Extreme behavior in a triple friction pendulum isolated frame

While isolation can provide significantly enhanced performance compared to fixed‐base counter parts in design level or even maximum considered level earthquakes, there is still uncertainty over the performance of isolation systems in extreme events. Researchers have looked at component level stability of rubber bearings and on the effect of moat impact on behavior of structures isolated on general bilinear isolators. However, testing of triple friction pendulum (TFP) sliding bearings has not been done dynamically or incorporated into a building system. Here, one‐third scale laboratory tests were conducted to on a 2‐story 2‐bay TFP‐isolated structure. Input motions were increasingly scaled until failure occurred at the isolation level. As the superstructure was designed with a yield force equivalent to the force of the bearing just at their ultimate displacement capacity, there was minimal yielding. A numerical model is presented to simulate the isolated building up to and including bearing failure. Forces transferred to the superstructure in extreme motions are examined using both experimental and numerical data. Additionally, the effect of the hardening stage of the TFP bearing is evaluated using the numerical model, finding slight benefits.     

GPCC's new land surface precipitation climatology based on quality-controlled in situ data and its role in quantifying the global water cycle

In 1989, the need for reliable gridded land surface precipitation data sets, in view of the large uncertainties in the assessment of the global energy and water cycle, has led to the establishment of the Global Precipitation Climatology Centre (GPCC) at Deutscher Wetterdienst on invitation of the WMO. The GPCC has calculated a precipitation climatology for the global land areas for the target period 1951–2000 by objective analysis of climatological normals of about 67,200 rain gauge stations from its data base. GPCC's new precipitation climatology is compared to several other station-based precipitation climatologies as well as to precipitation climatologies derived from the GPCP V2.2 data set and from ECMWF's model reanalyses ERA-40 and ERA-Interim. Finally, how GPCC's best estimate for terrestrial mean precipitation derived from the precipitation climatology of 786 mm per year (equivalent to a water transport of 117,000 km³) is fitting into the global water cycle context is discussed.     

A Tailored Computation of the Mean Dynamic Topography for a Consistent Integration into Ocean Circulation Models

Geostrophic surface velocities can be derived from the gradients of the mean dynamic topography—the difference between the mean sea surface and the geoid. Therefore, independently observed mean dynamic topography data are valuable input parameters and constraints for ocean circulation models. For a successful fit to observational dynamic topography data, not only the mean dynamic topography on the particular ocean model grid is required, but also information about its inverse covariance matrix. The calculation of the mean dynamic topography from satellite-based gravity field models and altimetric sea surface height measurements, however, is not straightforward. For this purpose, we previously developed an integrated approach to combining these two different observation groups in a consistent way without using the common filter approaches (Becker et al. in J Geodyn 59(60):99–110, 2012; Becker in Konsistente Kombination von Schwerefeld, Altimetrie und hydrographischen Daten zur Modellierung der dynamischen Ozeantopographie 2012). Within this combination method, the full spectral range of the observations is considered. Further, it allows the direct determination of the normal equations (i.e., the inverse of the error covariance matrix) of the mean dynamic topography on arbitrary grids, which is one of the requirements for ocean data assimilation. In this paper, we report progress through selection and improved processing of altimetric data sets. We focus on the preprocessing steps of along-track altimetry data from Jason-1 and Envisat to obtain a mean sea surface profile. During this procedure, a rigorous variance propagation is accomplished, so that, for the first time, the full covariance matrix of the mean sea surface is available. The combination of the mean profile and a combined GRACE/GOCE gravity field model yields a mean dynamic topography model for the North Atlantic Ocean that is characterized by a defined set of assumptions. We show that including the geodetically derived mean dynamic topography with the full error structure in a 3D stationary inverse ocean model improves modeled oceanographic features over previous estimates.     

