Sedimentology,mineralogy, and geochemistry of the Late Quaternary Meyghan Playa sediments,NE Arak,Iran: palaeoclimate implications

Playas are shallow ephemeral lakes that form in arid and semi-arid regions. Iran has a large number of playas such as Meyghan Playa, which is located in the northeast of Arak city that borders the central Iran and Sanandaj-Sirjan zones. This study aims to investigate the mineralogical, sedimentological, and geochemical characteristics of the playa sediments. In order to determine the palaeoenvironment, we carried out X-ray diffraction (XRD), X-ray fluorescence (XRF), and scanning electron microscopy (SEM) studies. Meyghan Playa sediments consist of very fine-grained sediments and contain both evaporite and clastic minerals. The evaporite minerals include calcite, gypsum, halite, glauberite, and thenardite, whereas clastic minerals are quartz and clay. The calcite abundance decreases from the margin to the central portion of the playa but gypsum and halite abundances show an increasing trend from the margin to the center. This observation is consistent with the general zonation of other playas. Variations of calcite and gypsum concentration profiles present increasing and decreasing trends with depth, which could be ascribed to the changes in climatic factors. These factors include brine chemical modifications owing to changes in evaporation and precipitation rates and variations in relative abundance of anions-cations or in the rate of clastic and evaporite minerals due to variations in the freshwater influx (climatic changes) with time. A decrease in calcite and increase in sulfate minerals (especially gypsum) with depth is probably due to the higher water level and rainfall, a more humid climate, and salinity variations.     

Flume tests on fluvial erosion mechanisms in till‐bed channels

Semi‐alluvial stream channels eroded into till and other glacial sediments are common in areas of extensive glacial deposition such as the Great Lakes region and northern interior plains of North America. The mechanics of erosion and erosional weakness of till results in the dominance of fluvial scour and mass erosion due to spontaneous fracture at planes of weakness under shearing flow. There have been few controlled tests looking at erosional mechanisms and resistance of till in river channels. We subjected small blocks of till to unidirectional flows in a laboratory flume to measure the threshold shear stress for erosion and observed the erosion mechanics. Critical shear stress for erosion varied from 7 to 8 Pa for samples with initial saturated moisture content in which a combination of fluvial scour and mass cracking/block erosion dominated. When dried, micro‐fissures occurred in the sample and erosional resistance of the till was extremely low at <1 Pa with erosion appearing to be by fluvial scour. When mobile gravel was added to the test conditions, the gravel reduced the erosion threshold slightly because of the enhanced scour around and below the gravel particles and the tendency for the gravel to aid in crack enlargement. Thus a partial or thin gravel cover over the till may provide no protection from erosion. The erosion processes and effects reflect the complex and contingent mechanics and properties of till, and suggest that the erosion characteristics of till bed semi‐alluvial channels differ from abrasion or plucking dominated processes in more resistant bedrock. Copyright © 2017 John Wiley & Sons, Ltd.     

Pattern recognition of seismogenic nodes using Kohonen selforganizing map: example in west and south west of Alborz region

Pattern recognition of seismic and morphostructural nodes plays an important role in seismic hazard assessment. This is a known fact in seismology that tectonic nodes are prone areas to large earthquake and have this potential. They are identified by morphostructural analysis. In this study, the Alborz region has considered as studied case and locations of future events are forecast based on Kohonen Self-Organized Neural Network. It has been shown how it can predict the location of earthquake, and identifies seismogenic nodes which are prone to earthquake of M5.5+ at the West of Alborz in Iran by using International Institute Earthquake Engineering and Seismology earthquake catalogs data. First, the main faults and tectonic lineaments have been identified based on MZ (land zoning method) method. After that, by using pattern recognition, we generalized past recorded events to future in order to show the region of probable future earthquakes. In other word, hazardous nodes have determined among all nodes by new catalog generated Self-organizing feature maps (SOFM). Our input data are extracted from catalog, consists longitude and latitude of past event between 1980-2015 with magnitude larger or equal to 4.5. It has concluded node D1 is candidate for big earthquakes in comparison with other nodes and other nodes are in lower levels of this potential.     

Integration of cadastral survey data into building information models

Cadastral surveying plays an important role in defining legal boundaries of land and property. The current practice for recording cadastral survey data mainly relies on 2D digital or analog documents. This practice is efficient for simple land parcels but can be challenged in complex building developments. To address the issues stemmed from 2D methods of representing cadastral survey data, 3D spatial information models can be considered as a viable solution for managing cadastral survey data. Building Information Modeling (BIM) enables colsslaborative 3D management of the design, construction, and operation of buildings. There have been extensive studies conducted to investigate the connectivity between BIM and 3D cadaster. Most of these studies focus on managing legal information, such as ownership boundaries and attributes, in BIM-based environments. However, there is limited investigation on how survey- ing measurements can be mapped into BIM. In this study, the proposed method for integrating the cadastral survey data into the BIM environment includes identifying cadastral survey requirements, using BIM entities relevant to cadastral survey data, enrichment of a BIM proto- type, and evaluation of the prototype. The major contribution of this study is to demonstrate the storage of cadastral survey data such as survey marks and traverse lines in the BIM environment. Therefore, this research contributes to the further enrichment of BIM with incorporating data elements related to cadastral surveying practices. It is confirmed that current BIM-based tools provide restricted capabilities for explicit management and visualiza- tion of cadastral survey data. This limitation can be addressed in the future enhancements of BIM in terms of supporting important elements for cadastral survey data.     

