Some additional results on vibrating, simply supported rectangular plates with free, rectangular cut-outs

The present study deals with numerical experiments performed using the doublesine Fourier expansion and the Ritz method to determine natural frequencies of vibration of simply supported rectangular plates with free rectangular holes parallel to the plate sides.The problem is of basic structural interest in naval and ocean engineering systems since holes are frequently practiced in plate-type structural elements to allow for the passage of ducts, elevators, etc…     

A low-cost fiber-optic system for monitoring the state of structural health of a mechanical cable

Methods for evaluating the structural health of mechanical cables and detecting their imminent failure could prevent the loss of valuable equipment and, more importantly, the possible loss of human life.The non-destructive test methods available are: thorough visual examination and measurement of the external diameter; X-rays; (induced) wave propagation; acoustic emission; magnetostrictive sensors; infrared detection.A new method which employs a commercial optical fiber for detecting the breakage of individual wires in a rope is proposed in the present paper.     

Natural frequencies of a vibrating repaired panel in an ocean structure

The present work arose from the need of repairing steel plates badly damaged by corrosion in a portion of the structural element of the naval vehicle. The possibility of removing the portion and replacing it by a patch of a composite material was considered. Its dynamic behavior is altered by the introduction of the patch and the prediction of its new behavior is of great interest in many situations. This condition would appear in other real-life situations like as a localized orthotropic effect caused in the panel by a welding procedure or a metallurgical process. The first four natural frequency coefficients of the composite repaired panel with different types of boundary conditions are determined by means of a variational approach. The displacement function is approximated making use of complete sets of beam functions. The eigenvalues have been computed from (225×225) secular determinants. An independent solution is obtained using the finite element method and a reasonably good agreement with the analytical solution is encountered.     

The morphology and tectonics of the Mark area from Sea Beam and Sea MARC I observations (Mid-Atlantic Ridge 23° N)

High-resolution Sea Beam bathymetry and Sea MARC I side scan sonar data have been obtained in the MARK area, a 100-km-long portion of the Mid-Atlantic Ridge rift valley south of the Kane Fracture Zone. These data reveal a surprisingly complex rift valley structure that is composed of two distinct spreading cells which overlap to create a small, zero-offset transform or discordant zone. The northern spreading cell consists of a magmatically robust, active ridge segment 40–50 km in length that extends from the eastern Kane ridge-transform intersection south to about 23°12′ N. The rift valley in this area is dominated by a large constructional volcanic ridge that creates 200–500 m of relief and is associated with high-temperature hydrothermal activity. The southern spreading cell is characterized by a NNE-trending band of small (50–200 m high), conical volcanos that are built upon relatively old, fissured and sediment-covered lavas, and which in some cases are themselves fissured and faulted. This cell appears to be in a predominantly extensional phase with only small, isolated eruptions. These two spreading cells overlap in an anomalous zone between 23°05′ N and 23°17′ N that lacks a well-developed rift valley or neovolcanic zone, and may represent a slow-spreading ridge analogue to the overlapping spreading centers found at the East Pacific Rise. Despite the complexity of the MARK area, volcanic and tectonic activity appears to be confined to the 10–17 km wide rift valley floor. Block faulting along near-vertical, small-offset normal faults, accompanied by minor amounts of back-tilting (generally less than 5°), begins within a few km of the ridge axis and is largely completed by the time the crust is transported up into the rift valley walls. Features that appear to be constructional volcanic ridges formed in the median valley are preserved largely intact in the rift mountains. Mass-wasting and gullying of scarp faces, and sedimentation which buries low-relief seafloor features, are the major geological processes occurring outside of the rift valley. The morphological and structural heterogeneity within the MARK rift valley and in the flanking rift mountains documented in this study are largely the product of two spreading cells that evolve independently to the interplay between extensional tectonism and episodic variations in magma production rates.     

Absencing/presencing risk: Rethinking proximity and the experience of living with major technological hazards

There is now a substantial body of sociocultural research that has investigated the ways in which specific communities living in physical proximity with a variety of polluting or hazardous technological installations experience and respond to their exposure to the associated risk. Much of this research has sought to understand the apparent acceptance or acquiescence displayed by local populations towards established hazards of the kind that are typically resisted when the subject of siting proposals. However, recent theoretical contributions, produced largely outside the field of risk research, have problematised the objective distinction between proximity and distance. In this paper we explore the potential of some of these ideas for furthering our understanding of the relationship between place and the constitution of risk subjectivities. To do this we re-examine a number of existing sociocultural studies that are predicated on a localised approach and conceptualise the relationship of physically proximate sources of risk to everyday experience in terms of practices of ‘presencing’ and ‘absencing’. We conclude with some thoughts on the methodological and substantive implications of this reworking of proximity for future research into risk subjectivities.     