Evaluating the sensitivity of wetlands to climate change with remote sensing techniques

Wetlands are valuable ecosystems that provide many valuable services, yet many of these important ecosystems are at risk because of current trends in climate change. The Prairie Pothole Region (PPR) in the upper‐midwest of the United States and south‐central Canada, characterized by glacially sculpted landscapes and abundant wetlands, is one such vulnerable region. According to regional/global climate model predictions, drought occurrence will increase in the PPR region through the 21st century and thus will probably cause the amount of water in wetlands to decline. Water surface area (WSA) of Kidder County, ND, from 1984–2011 was measured by classifying TM/ETM+(Landsat Thematic Mapper / Enhanced Thematic Mapper Plus) images through the modified normalized difference water index. We then developed a linear model based on the WSA of these wetlands and historical climate data and used this to determine the wetland sensitivity to climate change and predict future wetlands WSA in the PPR. Our model based on Palmer drought severity index (PDSI) of the current year (PDSI_{t ? 0}) and of the previous two years (PDSI_{t ? 2}) can explain 79% of the annual wetland WSA variance, suggesting a high sensitivity of wetlands to drought/climate change. We also predicted the PPR wetlands WSA in the 21st century under A1B scenario (a mid‐carbon emission scenario) using simulated PDSI based on Intergovernmental Panel on Climate Change AR4 22‐model ensemble climate. According to our prediction, the WSA of the PPR wetlands will decrease to less than half of the baseline WSA (defined as the mean wetlands WSA of the 2000s) by the mid of the 21st century, and to less than one‐third by the 2080s, and will then slightly increase in the 2090s. This considerable future wetland loss caused only by climate change provides important implication to future wetland management and climate adaptation policy. Copyright © 2012 John Wiley & Sons, Ltd.     

Transfer functions simulating the coprecipitation of trace elements in unsaturated soils

Transfer functions describing the coprecipitation of various trace elements (TE; As, Cd, Co, Cu, Cr, Mo, Ni, Pb, Zn), precipitating with iron(oxihydr)oxides from an aqueous solution, were developed and implemented in the computer model ‘Seeper’. ‘Seeper’ was developed to predict the progression of the concentrations of inorganic pollutants in unsaturated soils underneath contaminated areas and to evaluate the prospective contamination of the groundwater. Transfer functions provide a straight and simple relation between the coprecipitation of TE and easy to obtain standard soil parameters, without excessive repercussions on the usability and computation time of the model. Laboratory experiments were conducted to quantify coprecipitation in solutions with pH values ranging from 5 to 12 and containing various iron and TE concentrations. For the examined TE, the transfer functions describe the coprecipitated fraction as a function of the pH value and the concentration ratio between precipitated iron and a TE. The transfer functions yielded a good prediction of cadmium, cobalt, copper, molybdenum, nickel, and zinc (R ² from 0.73 to 0.83). As for arsenic, chromium, and lead the correlation was not as good albeit a significant influence of precipitating iron on the mobility of these elements was observed and represented in the corresponding transfer functions.     

Reproductive characteristics and steroid levels in the scleractinian coral Oculina patagonica inhabiting contaminated sites along the Israeli Mediterranean coast

In this study we compared reproductive characteristics and steroid hormone levels in the non-indigenous scleractinian coral, Oculina patagonica, inhabiting contaminated vs. uncontaminated reference sites along the Israeli Mediterranean coast. Our results indicate significantly higher steroid levels in both seawater and coral tissue samples from contaminated sites as compared to reference sites, suggesting that corals tend to accumulate steroids from the surrounding waters. Despite their higher steroid levels, corals from the contaminated sites showed reproductive potential comparable to those of the reference sites. Interestingly, a clear distinction could be seen between corals exposed to pollution for long vs. short durations, with the latter showing a failure to complete gametogenesis. This suggests that reproduction in O. patagonica is susceptible to acute rather than chronic stress. The involvement of adjustment/adaptation processes may explain this species tolerance, and may reflect the ability of O. patagonica to successfully invade new areas in the Mediterranean Sea.     

Interpolation using a generalized Green's function for a spherical surface spline in tension

A variety of methods exist for interpolating Cartesian or spherical surface data onto an equidistant lattice in a procedure known as gridding. Methods based on Green's functions are particularly simple to implement. In such methods, the Green's function for the gridding operator is determined and the resulting gridding solution is composed of the superposition of contributions from each data constraint, weighted by the Green's function evaluated for all output–input point separations. The Green's function method allows for considerable flexibility, such as complete freedom in specifying where the solution will be evaluated (it does not have to be on a lattice) and the ability to include both surface heights and surface gradients as data constraints. Green's function solutions for Cartesian data in 1-, 2- and 3-D spaces are well known, as is the dilogarithm solution for minimum curvature spline on a spherical surface. Here, the spherical surface case is extended to include tension and the new generalized Green's function is derived. It is shown that the new function reduces to the dilogarithm solution in the limit of zero tension. Properties of the new function are examined and the new gridding method is implemented in Matlab® and demonstrated on three geophysical data sets.     