IPCC global coupled model simulations of the South America monsoon system

This study examines the variability of the South America monsoon system (SAMS) over tropical South America (SA). The onset, end, and total rainfall during the summer monsoon are investigated using precipitation pentad estimates from the global precipitation climatology project (GPCP) 1979–2006. Likewise, the variability of SAMS characteristics is examined in ten Intergovernmental Panel on Climate Change (IPCC) global coupled climate models in the twentieth century (1981–2000) and in a future scenario of global change (A1B) (2081–2100). It is shown that most IPCC models misrepresent the inter-tropical convergence zone and therefore do not capture the actual annual cycle of precipitation over the Amazon and northwest SA. Most models can correctly represent the spatiotemporal variability of the annual cycle of precipitation in central and eastern Brazil such as the correct phase of dry and wet seasons, onset dates, duration of rainy season and total accumulated precipitation during the summer monsoon for the twentieth century runs. Nevertheless, poor representation of the total monsoonal precipitation over the Amazon and northeast Brazil is observed in a large majority of the models. Overall, MIROC3.2-hires, MIROC3.2-medres and MRI-CGCM3.2.3 show the most realistic representation of SAMS’s characteristics such as onset, duration, total monsoonal precipitation, and its interannual variability. On the other hand, ECHAM5, GFDL-CM2.0 and GFDL-CM2.1 have the least realistic representation of the same characteristics. For the A1B scenario the most coherent feature observed in the IPCC models is a reduction in precipitation over central-eastern Brazil during the summer monsoon, comparatively with the present climate. The IPCC models do not indicate statistically significant changes in SAMS onset and demise dates for the same scenario.     

Multiscale analysis of noisy 3D GPR data using the directional continuous wavelet transform

Here, we present a new technique of noise effect attenuation in the 3D ground-penetrating radar (GPR) data analysis using the 2D directional continuous wavelet transform (DCWT). The proposed technique is based on the application of a Gaussian low pass filter to the modulus of the 2D DCWT for low scales. After application of the low pass filter, maxima of the CWT are mapped for all range of scales. Application to a noisy GPR data shows that the proposed idea can improve GPR data analysis by the continuous wavelet transform.     

Comprehensive laboratory study on stress–strain of granular soils at constant global void ratio: combined effects of fabrics and silt content

The published literature has revealed conflicting results regarding the effect of low plastic fines fraction (I_p?≤?5.0%) on the mechanical behavior of sandy soils. For this reason, the use of different sample initial structures as (initial relative density approach, global void ratio index approach, etc.) could explain these different mechanical responses of granular materials. Thus, it is necessary to evaluate the quantitative aspect of the low plastic fines effects on the undrained monotonic response of sand-silt mixtures using the global void ratio approach. To achieve this goal, an experimental testing program through controlled monotonic triaxial tests was carried out on reconstituted saturated Chlef sand containing from 0 to 50% silt with an interval of 10% at three global void ratios (e?=?0.64, 0.66 and 0.68) and subjected to constant confining pressure (σ'₃?=?100 kPa). The different samples were reconstituted using two different preparation techniques: DFP and MT. The obtained results show that the low plastic fines content appears as a very relevant parameter in the characterization of the mechanical response of sand-silt mixture samples reconstituted at constant global void ratios, where the steady state shear strength and instability shear strength decreased with the increase in low plastic fines content up to the limiting fines contents (F_c?=?40% and F_c?=?10%) considering both studied initial structures (Dry funnel pluviation and Moist tamping), respectively. Beyond these thresholds fines contents, a reverse trend was observed for all parameters under study. Moreover, the test results indicate that the brittleness index, flow potential (V_f), friction index, equivalent void ratio (e*) and equivalent relative density (Dr*) could be considered as reliable parameters in the prediction of the mechanical behavior of the silty sand soils under study.

     

Fluoride pollution in soils and waters of Koohbanan region, southeastern Iran

Dental fluorosis occurs because of fluoride over-absorption during tooth calcification and maturation. We studied fluoride concentration in water and soil samples of the Koohbanan region in Kerman province of southeastern Iran and the effects of calcium chloride and gypsum treatments in decreasing the amount of fluoride in water samples of this region. The results indicate that the high amount of fluoride in the water samples of Koohbanan region is not in agreement with the recommended amount of fluoride concentration for drinking water by World Health Organization (that is 1–1/5 mg/l). Applying calcium chloride and gypsum treatments decreased the amount of fluoride in the water samples showing that utilizing calcium chloride (6 mg/l) or gypsum (12 mg/l) can lower the fluoride concentration in the water samples of Koohbanan, and thus solve the observed dental fluorosis problem.     

A wavelet-based multifractal analysis of seismic data for facies identification. Application on the pilot KTB borehole

The main goal of this paper is to identify reflection from seismic data using the multifractal formalism. Firstly, the wavelet transform modulus maxima lines method is applied with a sliding window of 128 samples at the seismic seismogram data. After that, we estimate the generalized fractal dimension. Application at the noisy synthetic seismic seismogram of the pilot Kontinentales Tiefbohrprogramm de Bundesreplik Deutschland borehole shows that the three fractal dimensions related to the three first moments are a good tool that can separate between reflection dues to the change of facies and random noise.