Particle-size effects on dissolved arsenic adsorption to an Australian laterite

In this study, arsenic adsorption to an Australian laterite has been examined for a particle-size range between 38 μm and 25 mm. The results show that particle size influences both kinetic and equilibrium characteristics of arsenic adsorption. The equilibrium adsorption capacity increases from around 100 mg kg^?1 for laterite particles coarser than 4 mm, to around 160 mg kg^?1 for laterite particles between 75 μm and 4 mm, and to over 200 mg kg^?1 for laterite particles finer than 75 μm. The kinetic adsorption data can be fitted with the pseudo-second-order reaction model, in particular for finer particles where the film diffusion and/or surface reaction are important processes. The model-fitted rate constant remains steady for laterite particles coarser than 2 mm, increases moderately with particle size in the range between 75 μm and 2 mm, and increases dramatically for laterite particles finer than 75 μm. These arsenic adsorption behaviours can be explained by the relative importance of two particle-size-dependent processes: quick external-surface adsorption (more important for fine particles) and slow intraparticle adsorption (more important for coarse particles). Most of the external-surface adsorption completes in the first hour of the experiment. To apply the studied laterite for dissolved arsenic removal, it is recommended that fine particles, in particular finer than 75 μm, should be used if the contact time is the limitation, and that coarse particles, in particular 2–4 mm, should be used if sufficient contact time is available.     

Mineralogical controls on environmental mobility of arsenic from historic mine processing residues,New Zealand

Processing of arsenopyrite ore took place at Blackwater Au mine, New Zealand, between 1908 and 1951 and no rehabilitation was undertaken after mine closure. High As concentrations in solid processing residues (up to 40 wt% As) are due to secondary As minerals. Site pH regimes vary from 4.1 to circum-neutral. Originally, all processed As was present as arsenolite (arsenic trioxide polymorph, As^III), a by-product of arsenopyrite roasting. Near the roaster, scorodite precipitated as a result of the high dissolved As concentration during arsenolite dissolution. The formation of scorodite has two major consequences. Firstly, the scorodite precipitate cements the ground in the vicinity of the roaster area, thereby creating an impermeable surface crust (up to 30 wt% As) and encapsulating weathered arsenolite grains within the cement. Secondly, formation of scorodite temporarily immobilizes some of the dissolved As that is generated during nearby arsenolite dissolution. Where all the available arsenolite has dissolved, scorodite becomes soluble, and the dissolved As concentrations are controlled by scorodite solubility, which is at least two orders of magnitudes lower than arsenolite solubility. Downstream Eh conditions fall below the As^V/As^III boundary, so that scorodite does not precipitate and dissolved As concentrations are controlled by arsenolite solubility. Dissolved As reaches up to 52 mg/L in places, and exceeds the current WHO drinking water guideline of 0.01 mg/L by 5200 times. This study shows that dissolved As concentrations in discharge waters at historic mine sites are dependent on the processing technology and associated mineralogy.     

Holocene climate and environmental history of East Greenland inferred from lake sediments

Prediction of future Arctic climate and environmental changes, as well as associated ice-sheet behavior, requires placing present-day warming and reduced ice extent into a long-term context. Here we present a record of Holocene climate and glacier fluctuations inferred from the paleolimnology of small lakes near Istorvet ice cap in East Greenland. Calibrated radiocarbon dates of organic remains indicate deglaciation of the region before ~10,500 years BP, after which time the ice cap receded rapidly to a position similar to or less extensive than present, and lake sediments shifted from glacio-lacustrine clay to relatively organic-rich gyttja. The lack of glacio-lacustrine sediments throughout most of the record suggests that the ice cap was similar to or smaller than present throughout most of the Holocene. This restricted ice extent suggests that climate was similar to or warmer than present, in keeping with other records from Greenland that indicate a warm early and middle Holocene. Middle Holocene magnetic susceptibility oscillations, with a ~200-year frequency in one of the lakes, may relate to solar influence on local catchment processes. Following thousands of years of restricted extent, Istorvet ice cap advanced to within 365 m of its late Holocene limit at ~AD 1150. Variability in the timing of glacial and climate fluctuations, as well as of sediment organic content changes among East Greenland lacustrine records, may be a consequence of local factors, such as elevation, continentality, water depth, turbidity, and seabirds, and highlights the need for a detailed spatial array of datasets to address questions about Holocene climate change.