The heating history of Vesta and the onset of differentiation

In this work, we study the link between the evolution of the internal structure of Vesta and thermal heating due to ²⁶Al and ⁶⁰Fe and long‐lived radionuclides, taking into account the chemical differentiation of the body and the affinity of ²⁶Al with silicates. We explored several thermal and structural scenarios differing in the available strength of energy due to the radiogenic heating and in the postsintering macroporosity. By comparing them with the data supplied by the HEDs and the Dawn NASA mission, we use our results to constrain the accretion and differentiation time as well as the physical properties of the core. Differentiation takes place in all scenarios in which Vesta completes its accretion in <1.4 Ma after the injection of ²⁶Al into the solar nebula. In all those scenarios where Vesta completes its formation in <1 Ma from the injection of ²⁶Al, the degree of silicate melting reaches 100 vol% throughout the whole asteroid. If Vesta completed its formation between 1 and 1.4 Ma after ²⁶Al injection, the degree of silicate melting exceeds 50 vol% over the whole asteroid, but reaches 100 vol% only in the hottest, outermost part of the mantle in all scenarios where the porosity is lower than 5 vol%. If the formation of Vesta occurred later than 1.5 Ma after the injection of ²⁶Al, the degree of silicate melting is always lower than 50 vol% and is limited only to a small region of the asteroid. The radiation at the surface dominates the evolution of the crust, which ranges in thickness from 8 to about 30 km after 5 Ma: a layer about 3–20 km thick is composed of primitive unmelted chondritic material, while a layer of about 5–10 km is eucritic.     

Integrated assessment on sea water quality based on the fuzzy neural network

根据俚岛镇海湾22个海洋观测点的水质监测数据,依据人工神经网络与模糊理论,建立模糊神经网络模型,对研究区海水水质进行了综合评价.结果表明,区域内40.91％的采样点属于Ⅰ类海水水质标准,其余为Ⅱ类海水水质.其中,水质Ⅱ类区位于临络湾与俚岛湾的半封闭海域,因该区造船业对水体造成污染且海水对流强度较弱,不利于污染物的扩散;而海水水质Ⅰ类区域靠近黄海,工业活动较少,水体对流较强,利于污染物扩散.     

The GEM project: An international collaboration to survey galactic radiation emission

The GEM (Galactic Emission Mapping) project is an international collaboration established with the aim of surveying the full sky at long wavelengths with a multi-frequency radio telescope. A total of 745 hours of observation at 408 MHz were completed from an Equatorial site in Colombia. The observations cover the celestial band 0 ^h <<24 ^h , and –24° 22<<+35° 37. Preliminary results of this partial survey will be discussed. A review of the instrumental setup and a 10° resolution sky map at 408 MHz is presented.Presented by S. Torres at the UN/ESA Workshop on Basic Space Sciences: From Small Telescopes to Space Missions, Colombo, Sri Lanka 11–14 January 1996     

The project “spice”

Proposed to both the French and the European Space Agency as one possible small mission, SPICE is a project for a dedicated small satellite for a near-IR spectroscopic all-sky survey. The instrument would cover the spectral range 1.8 - 3.6µm, possibly extended to 1.8 - 7µm, at a resolution of 100, with pixels of 1 arc-min. The excellent sensitivity (0.02 MJy sr-1) results from: i) the quasi-zero level of background due to the efficient passive cooling of the whole experiment; ii) the use of large format arrays; iii) the non-stop observing mode (drift-scanning). The spectral domain, complementing the one of ISO, partially opaque from the ground, is specially rich in spectral features tracing stars and all components of the Interstellar Medium (molecular, atomic and ionized gas, dust). With a cooling below 80 K of the focal instrument, then it becomes possible to consider doubling the spectral domain and to cover the whole 1.8 - 7µm range.     

Crustal impurities and the internal temperature of a neutron star crust

When the upper part of a neutron star crystallizes to form the crust, the constituting ions are trapped in the lattice as a result of the low diffusion rates in the solid phase. As a consequence, the local composition of the crust corresponds to the equilibrium condition at the melting point and not at the present internal temperature. The inclusion of the small entropic contribution to the free energy does not lead to marked changes in our view of the microscopic structure of a neutron star crust, because the melting temperature is much smaller than the typical energies at play in the crystal cell. However, mixing between layers characterized by different nuclear species is found to be an important effect for the production of impurities. We show that one should expect an increase of the thermal diffusion time through the crust at small temperatures, because of the decrease of thermal conductivity in relatively thin impurity-rich layers acting as isolating shields.     