Environmental Radioxenon Levels in Europe: a Comprehensive Overview

Activity concentration data from ambient radioxenon measurements in ground level air, which were carried out in Europe in the framework of the International Noble Gas Experiment (INGE) in support of the development and build-up of a radioxenon monitoring network for the Comprehensive Nuclear-Test-Ban Treaty verification regime are presented and discussed. Six measurement stations provided data from 5 years of measurements performed between 2003 and 2008: Longyearbyen (Spitsbergen, Norway), Stockholm (Sweden), Dubna (Russian Federation), Schauinsland Mountain (Germany), Bruyères-le-Châtel and Marseille (both France). The noble gas systems used within the INGE are designed to continuously measure low concentrations of the four radioxenon isotopes which are most relevant for detection of nuclear explosions: ^131mXe, ^133mXe, ¹³³Xe and ¹³⁵Xe with a time resolution less than or equal to 24 h and a minimum detectable concentration of ¹³³Xe less than 1 mBq/m³. This European cluster of six stations is particularly interesting because it is highly influenced by a high density of nuclear power reactors and some radiopharmaceutical production facilities. The activity concentrations at the European INGE stations are studied to characterise the influence of civilian releases, to be able to distinguish them from possible nuclear explosions. It was found that the mean activity concentration of the most frequently detected isotope, ¹³³Xe, was 5–20 mBq/m³ within Central Europe where most nuclear installations are situated (Bruyères-le-Châtel and Schauinsland), 1.4–2.4 mBq/m³ just outside that region (Stockholm, Dubna and Marseille) and 0.2 mBq/m³ in the remote polar station of Spitsbergen. No seasonal trends could be observed from the data. Two interesting events have been examined and their source regions have been identified using atmospheric backtracking methods that deploy Lagrangian particle dispersion modelling and inversion techniques. The results are consistent with known releases of a radiopharmaceutical facility.     

Review of self-potential methods in hydrogeophysics

The self-potential (SP) method is a passive geophysical method based on the natural occurrence of electrical fields on the Earth's surface. Combined with other geophysical methods, SP surveys are especially useful for localizing and quantifying groundwater flows and pollutant plume spreading, and estimating pertinent hydraulic properties of aquifers (water table, hydraulic conductivity). Laboratory experiments have shown that the involved coupling coefficients mainly depend on the fluid chemistry, conductivity and pH, and on the soil or rock properties. The interpretation of SP observations can be done qualitatively, for instance, by correlation of SP gradients with water fluxes (through electrokinetics) or salt fluxes (through electro-diffusion). In recent years, the interpretation has been improved with the help of modelling or/and inversion of the Poisson equation and endeavours to estimate hydraulic parameters by means of the intensity of electric current sources caused by underground flows.     

Full‐scale shaking table test of a base‐isolated medical facility subjected to vertical motions

Base isolation is a well known technology that has been proven to reduce structural response to horizontal ground accelerations. However, vertical response still remains a topic of concern for base‐isolated buildings, perhaps more so than in fixed‐base buildings as isolation is often used when high performance is required. To investigate the effects of vertical response on building contents and nonstructural components, a series of full‐scale shaking table tests were conducted at the E‐Defense facility in Japan. A four‐story base‐isolated reinforced concrete building was outfitted as a medical facility with a wide variety of contents, and the behavior of the contents was observed. The rubber base isolation system was found to significantly amplify vertical accelerations in some cases. However, the damage caused by the vertical ground motions was not detrimental when peak vertical floor accelerations remained below 2 g with three exceptions: (1) small items placed on shelves slid or toppled; (2) objects jumped when placed on nonrigid furniture, which tended to increase the response; and (3) equipment with vertical eccentricities rocked and jumped. In these tests, all equipment and nonstructural components remained functional after shaking. Copyright © 2013 John Wiley & Sons, Ltd.