrients through peptide hydrolysis. Bioassays determined that C. polykrikoides exerted a lethal affect on juvenile fish and shellfish, causing 100% mortality of juvenile fish (Cyprinodon variegates) in less than 24 h and 20% mortality in juvenile American oysters (~21 mm; Crassostrea virginica) within 72 h.     

Serpentine geology links to water quality and heavy metals in sediments of a stream system in central Queensland,Australia

Serpentinite soils, common throughout the world, are characterized by low calcium-to-magnesium ratios, low nutrient levels and elevated levels of heavy metals. Yet the water quality and heavy metal concentrations in sediments of streams draining serpentine geology have been little studied. The aim of this work was to collect baseline data on the water quality (for both wet and dry seasons) and metals in sediments at 11 sites on the Marlborough Creek system, which drains serpentine soils in coastal central Queensland, Australia. Water quality of the system was characterized by extremely hard waters (555–698 mg/L as CaCO₃), high dissolved salts (684–1285 mg/L), pH (8.3–9.1) and dissolved oxygen (often >110% saturation). Cationic dominance was Mg > Na > Ca > K and for anions HCO₃ > Cl > SO₄. Al, Cu and Zn in stream waters were naturally high and exceeded Australian and New Zealand Environment and Conservation Council guidelines. Conductivity displayed the highest seasonal variability, decreasing significantly after wet season flows. There was little seasonal variation in pH, which often exceeded regional guidelines. Stream sediments were enriched with concentrations of Ni, Cr, Co and Zn up to 35, 21, 10 and 2 times the world average for shallow sediments, respectively. Concentrations for Ni and Cr were up to 60 and 16 times those of the relevant Interim Sediment Quality Guidelines Low Trigger Values, respectively. The distinctive nature of the water and sediment data suggests that it would be appropriate to establish more localized water quality and sediment guidelines for the creek system for the water quality parameters conductivity, Cu and Zn (and possibly Cr and Cd also), and for sediment concentrations of Cd, Cr and Ni.     

Fluid geochemistry of the Mondragone hydrothermal systems (southern Italy): water and gas compositions vs. geostructural setting

International Journal of Earth Sciences - The geochemistry of natural thermal fluids discharging in the Mondragone Plain has been investigated. Thermal spring emergences are located along the...     

Competitive Adjustment and Advancement in Global Commodity Chains: I. Firm Strategies and Trajectories in the East Asian Apparel Industry

Globalisation discourses increasingly depart from a network‐centred view of the world, and focus on the possibilities of leveraging economic globalisation – through incorporation in international production networks and global commodity chains (GCCs)– as a strategy for less developed countries (LDCs) to industrialise and advance their position in the world economy. This article goes beyond the question of incorporation and addresses the issue of sustaining positions, upgrading to more rewarding roles, and advancing to less dependent positions within production networks and GCCs. Drawing on experiences in the East Asian apparel industry, we present a framework for analysing such processes at both the firm and industry levels. We demonstrate that the East Asian experience provides a rather positive picture, despite a decline in the region's share of world trade. The present paper is a preliminary contribution; further research, using the framework presented, would enhance insights into competitive adjustment and advancement in GCCs, specifically, the forces underlying success or failure.     

Geochemistry, strontium isotope data, and potassium-argon ages of the andesite-rhyolite association in the Padang area, West Sumatra

Quaternary volcanoes in the Padang area on the west coast of Sumatra have produced two-pyroxene, calc-alkaline andesite and volumetrically subordinate rhyolitic and andesitic ash-flow tuffs. A sequence of andesite (pre-caldera), rhyolitic tuff and andesitic tuff, in decreasing order of age, is related to Maninjau caldera. Andesite compositions range from 55.0 to 61.2% SiO₂ and from 1.13 to 2.05% K₂O. Six K-Ar whole-rock age determinations on andesites show a range of 0.27 ± 0.12 to 0.83 ± 0.42 m.y.; a single determination on the rhyolitic ashflow tuff gave 0.28 ± 0.12 m.y.Eight ⁵⁷Sr/²⁶Sr ratios on andesites and rhyolite tuff west of the Semangko fault zone are in the range 0.7056 – 0.7066. These ratios are higher than those elsewhere in the Sunda arc but are comparable to the Taupo volcanic zone of New Zealand and calc-alkaline volcanics of continental margins. An ⁸⁷Sr/⁸⁶Sr ratio of 0.7048 on G. Sirabungan east of the Semangko fault is similar to an earlier determination on nearby G. Marapi (0.7047), and agrees with ⁸⁷Sr/⁸⁶Sr ratios in the rest of the Sunda arc. The reason for this distribution of ⁸⁷Sr/⁸⁶Sr ratios is unknown.The high ⁸⁷Sr/⁸⁶Sr ratios are tentatively regarded to reflect a crustal source for the andesites, while moderately fractionated REE patterns with pronounced negative Eu anomalies suggest a residue enriched in plagioclase with hornblende and/or pyroxenes. Generation of associated andesite and rhyolite could have been caused by hydrous fractional melting of andesite or volcanogenic sediments under adiabatic decompression.     

Isotopic anomalies in meteorites and their origins—V. Search for fission fragment recoils in Allende sulfides

Three troilite- and pentlandite-rich samples from the Allende C3 chondrite were analyzed for Xe (and in one case Ne and Ar) by mass spectrometry, in 13–22 temperature steps. All samples released a small ‘CCFXe’ component (enriched in the heavy isotopes Xe^{134, 136}) at the relatively low temperature of 700–800°C, ahead of adsorbed atmospheric Xe (~900°C), radiogenic Xe¹²⁹ (1000°C), and primordial Xe (1250°C). Though such a labile component suggests implanted fission recoils, the simultaneous release of Ne, Ar, and Xe^{124, 126} shows that it instead comes from carbon and perhaps chromite, two major host phases of CCFXe. Apparently small amounts of these phases are occluded in sulfides, and decompose by chemical reaction upon heating. Thus the experiment fails to resolve the nature of CCFXe.A marked enrichment of Xe¹²⁴, without corresponding enrichments in Xe¹²⁶ or Xe^131–136, was observed in the 550–650° and 1400–1500° fractions. Though requiring confirmation, it supports earlier evidence for the complexity and variability of the light xenon component, contrary to claims that it is an integral part of CCFXe.