New Approach to Study Extended Evolution of Supergranular Flows and Their Advection of Magnetic Elements

Using velocity and magnetogram data extracted from the full-disk field of view of MDI during the 1999 Dynamics Program, we have studied the dynamics of small-scale magnetic elements (3–7 Mm in size) over time periods as long as six days while they are readily visible on the solar disk. By exploiting concurrent time series of magnetograms and Doppler images, we have compared the motion of magnetic flux elements with the supergranular velocity field inferred from the correlation tracking of mesogranular motions. Using this new method (which combines the results from correlation tracking of mesogranules with detailed analysis of simultaneous magnetograms), it is now possible to correlate the motions of the velocity field and magnetic flux for long periods of time and at high temporal resolution. This technique can be utilized to examine the long-term evolution of supergranulation and associated magnetic fields, for it can be applied to data that span far longer time durations than has been possible previously. As tests of its efficacy, we are able to use this method to verify many results of earlier investigations. We confirm that magnetic elements travel at approximately 350 m s ^–1 throughout the duration of their lifetime as they are transported by supergranular outflows. We also find that the positions of the magnetic flux elements coincide with the supergranular network boundaries and adjust as the supergranular network itself evolves over the six days of this data set. Thus we conclude that this new method permits us to study the extended evolution of the supergranular flow field and its advection of magnetic elements. Since small-scale magnetic elements are strongly advected by turbulent convection, their dynamics can give important insight into the properties of the subsurface convection.     

The southern cape conductive belt (South Africa): Its composition, origin and tectonic significance

Magnetometer array studies have led to the discovery and mapping of the Southern Cape Conductive Belt (SCCB) crossing the southern tip of Africa from west to southeast coasts. The SCCB lies just south of the Namaqua-Natal Belt of cratonic rocks remobilized about 1000 m.y. B.P. It is shown that it coincides with a zone of weakness which has been exploited by three major geosynclinal accumulations over some 600 m.y. Relationships between the SCCB and the basement geochronology, geology and tectonics are considered in detail. These relationships support the view that the conductive belt was formed by an accumulation of marine sediments and oceanic lithosphere at the top of a Proterozoic subduction which stopped about 1000 to 800 m.y. B.P. Associated with this subduction we propose a Proterozoic range of Andean mountains, whose roots are now exposed in the Namaqua-Natal Belt. Later subduction further south, near the present south coast, is proposed to account for the intrusion, between the south coast and the SCCB, of the Cape Granites in the time interval 600-500 m.y. B.P. There is some evidence for a third, yet more distant, subduction episode off Permian Gondwanaland. After outlining this tectonic history, the paper turns to a closer examination of the hypothesis that the Southern Cape Conductive Belt consists of partly serpentinized basalt accumulated at the top of a Proterozoic subduction. A large static magnetic anomaly, which correlates with the SCCB over most of its length, is well fitted by a model which strongly supports this hypothesis. Bouguer gravity anomalies along western and central profiles likewise support the hypothesis. A discussion follows of the process of formation of the proposed block of serpentinized marine rocks, beginning with serpentinization of the crust near oceanic ridges by reaction of warm, porous, newly-extruded basalt with seawater convecting through it. The serpentinized basalt is stable at crustal temperatures and pressures and so is transported in the seafloor until it reaches a subduction, where it accumulates because of its low density. Examples of such accumulations are cited. Finally, it is shown that any iron in the olivine and pyroxene in the original basalt precipitates, when these silicates are hydrated to serpentine, as magnetite which is the dominant mineral conferring high electrical conductivity and high magnetic susceptibility on serpentinites. In particular the Beattie static magnetic anomaly requires, in our model calculation, a very high susceptibility readily attainable in basalt at 15–20% serpentinization. The authors know of no other rock able to provide this high susceptibility. A similar percentage of serpentinization provides the density required to model the gravity anomalies.     

Experiments on the effect of inflow and outflow sequences on suspended sediment exchange rates

In laboratory experiments, the influence of inflow and outflow sequences on the behavior of fine sedi-ment was investigated. The experimental set-up consisted of two interconnected rectangular basins, between which water was moved back and forth. Suspended sediment concentration in the main basin as well as the sediment exchange rates were derived from turbidity measurements.The suspended sediment ratio, SSR, and sediment exchange rates (influx sediment rate, ISR, and evacuated sediment rate, ESR) were measured. In twenty test runs, a parametric study on the magnitude and frequency of inflow and outflow cycles, the relative duration between inflow and outflow sequences, the initial sediment concentration, and the intake position was done. An initial test with stagnant water described the set-tling behavior of fine sediment and served as a reference scenario.The test results show that settling of fine particles near the intake/outlet structure can be considerably reduced by the nature of the inflow and outflow sequences. High cycle magnitude and frequency lead to maximum suspended sediment ratio in the system. For low discharges, the evolution of suspended sediment concentration cannot be directly correlated to the inflow and outflow cycles. However, compared to"no operation"conditions, the suspended sediment ratio could be increased by 10%to 40%locally. For high discharge, the evolution of suspended sediment concentration correlated with discharge cycles and suspended sediment ratios between 50%and 80%higher than for stagnant water could be achieved. Similar ratios could be obtained when the intake is located closer to the bottom or to the free water surface.Meanwhile, the overall sediment balance remained in equilibrium over the test period, indicating that the influx and evacuated sediment rates are not significantly influenced by the inflow and outflow cycles.